>>> nut 2.8.1 Downloading wget --passive-ftp -nd -t 3 -O '/home/thomas/autobuild/instance-1/output-1/build/.nut-2.8.1.tar.gz.etv9KD/output' 'https://github.com/networkupstools/nut/releases/download/v2.8.1/nut-2.8.1.tar.gz' --2023-11-06 08:48:46-- https://github.com/networkupstools/nut/releases/download/v2.8.1/nut-2.8.1.tar.gz Resolving github.com (github.com)... 140.82.121.4 Connecting to github.com (github.com)|140.82.121.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/8129257/39bcbc9c-c857-43d2-80df-c19302a97796?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20231106%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20231106T074846Z&X-Amz-Expires=300&X-Amz-Signature=c66c9282e84e6fb59ebd147e8e8e0ca5696b2fdf57364ca6b64ffa58af70362a&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=8129257&response-content-disposition=attachment%3B%20filename%3Dnut-2.8.1.tar.gz&response-content-type=application%2Foctet-stream [following] --2023-11-06 08:48:46-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/8129257/39bcbc9c-c857-43d2-80df-c19302a97796?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20231106%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20231106T074846Z&X-Amz-Expires=300&X-Amz-Signature=c66c9282e84e6fb59ebd147e8e8e0ca5696b2fdf57364ca6b64ffa58af70362a&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=8129257&response-content-disposition=attachment%3B%20filename%3Dnut-2.8.1.tar.gz&response-content-type=application%2Foctet-stream Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.110.133, 185.199.109.133, 185.199.108.133, ... Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.110.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 4125263 (3.9M) [application/octet-stream] Saving to: '/home/thomas/autobuild/instance-1/output-1/build/.nut-2.8.1.tar.gz.etv9KD/output' 0K .......... .......... .......... .......... .......... 1% 8.45M 0s 50K .......... .......... .......... .......... .......... 2% 9.33M 0s 100K .......... .......... .......... .......... .......... 3% 65.7M 0s 150K .......... .......... .......... .......... .......... 4% 38.9M 0s 200K .......... .......... .......... .......... .......... 6% 13.4M 0s 250K .......... .......... .......... .......... .......... 7% 86.7M 0s 300K .......... .......... .......... .......... .......... 8% 121M 0s 350K .......... .......... .......... .......... .......... 9% 57.5M 0s 400K .......... .......... .......... .......... .......... 11% 86.1M 0s 450K .......... .......... .......... .......... .......... 12% 27.5M 0s 500K .......... .......... .......... .......... .......... 13% 36.0M 0s 550K .......... .......... .......... .......... .......... 14% 84.8M 0s 600K .......... .......... .......... .......... .......... 16% 134M 0s 650K .......... .......... .......... .......... .......... 17% 130M 0s 700K .......... .......... .......... .......... .......... 18% 107M 0s 750K .......... .......... .......... .......... .......... 19% 95.8M 0s 800K .......... .......... .......... .......... .......... 21% 119M 0s 850K .......... .......... .......... .......... .......... 22% 96.6M 0s 900K .......... .......... .......... .......... .......... 23% 130M 0s 950K .......... .......... .......... .......... .......... 24% 123M 0s 1000K .......... .......... .......... .......... .......... 26% 40.5M 0s 1050K .......... .......... .......... .......... .......... 27% 120M 0s 1100K .......... .......... .......... .......... .......... 28% 96.4M 0s 1150K .......... .......... .......... .......... .......... 29% 129M 0s 1200K .......... .......... .......... .......... .......... 31% 123M 0s 1250K .......... .......... .......... .......... .......... 32% 115M 0s 1300K .......... .......... .......... .......... .......... 33% 126M 0s 1350K .......... .......... .......... .......... .......... 34% 95.6M 0s 1400K .......... .......... .......... .......... .......... 35% 90.1M 0s 1450K .......... .......... .......... .......... .......... 37% 132M 0s 1500K .......... .......... .......... .......... .......... 38% 129M 0s 1550K .......... .......... .......... .......... .......... 39% 112M 0s 1600K .......... .......... .......... .......... .......... 40% 92.4M 0s 1650K .......... .......... .......... .......... .......... 42% 130M 0s 1700K .......... .......... .......... .......... .......... 43% 130M 0s 1750K .......... .......... .......... .......... .......... 44% 113M 0s 1800K .......... .......... .......... .......... .......... 45% 101M 0s 1850K .......... .......... .......... .......... .......... 47% 111M 0s 1900K .......... .......... .......... .......... .......... 48% 97.0M 0s 1950K .......... .......... .......... .......... .......... 49% 123M 0s 2000K .......... .......... .......... .......... .......... 50% 128M 0s 2050K .......... .......... .......... .......... .......... 52% 130M 0s 2100K .......... .......... .......... .......... .......... 53% 90.7M 0s 2150K .......... .......... .......... .......... .......... 54% 124M 0s 2200K .......... .......... .......... .......... .......... 55% 113M 0s 2250K .......... .......... .......... .......... .......... 57% 94.6M 0s 2300K .......... .......... .......... .......... .......... 58% 131M 0s 2350K .......... .......... .......... .......... .......... 59% 91.1M 0s 2400K .......... .......... .......... .......... .......... 60% 130M 0s 2450K .......... .......... .......... .......... .......... 62% 129M 0s 2500K .......... .......... .......... .......... .......... 63% 112M 0s 2550K .......... .......... .......... .......... .......... 64% 5.28M 0s 2600K .......... .......... .......... .......... .......... 65% 157M 0s 2650K .......... .......... .......... .......... .......... 67% 269M 0s 2700K .......... .......... .......... .......... .......... 68% 265M 0s 2750K .......... .......... .......... .......... .......... 69% 162M 0s 2800K .......... .......... .......... .......... .......... 70% 301M 0s 2850K .......... .......... .......... .......... .......... 71% 180M 0s 2900K .......... .......... .......... .......... .......... 73% 282M 0s 2950K .......... .......... .......... .......... .......... 74% 259M 0s 3000K .......... .......... .......... .......... .......... 75% 286M 0s 3050K .......... .......... .......... .......... .......... 76% 269M 0s 3100K .......... .......... .......... .......... .......... 78% 193M 0s 3150K .......... .......... .......... .......... .......... 79% 140M 0s 3200K .......... .......... .......... .......... .......... 80% 266M 0s 3250K .......... .......... .......... .......... .......... 81% 309M 0s 3300K .......... .......... .......... .......... .......... 83% 300M 0s 3350K .......... .......... .......... .......... .......... 84% 179M 0s 3400K .......... .......... .......... .......... .......... 85% 284M 0s 3450K .......... .......... .......... .......... .......... 86% 284M 0s 3500K .......... .......... .......... .......... .......... 88% 243M 0s 3550K .......... .......... .......... .......... .......... 89% 263M 0s 3600K .......... .......... .......... .......... .......... 90% 277M 0s 3650K .......... .......... .......... .......... .......... 91% 269M 0s 3700K .......... .......... .......... .......... .......... 93% 230M 0s 3750K .......... .......... .......... .......... .......... 94% 281M 0s 3800K .......... .......... .......... .......... .......... 95% 306M 0s 3850K .......... .......... .......... .......... .......... 96% 270M 0s 3900K .......... .......... .......... .......... .......... 98% 264M 0s 3950K .......... .......... .......... .......... .......... 99% 260M 0s 4000K .......... .......... ........ 100% 293M=0.06s 2023-11-06 08:48:47 (71.1 MB/s) - '/home/thomas/autobuild/instance-1/output-1/build/.nut-2.8.1.tar.gz.etv9KD/output' saved [4125263/4125263] nut-2.8.1.tar.gz: OK (sha256: 7da48ee23b1f0d8d72560bb0af84f5c5ae4dbe35452b84cb49840132e47f099c) >>> nut 2.8.1 Extracting gzip -d -c /home/thomas/autobuild/instance-1/dl/nut/nut-2.8.1.tar.gz | tar --strip-components=1 -C /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1 -xf - >>> nut 2.8.1 Patching Applying 0001-m4-nut_compiler_family.m4-fix-cross-compilation.patch using patch: patching file m4/nut_compiler_family.m4 >>> nut 2.8.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> nut 2.8.1 Configuring >>> nut 2.8.1 Autoreconfiguring libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:101: installing './compile' configure.ac:87: installing './missing' clients/Makefile.am: installing './depcomp' >>> nut 2.8.1 Patching libtool patching file /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). >>> nut 2.8.1 Checking configure (powerpc64/powerpc64le) support/scripts/fix-configure-powerpc64.sh /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1 (cd /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/ && rm -rf config.cache && PATH="/home/thomas/autobuild/instance-1/output-1/host/bin:/home/thomas/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ar" AS="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-as" LD="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld" NM="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-nm" CC="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc" GCC="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc" CPP="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-cpp" CXX="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++" FC="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gfortran" F77="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gfortran" RANLIB="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ranlib" READELF="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-readelf" STRIP="/bin/true" OBJCOPY="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-objcopy" OBJDUMP="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/thomas/autobuild/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/thomas/autobuild/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/thomas/autobuild/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/thomas/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/thomas/autobuild/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-as" DEFAULT_LINKER="/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=2" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=2" LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/home/thomas/autobuild/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=no ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no ax_cv_check_cflags__Werror__Wno_unknown_warning_option=no ax_cv_check_cxxflags__Werror__Wno_unknown_warning_option=no ac_cv_func_strcasecmp=yes ac_cv_func_strdup=yes ac_cv_func_strncasecmp=yes ax_cv__printf_string_null=yes CONFIG_SITE=/dev/null ./configure --target=powerpc64le-buildroot-linux-gnu --host=powerpc64le-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --with-freeipmi --with-cgi --with-libltdl --with-usb --without-neon --without-snmp --with-ssl ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for CONFIG_FLAGS... --target=powerpc64le-buildroot-linux-gnu --host=powerpc64le-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --with-freeipmi --with-cgi --with-libltdl --with-usb --without-neon --without-snmp --with-ssl Network UPS Tools version 2.8.1 checking build system type... x86_64-pc-linux-gnu checking host system type... powerpc64le-buildroot-linux-gnu checking target system type... powerpc64le-buildroot-linux-gnu checking for host system name... ubuntu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc64le-buildroot-linux-gnu-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for autoconf macro to enable system extensions... yes checking whether make supports the include directive... yes (GNU style) checking for powerpc64le-buildroot-linux-gnu-gcc... