>>> gnuplot 5.4.9 Downloading wget --passive-ftp -nd -t 3 -O '/home/autobuild/autobuild/instance-8/output-1/build/.gnuplot-5.4.9.tar.gz.WRqBSK/output' 'http://downloads.sourceforge.net/project/gnuplot/gnuplot/5.4.9/gnuplot-5.4.9.tar.gz' URL transformed to HTTPS