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc accepts -g... yes checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc option to enable C11 features... none needed checking whether /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc understands -c and -o together... yes checking dependency style of /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for sys/time.h... yes checking for time.h... yes checking for sys/socket.h... yes checking for netdb.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking whether to enable maintainer-specific portions of Makefiles... no checking pkg-config is at least version 0.9.0... yes checking whether usable PKG_CONFIG was already detected by autoconf... yes: /home/thomas/autobuild/instance-1/output-1/host/bin/pkg-config configure: checking for autoconf macro support of pkg-config (/home/thomas/autobuild/instance-1/output-1/host/bin/pkg-config) configure: checking for autoconf macro support of pkg-config module checker checking for dummy_PKG_CONFIG... yes checking for realpath... realpath checking how to run the C preprocessor... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-cpp checking whether the compiler supports GNU C++... yes checking whether /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ accepts -g... yes checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ option to enable C++11 features... none needed checking dependency style of /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++... none checking whether /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ understands -c and -o together... yes checking whether ln -s works... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ar... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ar checking for powerpc64le-buildroot-linux-gnu-ranlib... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ranlib checking whether byte ordering is bigendian... (cached) no checking for inline... inline checking for flexible array members... yes checking for variable-length arrays... yes checking if CC compiler family is GCC... yes checking if CXX compiler family is GCC... yes checking if CPP preprocessor family is GCC... yes checking if CC compiler family is clang... no checking if CXX compiler family is clang... no checking if CPP preprocessor family is clang... no checking Compact version of C compiler... "powerpc64le-linux-gcc.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0" checking Compact version of C++ compiler... "powerpc64le-linux-g++.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0" checking Compact version of C preprocessor... "powerpc64le-linux-cpp.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0" configure: Detecting support for additional compiler flags checking whether C compiler accepts -Qunused-arguments... no checking whether C++ compiler accepts -Qunused-arguments... no checking whether C compiler accepts -Wno-reserved-identifier... yes configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them checking whether C++ compiler accepts -Wno-reserved-identifier... yes configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them configure: NOT checking for options to request colorized compiler output (pass --enable-Wcolor for that) checking whether C compiler accepts -Wno-unknown-warning-option... (cached) no checking whether C++ compiler accepts -Wno-unknown-warning-option... (cached) no checking whether C compiler accepts -std=gnu99... yes configure: Defaulting C standard support to GNU C99 on a GCC or CLANG compatible compiler checking whether C++ compiler accepts -std=gnu++11... yes configure: Defaulting C++ standard support to GNU C++11 on a GCC or CLANG compatible compiler checking for pragma GCC diagnostic push and pop (outside functions)... yes checking for pragma clang diagnostic push and pop (outside functions)... no checking for pragma GCC diagnostic push and pop (inside functions)... yes checking for pragma clang diagnostic push and pop (inside functions)... no checking for pragma GCC diagnostic ignored "-Wunused-function"... yes checking for pragma GCC diagnostic ignored "-Wformat-nonliteral"... yes checking for pragma GCC diagnostic ignored "-Wformat-nonliteral" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-security"... yes checking for pragma GCC diagnostic ignored "-Wformat-security" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-truncation"... yes checking for pragma GCC diagnostic ignored "-Wformat-truncation" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wstringop-truncation"... yes checking for pragma GCC diagnostic ignored "-Wstringop-truncation" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wtype-limits"... yes checking for pragma GCC diagnostic ignored "-Wtype-limits" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Warray-bounds"... yes checking for pragma GCC diagnostic ignored "-Warray-bounds" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wtautological-type-limit-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-type-limit-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-constant-out-of-range-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-constant-out-of-range-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-unsigned-zero-compare"... no checking for pragma GCC diagnostic ignored "-Wtautological-unsigned-zero-compare" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wtautological-compare"... yes checking for pragma GCC diagnostic ignored "-Wtautological-compare" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wsign-compare"... yes checking for pragma GCC diagnostic ignored "-Wsign-compare" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wsign-conversion"... yes checking for pragma GCC diagnostic ignored "-Wsign-conversion" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wunreachable-code-break"... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-break" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-return"... no checking for pragma GCC diagnostic ignored "-Wunreachable-code-return" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wunreachable-code"... yes checking for pragma GCC diagnostic ignored "-Wunreachable-code" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wformat-overflow"... yes checking for pragma GCC diagnostic ignored "-Wformat-overflow" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wcovered-switch-default"... no checking for pragma GCC diagnostic ignored "-Wcovered-switch-default" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wextra-semi-stmt"... no checking for pragma GCC diagnostic ignored "-Wextra-semi-stmt" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wcast-align"... yes checking for pragma GCC diagnostic ignored "-Wcast-align" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wcast-function-type-strict"... no checking for pragma GCC diagnostic ignored "-Wcast-function-type-strict" (outside functions)... no checking for pragma GCC diagnostic ignored "-Wstrict-prototypes"... yes checking for pragma GCC diagnostic ignored "-Wstrict-prototypes" (outside functions)... yes checking for pragma GCC diagnostic ignored "-Wassign-enum"... no checking for pragma GCC diagnostic ignored "-Wassign-enum" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat-pedantic"... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat-pedantic" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat"... no checking for C++ pragma GCC diagnostic ignored "-Wc++98-compat" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wglobal-constructors"... no checking for C++ pragma GCC diagnostic ignored "-Wglobal-constructors" (outside functions)... no checking for C++ pragma GCC diagnostic ignored "-Wexit-time-destructors"... no checking for C++ pragma GCC diagnostic ignored "-Wexit-time-destructors" (outside functions)... no checking for pragma BOGUSforTest... no checking for pragma BOGUSforTest (outside functions)... no checking for pragma GCC diagnostic ignored "-WBOGUSforTest"... no checking for pragma GCC diagnostic ignored "-WBOGUSforTest" (outside functions)... no checking for __attribute__((unused)) for function arguments... yes checking for __attribute__((unused)) for functions... yes checking for __attribute__((noreturn))... yes checking for at least some __attribute__ support... yes checking for practical support to printf("%s", NULL)... (cached) yes checking for flock... yes checking for lockf... yes checking for fcvt... yes checking for fcvtl... no checking for dup... yes checking for dup2... yes checking for abs_val... no checking for abs... yes checking for float.h... yes checking for math.h... yes checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc options needed to detect all undeclared functions... none needed checking whether fabs is declared... yes checking whether fabsf is declared... yes checking whether fabsl is declared... yes checking whether pow10 is declared... no checking whether round is declared... yes checking for limits.h... yes checking for stdlib.h... (cached) yes checking whether realpath is declared... yes checking for signal.h... yes checking for sys/signal.h... yes checking for sys/resource.h... yes checking for struct rlimit and getrlimit()... ok checking for poll.h... yes checking for semaphore.h... yes checking for sem_t, sem_init() and sem_destroy()... ok checking for sem_init in -lrt... yes checking for cfsetispeed... yes checking for tcsendbreak... yes checking for seteuid... yes checking for setsid... yes checking for getpassphrase... no checking for on_exit... yes checking for setlogmask... yes checking whether LOG_UPTO is declared... yes configure: ----------------------------------------------------------------------- The next few tests look for required C library routines; if something is not found, you may need to enable a different C standard or extension macro version. You may also have to configure without extreme warning levels since autotools tests fail those on their own and assume system lacks stuff (although note we try to not involve standard -W* flags here). ----------------------------------------------------------------------- checking for strtok_r... yes checking for fileno... yes checking for sigemptyset... yes checking for sigaction... yes checking for localtime_r... yes checking for localtime_s... no checking for gmtime_r... yes checking for gmtime_s... no checking for at least one gmtime implementation... yes checking for at least one localtime implementation... yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for strcasecmp(s1,s2)... (cached) yes checking for strncasecmp(s1,s2,n)... (cached) yes checking for strlwr(s)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them no configure: WARNING: Optional C library routine strlwr not found checking for strsep(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strstr(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strcasestr(s1,s2)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strptime(s1,s2,tm)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for clock_gettime(CLOCK_MONOTONIC,ts)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for strnlen(s1,s2,tm)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them no configure: WARNING: Optional C library routine strnlen not found; a fallback implementation will be built in checking for strdup(s)... (cached) yes checking for sys/select.h... yes checking for suseconds_t... yes checking for useconds_t... yes checking for usleep(us)... yes checking whether ln -sr works... yes checking for unsigned long long int... yes checking for vsnprintf... yes checking for snprintf... yes checking for setenv... yes checking for strerror... yes checking for atexit... yes checking whether optind is declared... yes checking for getopt.h... yes checking for getopt_long... yes checking whether uu_lock is declared... no checking whether __func__ is declared... yes checking for library containing gethostbyname... none required checking for library containing connect... none required checking for sys/modem.h... no checking for stdarg.h... yes checking for varargs.h... no checking for library containing pthread_create... none required checking for library containing pthread_tryjoin_np... none required checking for windows.h... no checking for winsock2.h... no checking for ws2tcpip.h... no checking for socklen_t... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netdb.h... (cached) yes checking types of arguments for getnameinfo... const struct sockaddr *,socklen_t,socklen_t,int checking for inet_ntop() with IPv4 and IPv6 support... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for inet_pton() with IPv4 and IPv6 support... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for struct pollfd... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for python... python configure: WARNING: A python program name without a specific version number was requested (may be a symlink prone to change over time): /home/thomas/autobuild/instance-1/output-1/host/bin/python checking python interpeter to call... /home/thomas/autobuild/instance-1/output-1/host/bin/python (sys.version_info(major=3, minor=11, micro=6, releaselevel='final', serial=0)) checking python site-packages location... /home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages checking for python2... python2 checking python2 interpeter to call... /usr/bin/python2 (sys.version_info(major=2, minor=7, micro=18, releaselevel='final', serial=0)) checking python2 site-packages location... /usr/local/lib/python2.7/dist-packages configure: WARNING: A python3 program name was not specified during configuration, will default to '/home/thomas/autobuild/instance-1/output-1/host/bin/python3.11' (derived from --with-python setting which has a suitable version) checking python3 interpeter to call... /home/thomas/autobuild/instance-1/output-1/host/bin/python3.11 (sys.version_info(major=3, minor=11, micro=6, releaselevel='final', serial=0)) checking python3 site-packages location... /home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages checking which drivers to build... all checking for --with-all... not given checking for libregex version via pkg-config... none found checking for regex.h... yes checking whether regexec is declared... yes checking whether regcomp is declared... yes checking for library containing regcomp, regexec... none required checking for libusb-1.0 version via pkg-config... 1.0.26 found checking for libusb(-0.1) version via pkg-config... none found checking for libusb-config... no checking for libusb preferred version... 1.0.26 (libusb-1.0) checking for libusb cflags... -I/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/include/libusb-1.0 checking for libusb ldflags... -L/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/lib -lusb-1.0 checking for libusb.h... yes checking for libusb_init... yes checking for libusb_strerror... yes checking for libusb_kernel_driver_active... yes checking for libusb_set_auto_detach_kernel_driver... yes checking for libusb_detach_kernel_driver... yes checking for libusb_detach_kernel_driver_np... no checking for usb_detach_kernel_driver_np... no checking for libusb_get_port_number... yes checking size of void *... 8 checking for net-snmp-config-64... no checking for net-snmp-config... no checking for Net-SNMP version via pkg-config... none found checking for Net-SNMP cflags... checking for Net-SNMP libs... checking for net-snmp/net-snmp-config.h... no checking for init_snmp... no checking for libneon version via pkg-config (0.25.0 minimum required)... none found checking for libneon cflags... -I/usr/include/neon -I/usr/local/include/neon checking for libneon ldflags... -lneon checking for ne_xmlreq.h... no checking for ne_xml_dispatch_request... no checking for LLNC libpowerman version via pkg-config... 'none' found checking for libpowerman cflags... checking for libpowerman libs... checking for libpowerman.h... no checking for pm_connect... no checking for libmodbus version via pkg-config... none found checking for libmodbus cflags... -I/usr/include/modbus checking for libmodbus ldflags... -lmodbus checking for modbus.h... no checking for modbus_new_rtu... no checking for modbus_new_tcp... no checking for modbus_set_byte_timeout... no checking for modbus_set_response_timeout... no checking for modbus_new_rtu_usb... no checking for libgpiod version via pkg-config (1.0.0 minimum required)... 1.6.4 found checking for libgpiod cflags... checking for libgpiod ldflags... -L/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/lib -lgpiod checking for gpiod.h... yes checking for gpiod_chip_open_by_name... yes checking for gpiod_chip_close... yes checking for avahi-core version via pkg-config (0.6.30 minimum required)... none found checking for avahi-client version via pkg-config (0.6.30 minimum required)... none found checking for avahi cflags... -I/usr/local/include -I/usr/include -L/usr/local/lib -L/usr/lib checking for avahi ldflags... -lavahi-core -lavahi-client checking for avahi-common/malloc.h... no checking for avahi_free... no checking for msgfmt... /home/thomas/autobuild/instance-1/output-1/host/bin/msgfmt checking for sys/termios.h... yes checking for struct termios and speed_t... ok checking whether we can build serial drivers... yes checking whether to build serial drivers... yes checking whether to build USB drivers... yes (libusb-1.0) checking whether to build neon based XML driver... no checking whether to enable Avahi support... no checking whether to build Powerman PDU client driver... no checking whether to build Modbus driver... no checking for FreeIPMI version via pkg-config... 1.6.11 found checking for FreeIPMI cflags... checking for FreeIPMI ldflags... -L/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/lib -lfreeipmi -lipmimonitoring checking for freeipmi/freeipmi.h... yes checking for ipmi_monitoring.h... yes checking for library containing ipmi_ctx_create... none required checking for library containing ipmi_ctx_find_inband... none required checking for library containing ipmi_monitoring_init... none required checking for library containing ipmi_monitoring_sensor_read_record_id... none required checking for library containing ipmi_sdr_cache_ctx_destroy... no checking for library containing ipmi_sdr_ctx_destroy... none required checking whether to build IPMI driver... yes (FreeIPMI) checking whether to build GPIO driver... yes libgpiod checking whether to build Mac OS X meta-driver... no checking for linux/i2c-dev.h... yes checking for i2c/smbus.h... no checking whether i2c_smbus_access is declared... no checking whether i2c_smbus_read_byte_data is declared... no checking whether i2c_smbus_write_byte_data is declared... no checking whether i2c_smbus_read_word_data is declared... no checking whether i2c_smbus_write_word_data is declared... no checking whether i2c_smbus_read_block_data is declared... no checking for library containing i2c_smbus_read_byte, i2c_smbus_access, i2c_smbus_read_byte_data, i2c_smbus_write_byte_datai2c_smbus_write_byte_data, i2c_smbus_read_word_data, i2c_smbus_write_word_data, i2c_smbus_read_block_data... no checking whether to build i2c based drivers... no checking for OpenSSL version via pkg-config... 3.1.4 found checking for OpenSSL cflags... checking for OpenSSL ldflags... -L/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/lib -lssl -lcrypto checking for openssl/ssl.h... yes checking for SSL_CTX_new... yes checking whether to enable SSL support... yes (OpenSSL) checking for tcpd.h... no checking for library containing yp_get_default_domain... no checking for library containing request_init... no checking whether to enable libwrap (tcp-wrappers) support... no checking for libltdl cflags... checking for libltdl ldflags... checking for ltdl.h... yes checking for library containing lt_dlinit... -lltdl checking whether to enable libltdl (Libtool dlopen abstraction) support... yes checking whether to build nut-scanner... yes checking for gd version via pkg-config... 2.3.3 found checking for gd include flags... -I/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/include/libpng16 -I/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/include/freetype2 checking for gd library flags... -L/home/thomas/autobuild/instance-1/output-1/host/bin/../powerpc64le-buildroot-linux-gnu/sysroot/usr/lib -lgd checking for gd.h... yes checking for gdfontmb.h... yes checking for library containing gdImagePng... none required checking whether to build CGI programs... yes checking if we can and should install NUT-Monitor desktop application... no: Missing some or all of these Python3 modules: 're,glob,codecs,PyQt5.uic,configparser' and some or all of these Python2 modules: 're,glob,codecs,gtk,gtk.glade,gobject,ConfigParser' checking if we can and should install PyNUT module... :1: DeprecationWarning: 'telnetlib' is deprecated and slated for removal in Python 3.13 :1: DeprecationWarning: 'telnetlib' is deprecated and slated for removal in Python 3.13 yes checking whether to install NUT-Monitor desktop application... no checking whether to install PyNUT binding module... yes checking for cppcheck... no checking if cppcheck version is okay (minimum required 1.0)... no checking whether to run cppcheck among default make check target... no checking whether to run NIT among default make check target... no checking for aspell... /usr/bin/aspell checking for aspell version... 0.60.8 checking for aspell "lib" filtering resources directory... /usr/lib/aspell checking for aspell "share" filtering resources directory... /usr/share/aspell checking for aspell "tex" filtering resources directory... /usr/lib/aspell/x86_64-linux-gnu checking if aspell version can do our documentation spell checks (minimum required 0.60.6)... yes checking if we have all the tools mandatory for documentation spell checks... yes checking whether to run spellcheck among default make check target... yes checking for asciidoc... no checking for a2x... no checking for dblatex... /usr/bin/dblatex checking for dblatex version... 0.3.11py3 found checking for xsltproc... /home/thomas/autobuild/instance-1/output-1/host/bin/xsltproc checking for xsltproc version... 21105 found checking for xmllint... /home/thomas/autobuild/instance-1/output-1/host/bin/xmllint checking for xmllint version... 21105 found checking for source-highlight... no checking if asciidoc version can build manpages (minimum required 8.6.3)... no checking if a2x version can build manpages (minimum required 8.6.3)... no checking if xsltproc is present (mandatory for man page regeneration)... yes checking if xmllint is present (mandatory for man page regeneration)... yes checking if we have all the tools mandatory for man page regeneration... no checking if source-highlight is present (preferable for documentation generation)... no checking whether to build and install documentation... no checking whether to build specific documentation format(s)... no checking for powerpc64le-buildroot-linux-gnu-ar... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ar checking the archiver (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ar) interface... ar checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld checking if the linker (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-nm checking the name lister (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-nm) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to powerpc64le-buildroot-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld option to reload object files... -r checking for powerpc64le-buildroot-linux-gnu-objdump... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-objdump checking how to recognize dependent libraries... pass_all checking for powerpc64le-buildroot-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for powerpc64le-buildroot-linux-gnu-ar... (cached) /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ar checking for archiver @FILE support... @ checking for powerpc64le-buildroot-linux-gnu-strip... (cached) /bin/true checking for powerpc64le-buildroot-linux-gnu-ranlib... (cached) /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-ranlib checking command to parse /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc-nm output from /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for powerpc64le-buildroot-linux-gnu-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc static flag -static works... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc supports -c -o file.o... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc linker (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ -E checking for ld used by /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++... /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld checking if the linker (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld) is GNU ld... yes checking whether the /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ linker (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld) supports shared libraries... yes checking for /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ option to produce PIC... -fPIC -DPIC checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ PIC flag -fPIC -DPIC works... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ static flag -static works... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ supports -c -o file.o... yes checking if /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ supports -c -o file.o... (cached) yes checking whether the /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ linker (/home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether to build and install the development files... yes checking for powerpc64le-buildroot-linux-gnu-windmc... no checking for windmc... no checking for powerpc64le-buildroot-linux-gnu-windres... no checking for windres... no checking setting for Default installation prefix path... "/usr" checking if requested state path... default checking setting for State file path... "/var/state/ups" checking if requested alt pid path... specified checking setting for Unprivileged PID file path... "/var/run/upsd" checking if requested pidpath... default checking setting for Privileged PID file path... "/run" checking if requested default upsmon POWERDOWNFLAG path... default checking if requested driver path... default checking setting for Driver program path... "/usr/bin" checking if requested cgi path... default checking setting for CGI program path... "/usr/cgi-bin" checking if requested html path... default checking setting for HTML file path... "/usr/html" checking network port number... 3493 checking facility for syslog... LOG_DAEMON checking which driver man pages to install... none (manpages disabled) checking whether to force nut_version.h generation for every make run... no checking whether to strip debug symbols... no checking whether to install pkg-config *.pc files... using ${libdir}/pkgconfig => /usr/lib/pkgconfig checking whether to make Solaris SVR4 packages... no checking whether to make Solaris IPS packages... no checking whether to install Solaris SMF files... no checking whether to install Solaris SVR4 (legacy) init-script files... no checking whether to install systemd unit files... no checking whether to consider basic systemd support... no checking whether to install systemd shutdown files... no checking whether to install systemd tmpfiles files... no checking for systemd-tmpfiles... /usr/bin/systemd-tmpfiles checking for libsystemd version via pkg-config... none found checking for libsystemd cflags... checking for libsystemd ldflags... -lsystemd checking for systemd/sd-daemon.h... no checking for sd_notify... no checking whether requested and can build binaries with tighter systemd integration support... no checking for systemd-analyze... /usr/bin/systemd-analyze checking if your systemd version supports Type=notify... yes checking if your systemd version supports Type=notify-reload... /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/./systemd-analyze-qswTn7.service:5: Failed to parse service type, ignoring: notify-reload no checking whether to build with tighter systemd support... no checking for C++11 support in current compiler... yes, out of the box checking whether to build C++11 codebase (client library, etc.)... yes checking for have_cppunit... checking for CPPUNIT... yes yes checking if current toolkit can build and run cppunit tests (e.g. no ABI issues, related segfaults, etc.)... configure: WARNING: Current build is a cross-build, so not running test binaries, just linking them yes checking for impact from --enable-cppunit option - should we build cppunit tests?... yes checking whether to build C++ tests with CPPUNIT... yes checking whether to install Augeas configuration-management lenses... using /usr/share/augeas/lenses/dist checking for augparse... no checking whether to enable Augeas configuration-management lenses tests... no checking whether to install hotplug rules... no checking whether to install udev rules... using /lib/udev checking whether to install FreeBSD devd.conf file... no checking for valgrind... no checking whether valgrind is usable on current platform... no checking whether to use valgrind for memory-leak testing... no checking whether to build cppunit tests using valgrind support... no checking setting for Config file path... "/etc" checking setting for Data file path... "/usr/share" checking setting for Tool program path... "/usr/bin" checking setting for System program path... "/usr/sbin" checking setting for System library path... "/usr/lib" checking setting for System exec-library path... "/usr/libexec" checking whether to build SNMP drivers... no checking whether to build SNMP drivers with statically linked lib(net)snmp... no checking host env spec we run on... "powerpc64le-buildroot-linux-gnu" checking host env spec we built on... "x86_64-pc-linux-gnu" checking host env spec we built for... "powerpc64le-buildroot-linux-gnu" checking host OS short spec we run on... "powerpc64le-linux-gnu" checking host OS short spec we built on... "x86_64-linux-gnu" checking host OS short spec we built for... "powerpc64le-linux-gnu" checking whether compiler suggests a MULTIARCH value... checking if requested user to run as... specified checking setting for User to run as... "nut" checking if requested group membership of user to run as... specified checking setting for Group of user to run as... "nut" checking whether to pre-set warnings (from 'auto')... "gcc-medium" checking whether to make warnings fatal... "no" checking for string.h... (cached) yes checking whether we should disable string built-ins... no, they are not a problem checking for arpa/inet.h... yes checking whether we should disable htonl/ntohl built-ins... no, they are not a problem checking for top build dir for this configure run... "/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1" checking whether to customize /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd/nut-common-tmpfiles.conf.in for this system... done configure: Generating "data" files from templates, see below for executable scripts configure: Generating templated script files that should be marked executable configure: Generating templated script files whose templates might have been generated (or not) by autogen.sh calling our helper scripts checking whether to generate scripts/augeas/nutupsconf.aug... yes checking whether to generate scripts/udev/nut-usbups.rules... yes checking whether to generate scripts/devd/nut-usb.conf... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating clients/Makefile config.status: creating common/Makefile config.status: creating conf/Makefile config.status: creating conf/upsmon.conf.sample config.status: creating conf/upssched.conf.sample config.status: creating data/html/header.html config.status: creating data/html/Makefile config.status: creating data/Makefile config.status: creating data/driver.list config.status: creating docs/Makefile config.status: creating docs/cables/Makefile config.status: creating docs/docinfo.xml config.status: creating docs/man/Makefile config.status: creating drivers/Makefile config.status: creating include/Makefile config.status: creating lib/libupsclient.pc config.status: creating lib/libnutclient.pc config.status: creating lib/libnutclientstub.pc config.status: creating lib/libnutscan.pc config.status: creating lib/Makefile config.status: creating scripts/Aix/nut-aix.spec config.status: creating scripts/RedHat/ups config.status: creating scripts/augeas/Makefile config.status: creating scripts/augeas/nutnutconf.aug config.status: creating scripts/augeas/nutupsdconf.aug config.status: creating scripts/augeas/nutupsdusers.aug config.status: creating scripts/augeas/nutupsmonconf.aug config.status: creating scripts/augeas/nutupsschedconf.aug config.status: creating scripts/augeas/nuthostsconf.aug config.status: creating scripts/augeas/nutupssetconf.aug config.status: creating scripts/avahi/nut.service config.status: creating scripts/devd/Makefile config.status: creating scripts/hotplug/Makefile config.status: creating scripts/hotplug/libhidups config.status: creating scripts/HP-UX/nut.psf config.status: creating scripts/python/Makefile config.status: creating scripts/python/module/PyNUT.py config.status: creating scripts/upsdrvsvcctl/Makefile config.status: creating scripts/systemd/Makefile config.status: creating scripts/systemd/nut-common-tmpfiles.conf config.status: creating scripts/systemd/nut-driver@.service config.status: creating scripts/systemd/nut-monitor.service config.status: creating scripts/systemd/nut-server.service config.status: creating scripts/systemd/nut-driver-enumerator.service config.status: creating scripts/systemd/nut-driver-enumerator.path config.status: creating scripts/Solaris/nut-driver-enumerator.xml config.status: creating scripts/Solaris/nut-driver.xml config.status: creating scripts/Solaris/nut-monitor.xml config.status: creating scripts/Solaris/nut-server.xml config.status: creating scripts/Solaris/nut.xml config.status: creating scripts/Solaris/Makefile config.status: creating scripts/Solaris/pkginfo config.status: creating scripts/udev/Makefile config.status: creating scripts/udev/nut-ipmipsu.rules config.status: creating scripts/ufw/Makefile config.status: creating scripts/ufw/nut.ufw.profile config.status: creating scripts/Windows/Makefile config.status: creating scripts/Windows/Installer/NUT-Installer.xml config.status: creating scripts/Makefile config.status: creating server/Makefile config.status: creating tools/Makefile config.status: creating tools/nut-scanner/Makefile config.status: creating tests/Makefile config.status: creating tests/NIT/Makefile config.status: creating Makefile config.status: creating lib/libupsclient-config config.status: creating scripts/Aix/nut.init config.status: creating scripts/HP-UX/postinstall config.status: creating scripts/RedHat/upsd config.status: creating scripts/RedHat/upsmon config.status: creating scripts/python/app/NUT-Monitor-py2gtk2 config.status: creating scripts/python/app/NUT-Monitor-py3qt5 config.status: creating scripts/augeas/gen-nutupsconf-aug.py config.status: creating scripts/python/module/test_nutclient.py config.status: creating scripts/upsdrvsvcctl/nut-driver-enumerator.sh config.status: creating scripts/upsdrvsvcctl/upsdrvsvcctl config.status: creating scripts/systemd/nutshutdown config.status: creating scripts/Solaris/svc-nut-server config.status: creating scripts/Solaris/svc-nut-monitor config.status: creating scripts/Solaris/precheck.py config.status: creating scripts/Solaris/preinstall config.status: creating scripts/Solaris/postinstall config.status: creating scripts/Solaris/preremove config.status: creating scripts/Solaris/postremove config.status: creating scripts/Solaris/preproto.pl config.status: creating scripts/Solaris/nut config.status: creating tools/gitlog2changelog.py config.status: creating tools/nut-snmpinfo.py config.status: creating scripts/augeas/nutupsconf.aug config.status: creating scripts/udev/nut-usbups.rules config.status: creating scripts/devd/nut-usb.conf config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls NUT Configuration summary: ========================== * configured version: 2.8.1 * build serial drivers: yes * build USB drivers: yes (libusb-1.0) * build neon based XML driver: no * enable Avahi support: no * build Powerman PDU client driver: no * build Modbus driver: no * build IPMI driver: yes (FreeIPMI) * build GPIO driver: yes libgpiod * build Mac OS X meta-driver: no * build i2c based drivers: no * enable SSL support: yes (OpenSSL) * enable libwrap (tcp-wrappers) support: no * enable libltdl (Libtool dlopen abstraction) support: yes * build nut-scanner: yes * build CGI programs: yes * install NUT-Monitor desktop application: no * install PyNUT binding module: yes * use default Python interpreter: /home/thomas/autobuild/instance-1/output-1/host/bin/python * use specific Python2 interpreter: /usr/bin/python2 * use specific Python3 interpreter: /home/thomas/autobuild/instance-1/output-1/host/bin/python3.11 * build and install documentation: no * build specific documentation format(s): no * build and install the development files: yes * consider basic SMF support: no * consider basic systemd support: no * build with tighter systemd support: no * build C++11 codebase (client library, etc.): yes * build C++ tests with CPPUNIT: yes * build SNMP drivers: no * build SNMP drivers with statically linked lib(net)snmp: no * User to run as: nut * Group of user to run as: nut NUT Paths: ---------- * Default installation prefix path: /usr * State file path: /var/state/ups * Unprivileged PID file path: /var/run/upsd * Privileged PID file path: /run * Driver program path: /usr/bin * CGI program path: /usr/cgi-bin * HTML file path: /usr/html * Config file path: /etc * Data file path: /usr/share * Tool program path: /usr/bin * System program path: /usr/sbin * System library path: /usr/lib * System exec-library path: /usr/libexec NUT Paths for third-party integrations: --------------------------------------- * Default Python interpreter site-packages: /home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages * Specific Python2 interpreter site-packages: /usr/local/lib/python2.7/dist-packages * Specific Python3 interpreter site-packages: /home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages * pkg-config *.pc directory: ${libdir}/pkgconfig => /usr/lib/pkgconfig * Augeas lenses directory: /usr/share/augeas/lenses/dist * Udev rules directory: /lib/udev NUT Build/Target system info: ----------------------------- * Compact version of C compiler: powerpc64le-linux-gcc.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0 * Compact version of C++ compiler: powerpc64le-linux-g++.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0 * Compact version of C preprocessor: powerpc64le-linux-cpp.br_real (Buildroot 2021.11-8547-g7e65a1a) 13.2.0 * host env spec we run on: powerpc64le-buildroot-linux-gnu * host env spec we built on: x86_64-pc-linux-gnu * host env spec we built for: powerpc64le-buildroot-linux-gnu * host OS short spec we run on: powerpc64le-linux-gnu * host OS short spec we built on: x86_64-linux-gnu * host OS short spec we built for: powerpc64le-linux-gnu NUT Compiler settings: ---------------------- * CC : /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-gcc * CFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=2 -Wno-reserved-identifier -std=gnu99 -Wno-system-headers -Wall -Wextra -Wsign-compare -pedantic -Wno-error * CXX : /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-g++ * CXXFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=2 -Wno-reserved-identifier -std=gnu++11 -Wno-system-headers -Wall -Wextra -Wno-error * CPP : /home/thomas/autobuild/instance-1/output-1/host/bin/powerpc64le-linux-cpp * CPPFLAGS : -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 * CONFIG_FLAGS : --target=powerpc64le-buildroot-linux-gnu --host=powerpc64le-buildroot-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix= --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared --with-altpidpath=/var/run/upsd --with-dev --without-doc --with-user=nut --with-group=nut --with-drivers=auto --without-avahi --with-freeipmi --with-cgi --with-libltdl --with-usb --without-neon --without-snmp --with-ssl >>> nut 2.8.1 Building PATH="/home/thomas/autobuild/instance-1/output-1/host/bin:/home/thomas/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j4 -C /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/ make[1]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' Making all in include make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' NUT_VERSION: "2.8.1" test -f "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" cmp -s "nut_version.h.tmp" "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" rm -f "nut_version.h.tmp" /usr/bin/make all-am make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' Making all in common make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' /usr/bin/make all-am make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CC parseconf.lo CC libcommon_la-state.lo CC libcommon_la-str.lo CC libcommon_la-upsconf.lo CC libcommon_la-common.lo CC libcommon_la-strnlen.lo CC libcommonclient_la-state.lo CC libcommonclient_la-str.lo CC libcommonclient_la-common.lo CC libcommonclient_la-strnlen.lo CCLD libparseconf.la CCLD libcommon.la CCLD libcommonclient.la make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' Making all in clients make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' CC upsc.o CC upslog.o CC upsclient.lo make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommonclient.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CC upsrw.o CC upscmd.o CC upsstats.o CC cgilib.o CC upsimage.o CC upsset.o CC upsmon.o make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CC upssched.o make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CXX nutclient.lo CXX nutclientmem.lo CCLD libupsclient.la CCLD upssched CCLD upsc CCLD upslog CCLD upsrw CCLD upscmd CCLD upsstats.cgi CCLD upsimage.cgi CCLD upsset.cgi CCLD upsmon CXXLD libnutclient.la libtool: warning: library '/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libstdc++.la' was moved. CXXLD libnutclientstub.la libtool: warning: '/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libstdc++.la' seems to be moved libtool: warning: library '/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libstdc++.la' was moved. make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' Making all in conf make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' Making all in data make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' Making all in html make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' Making all in docs make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' Making all in man make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' Making all in cables make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' Making all in drivers make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' CC dummy_ups-dummy-ups.o CC main.lo CC dstate.lo CC upsdrvquery.lo make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' CC clone.o CC serial.lo CC clone-outlet.o CC apcupsd_ups-apcupsd-ups.o CC skel.o CC al175.o CC bcmxcp.o CC bcmxcp_ser.o CC belkin.o CC belkinunv.o CC bestfcom.o CC bestfortress.o CC bestuferrups.o CC bestups.o CC etapro.o CC everups.o CC gamatronic.o CC genericups.o CC isbmex.o CC liebert.o CC liebert-esp2.o CC masterguard.o CC metasys.o CC mge-utalk.o CC microdowell.o CC microsol-apc.o CC microsol-common.o CC mge_shut-usbhid-ups.o CC mge_shut-libshut.o CC mge_shut-libhid.o CC mge_shut-hidparser.o CC mge_shut-mge-hid.o CC oneac.o CC optiups.o CC powercom.o CC rhino.o CC safenet.o CC nutdrv_siemens_sitop.o CC solis.o CC tripplite.o CC tripplitesu.o CC upscode2.o CC victronups.o CC powerpanel.o CC powerp-bin.o CC powerp-txt.o CC blazer.o CC blazer_ser.o CC ivtscd.o CC apcsmart.o CC apcsmart_tabs.o CC apcsmart-old.o CC riello.o CC riello_ser.o CC sms_ser.o CC nutdrv_qx-nutdrv_qx.o CC nutdrv_qx-libusb1.o CC nutdrv_qx-usb-common.o CC nutdrv_qx-nutdrv_qx_bestups.o CC nutdrv_qx-nutdrv_qx_blazer-common.o CC nutdrv_qx-nutdrv_qx_masterguard.o CC nutdrv_qx-nutdrv_qx_mecer.o CC nutdrv_qx-nutdrv_qx_megatec.o CC nutdrv_qx-nutdrv_qx_megatec-old.o CC nutdrv_qx-nutdrv_qx_mustek.o CC nutdrv_qx-nutdrv_qx_q1.o CC nutdrv_qx-nutdrv_qx_voltronic.o CC nutdrv_qx-nutdrv_qx_voltronic-qs.o CC nutdrv_qx-nutdrv_qx_voltronic-qs-hex.o CC nutdrv_qx-nutdrv_qx_zinto.o CC nutdrv_qx-nutdrv_qx_hunnox.o CC nutdrv_qx-nutdrv_qx_ablerex.o CC usbhid-ups.o CC libhid.o CC libusb1.o CC hidparser.o CC usb-common.o CC apc-hid.o CC arduino-hid.o CC belkin-hid.o CC cps-hid.o CC explore-hid.o CC liebert-hid.o CC mge-hid.o CC powercom-hid.o CC tripplite-hid.o CC idowell-hid.o CC openups-hid.o CC powervar-hid.o CC delta_ups-hid.o CC ever-hid.o CC legrand-hid.o CC salicru-hid.o CC bcmxcp_usb.o CC tripplite_usb.o CC blazer_usb.o CC richcomm_usb.o CC riello_usb.o CC nutdrv_atcl_usb.o CC nut-ipmipsu.o CC nut-libfreeipmi.o CC generic_gpio_common.o CC generic_gpio_libgpiod.o CC upsdrvctl.o CCLD libdummy.la CCLD libdummy_upsdrvquery.la CCLD libdummy_serial.la CCLD dummy-ups CCLD apcupsd-ups CCLD skel CCLD al175 CCLD bcmxcp CCLD belkin CCLD belkinunv CCLD bestfcom CCLD bestfortress CCLD bestuferrups CCLD bestups CCLD etapro CCLD everups CCLD gamatronic CCLD genericups CCLD isbmex CCLD liebert CCLD liebert-esp2 CCLD masterguard CCLD metasys CCLD mge-utalk CCLD microdowell CCLD microsol-apc CCLD mge-shut CCLD oneac CCLD optiups CCLD powercom CCLD rhino CCLD safenet CCLD nutdrv_siemens-sitop CCLD solis CCLD tripplite CCLD tripplitesu CCLD upscode2 CCLD victronups CCLD powerpanel CCLD blazer_ser CCLD ivtscd CCLD apcsmart CCLD apcsmart-old CCLD riello_ser CCLD sms_ser CCLD nutdrv_qx CCLD usbhid-ups CCLD bcmxcp_usb CCLD tripplite_usb CCLD blazer_usb CCLD richcomm_usb CCLD riello_usb CCLD nutdrv_atcl_usb CCLD nut-ipmipsu CCLD generic_gpio_libgpiod CCLD upsdrvctl CCLD clone CCLD clone-outlet make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' Making all in tools make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making all in . make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making all in nut-scanner make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' test -s "serial.c" || ln -s -f "../../drivers/serial.c" "serial.c" test -s "bcmxcp_ser.c" || ln -s -f "../../drivers/bcmxcp_ser.c" "bcmxcp_ser.c" make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Nothing to be done for 'nut-scanner-deps'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Nothing to be done for 'nut-scanner-deps'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' /usr/bin/make all-am make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' CC nut_scanner-nut-scanner.o CC libnutscan_la-scan_nut.lo CC libnutscan_la-scan_ipmi.lo CC libnutscan_la-nutscan-device.lo CC libnutscan_la-nutscan-ip.lo CC libnutscan_la-nutscan-display.lo CC libnutscan_la-nutscan-init.lo CC libnutscan_la-scan_usb.lo CC libnutscan_la-scan_snmp.lo CC libnutscan_la-scan_xml_http.lo CC libnutscan_la-scan_avahi.lo CC libnutscan_la-scan_eaton_serial.lo CC libnutscan_la-nutscan-serial.lo CC libnutscan_la-serial.lo CC libnutscan_la-bcmxcp_ser.lo make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[5]: 'libcommonclient.la' is up to date. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Nothing to be done for 'nut-scanner-deps'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Nothing to be done for 'nut-scanner-deps'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' CCLD libnutscan.la CCLD nut-scanner make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making all in lib make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' Making all in scripts make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' Making all in augeas make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' Making all in devd make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' Making all in hotplug make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' Making all in python make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' Making all in systemd make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' Making all in udev make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' cp nut-usbups.rules 62-nut-usbups.rules cp nut-ipmipsu.rules 52-nut-ipmipsu.rules make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' Making all in ufw make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' Making all in Solaris make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' Making all in Windows make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' Making all in upsdrvsvcctl make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' Making all in server make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' CC sockdebug.o CC upsd.o make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CC user.o CC conf.o CC netssl.o CC sstate.o CC desc.o CC netget.o CC netmisc.o CC netlist.o CC netuser.o CC netset.o CC netinstcmd.o CCLD sockdebug CCLD upsd make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' Making all in tests make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' test -s "hidparser.c" || ln -s -f "../drivers/hidparser.c" "hidparser.c" CC nutlogtest.o CC nuttimetest.o CC getvaluetest-getvaluetest.o make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' CC getvaluetest-hidparser.o CC gpiotest-generic_gpio_utest.o CC gpiotest-generic_gpio_liblocal.o test -s "generic_gpio_libgpiod.c" || ln -s -f "../drivers/generic_gpio_libgpiod.c" "generic_gpio_libgpiod.c" test -s "generic_gpio_common.c" || ln -s -f "../drivers/generic_gpio_common.c" "generic_gpio_common.c" make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' CC libdummy_mockdrv_la-main.lo CXX cppunittest-example.o CC libdummy_mockdrv_la-dstate.lo CXX cppunittest-nutclienttest.o CXX cppunittest-cpputest.o make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' CCLD libdummy_mockdrv.la make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' CCLD nutlogtest copying selected object files to avoid basename conflicts... CCLD nuttimetest make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' CCLD getvaluetest CC gpiotest-generic_gpio_libgpiod.o CC gpiotest-generic_gpio_common.o CCLD gpiotest CXXLD cppunittest libtool: warning: library '/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libstdc++.la' was moved. libtool: warning: library '/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libstdc++.la' was moved. /usr/bin/make all-recursive make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' Making all in . make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' Making all in NIT make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[1]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' >>> nut 2.8.1 Installing to staging directory PATH="/home/thomas/autobuild/instance-1/output-1/host/bin:/home/thomas/autobuild/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j4 DESTDIR=/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot install -C /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/ make[1]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' Making install in include make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' NUT_VERSION: "2.8.1" test -f "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" cmp -s "nut_version.h.tmp" "nut_version.h" || cp "nut_version.h.tmp" "nut_version.h" rm -f "nut_version.h.tmp" /usr/bin/make install-am make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' /usr/bin/install -c -m 644 parseconf.h '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/include' Making install in common make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' /usr/bin/make install-am make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' Making install in clients make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommonclient.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommon.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libparseconf.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' /usr/bin/install -c upssched-cmd '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libupsclient.la libnutclient.la libnutclientstub.la '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib' /usr/bin/install -c -m 644 upsclient.h nutclient.h nutclientmem.h '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' libtool: install: /usr/bin/install -c .libs/libupsclient.so.6.0.1 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libupsclient.so.6.0.1 libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libupsclient.so.6.0.1 libupsclient.so.6 || { rm -f libupsclient.so.6 && ln -s libupsclient.so.6.0.1 libupsclient.so.6; }; }) libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libupsclient.so.6.0.1 libupsclient.so || { rm -f libupsclient.so && ln -s libupsclient.so.6.0.1 libupsclient.so; }; }) libtool: install: /usr/bin/install -c .libs/libupsclient.lai /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libupsclient.la libtool: install: /usr/bin/install -c .libs/libnutclient.so.2.0.2 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutclient.so.2.0.2 libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutclient.so.2.0.2 libnutclient.so.2 || { rm -f libnutclient.so.2 && ln -s libnutclient.so.2.0.2 libnutclient.so.2; }; }) libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutclient.so.2.0.2 libnutclient.so || { rm -f libnutclient.so && ln -s libnutclient.so.2.0.2 libnutclient.so; }; }) libtool: install: /usr/bin/install -c .libs/libnutclient.lai /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutclient.la libtool: install: /usr/bin/install -c .libs/libnutclientstub.so.1.0.1 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutclientstub.so.1.0.1 libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutclientstub.so.1.0.1 libnutclientstub.so.1 || { rm -f libnutclientstub.so.1 && ln -s libnutclientstub.so.1.0.1 libnutclientstub.so.1; }; }) libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutclientstub.so.1.0.1 libnutclientstub.so || { rm -f libnutclientstub.so && ln -s libnutclientstub.so.1.0.1 libnutclientstub.so; }; }) libtool: install: /usr/bin/install -c .libs/libnutclientstub.lai /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutclientstub.la libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/cgi-bin' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c upsc upslog upsrw upscmd '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c upsmon upssched '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c upsstats.cgi upsimage.cgi upsset.cgi '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/cgi-bin' libtool: install: /usr/bin/install -c upsmon /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin/upsmon libtool: install: /usr/bin/install -c upsstats.cgi /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/cgi-bin/upsstats.cgi libtool: install: /usr/bin/install -c upsc /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/upsc libtool: install: /usr/bin/install -c upssched /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin/upssched libtool: install: /usr/bin/install -c upslog /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/upslog libtool: install: /usr/bin/install -c upsimage.cgi /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/cgi-bin/upsimage.cgi libtool: install: /usr/bin/install -c upsrw /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/upsrw libtool: install: /usr/bin/install -c upsset.cgi /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/cgi-bin/upsset.cgi libtool: install: /usr/bin/install -c upscmd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/upscmd make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' Making install in conf make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' make[3]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/etc' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/etc' /usr/bin/install -c -m 644 upsd.conf.sample upsd.users.sample nut.conf.sample ups.conf.sample hosts.conf.sample upsset.conf.sample upsstats.html.sample upsstats-single.html.sample '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/etc' /usr/bin/install -c -m 644 upssched.conf.sample upsmon.conf.sample '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/etc' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/conf' Making install in data make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' Making install in html make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/html' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/html' /usr/bin/install -c -m 644 index.html bottom.html nut-banner.png '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/html' /usr/bin/install -c -m 644 header.html '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/html' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data/html' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share' /usr/bin/install -c -m 644 driver.list '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share' /usr/bin/install -c -m 644 cmdvartab '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/data' Making install in docs make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' Making install in man make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/man' Making install in cables make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs/cables' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/docs' Making install in drivers make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommonclient.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' make[3]: Nothing to be done for 'install-data-am'. make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommon.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libparseconf.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[5]: 'libcommonclient.la' is up to date. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/clients' /bin/bash ../libtool --mode=install /usr/bin/install -c upsdrvctl '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c dummy-ups clone clone-outlet apcupsd-ups skel al175 bcmxcp belkin belkinunv bestfcom bestfortress bestuferrups bestups etapro everups gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys mge-utalk microdowell microsol-apc mge-shut oneac optiups powercom rhino safenet nutdrv_siemens-sitop solis tripplite tripplitesu upscode2 victronups powerpanel blazer_ser ivtscd apcsmart apcsmart-old riello_ser sms_ser nutdrv_qx usbhid-ups bcmxcp_usb tripplite_usb blazer_usb richcomm_usb riello_usb nutdrv_atcl_usb nut-ipmipsu generic_gpio_libgpiod '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' libtool: install: /usr/bin/install -c upsdrvctl /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin/upsdrvctl libtool: install: /usr/bin/install -c dummy-ups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/dummy-ups libtool: install: /usr/bin/install -c clone /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/clone libtool: install: /usr/bin/install -c clone-outlet /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/clone-outlet libtool: install: /usr/bin/install -c apcupsd-ups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/apcupsd-ups libtool: install: /usr/bin/install -c skel /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/skel libtool: install: /usr/bin/install -c al175 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/al175 libtool: install: /usr/bin/install -c bcmxcp /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bcmxcp libtool: install: /usr/bin/install -c belkin /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/belkin libtool: install: /usr/bin/install -c belkinunv /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/belkinunv libtool: install: /usr/bin/install -c bestfcom /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bestfcom libtool: install: /usr/bin/install -c bestfortress /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bestfortress libtool: install: /usr/bin/install -c bestuferrups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bestuferrups libtool: install: /usr/bin/install -c bestups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bestups libtool: install: /usr/bin/install -c etapro /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/etapro libtool: install: /usr/bin/install -c everups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/everups libtool: install: /usr/bin/install -c gamatronic /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/gamatronic libtool: install: /usr/bin/install -c genericups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/genericups libtool: install: /usr/bin/install -c isbmex /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/isbmex libtool: install: /usr/bin/install -c liebert /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/liebert libtool: install: /usr/bin/install -c liebert-esp2 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/liebert-esp2 libtool: install: /usr/bin/install -c masterguard /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/masterguard libtool: install: /usr/bin/install -c metasys /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/metasys libtool: install: /usr/bin/install -c mge-utalk /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/mge-utalk libtool: install: /usr/bin/install -c microdowell /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/microdowell libtool: install: /usr/bin/install -c microsol-apc /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/microsol-apc libtool: install: /usr/bin/install -c mge-shut /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/mge-shut libtool: install: /usr/bin/install -c oneac /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/oneac libtool: install: /usr/bin/install -c optiups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/optiups libtool: install: /usr/bin/install -c powercom /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/powercom libtool: install: /usr/bin/install -c rhino /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/rhino libtool: install: /usr/bin/install -c safenet /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/safenet libtool: install: /usr/bin/install -c nutdrv_siemens-sitop /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/nutdrv_siemens-sitop libtool: install: /usr/bin/install -c solis /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/solis libtool: install: /usr/bin/install -c tripplite /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/tripplite libtool: install: /usr/bin/install -c tripplitesu /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/tripplitesu libtool: install: /usr/bin/install -c upscode2 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/upscode2 libtool: install: /usr/bin/install -c victronups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/victronups libtool: install: /usr/bin/install -c powerpanel /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/powerpanel libtool: install: /usr/bin/install -c blazer_ser /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/blazer_ser libtool: install: /usr/bin/install -c ivtscd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/ivtscd libtool: install: /usr/bin/install -c apcsmart /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/apcsmart libtool: install: /usr/bin/install -c apcsmart-old /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/apcsmart-old libtool: install: /usr/bin/install -c riello_ser /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/riello_ser libtool: install: /usr/bin/install -c sms_ser /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/sms_ser libtool: install: /usr/bin/install -c nutdrv_qx /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/nutdrv_qx libtool: install: /usr/bin/install -c usbhid-ups /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/usbhid-ups libtool: install: /usr/bin/install -c bcmxcp_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/bcmxcp_usb libtool: install: /usr/bin/install -c tripplite_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/tripplite_usb libtool: install: /usr/bin/install -c blazer_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/blazer_usb libtool: install: /usr/bin/install -c richcomm_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/richcomm_usb libtool: install: /usr/bin/install -c riello_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/riello_usb libtool: install: /usr/bin/install -c nutdrv_atcl_usb /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/nutdrv_atcl_usb libtool: install: /usr/bin/install -c nut-ipmipsu /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/nut-ipmipsu libtool: install: /usr/bin/install -c generic_gpio_libgpiod /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/generic_gpio_libgpiod make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/drivers' Making install in tools make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making install in . make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making install in nut-scanner make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Nothing to be done for 'nut-scanner-deps'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[4]: Nothing to be done for 'nut-scanner-deps'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' /usr/bin/make install-am make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[5]: 'libcommonclient.la' is up to date. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Nothing to be done for 'nut-scanner-deps'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Nothing to be done for 'nut-scanner-deps'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' make[6]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[6]: 'libcommonclient.la' is up to date. make[6]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' /usr/bin/install -c -m 644 nut-scan.h nutscan-device.h nutscan-ip.h nutscan-init.h nutscan-serial.h '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/include' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libnutscan.la '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib' libtool: install: /usr/bin/install -c .libs/libnutscan.so.2.0.2 /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutscan.so.2.0.2 libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutscan.so.2.0.2 libnutscan.so.2 || { rm -f libnutscan.so.2 && ln -s libnutscan.so.2.0.2 libnutscan.so.2; }; }) libtool: install: (cd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib && { ln -s -f libnutscan.so.2.0.2 libnutscan.so || { rm -f libnutscan.so && ln -s libnutscan.so.2.0.2 libnutscan.so; }; }) libtool: install: /usr/bin/install -c .libs/libnutscan.lai /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/libnutscan.la libtool: warning: remember to run 'libtool --finish /usr/lib' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' /bin/bash ../../libtool --mode=install /usr/bin/install -c nut-scanner '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin' libtool: install: /usr/bin/install -c nut-scanner /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/bin/nut-scanner make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools/nut-scanner' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tools' Making install in lib make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/pkgconfig' /usr/bin/install -c -m 644 libupsclient.pc libnutscan.pc libnutclient.pc libnutclientstub.pc '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib/pkgconfig' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/lib' Making install in scripts make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' Making install in augeas make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share/augeas/lenses/dist' /usr/bin/install -c -m 644 nuthostsconf.aug nutupsconf.aug nutupsdusers.aug nutupsschedconf.aug nutnutconf.aug nutupsdconf.aug nutupsmonconf.aug nutupssetconf.aug '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/share/augeas/lenses/dist' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/augeas' Making install in devd make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/devd' Making install in hotplug make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/hotplug' Making install in python make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/local/lib/python2.7/dist-packages' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/local/lib/python2.7/dist-packages' /usr/bin/install -c -m 644 module/PyNUT.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/local/lib/python2.7/dist-packages' /usr/bin/install -c module/test_nutclient.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/local/lib/python2.7/dist-packages' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/install -c module/test_nutclient.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/install -c -m 644 module/PyNUT.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/install -c -m 644 module/PyNUT.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' /usr/bin/install -c module/test_nutclient.py '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/home/thomas/autobuild/instance-1/output-1/host/lib/python3.11/site-packages' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/python' Making install in systemd make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/systemd' Making install in udev make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/lib/udev/rules.d' /usr/bin/install -c -m 644 62-nut-usbups.rules 52-nut-ipmipsu.rules '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/lib/udev/rules.d' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/udev' Making install in ufw make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/ufw' Making install in Solaris make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Solaris' Making install in Windows make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/Windows' Making install in upsdrvsvcctl make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts/upsdrvsvcctl' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/scripts' Making install in server make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libparseconf.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: 'libcommon.la' is up to date. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' make[3]: Nothing to be done for 'install-data-am'. make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libcommon.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' make[4]: 'libparseconf.la' is up to date. make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/common' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' /usr/bin/mkdir -p '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/libexec' /bin/bash ../libtool --mode=install /usr/bin/install -c upsd '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c sockdebug '/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/libexec' libtool: install: /usr/bin/install -c sockdebug /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/libexec/sockdebug libtool: install: /usr/bin/install -c upsd /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/sbin/upsd make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/server' Making install in tests make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' /usr/bin/make install-recursive make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' Making install in . make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' Making install in NIT make[4]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[5]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[4]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests/NIT' make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/tests' make[2]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[3]: Entering directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[2]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' make[1]: Leaving directory '/home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1' >>> nut 2.8.1 Fixing libtool files for la in $(find /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /usr/bin/sed -i -e "s:/home/thomas/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot:@STAGING_DIR@:g" \ -e "s:/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/thomas/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot:g" \ -e "s:@BASE_DIR@:/home/thomas/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done nut: installs files in /home/thomas/autobuild/instance-1/output-1/host/powerpc64le-buildroot-linux-gnu/sysroot//home/thomas/autobuild/instance-1/output-1 make: *** [package/pkg-generic.mk:327: /home/thomas/autobuild/instance-1/output-1/build/nut-2.8.1/.stamp_staging_installed] Error 1 make: Leaving directory '/home/thomas/autobuild/instance-1/buildroot'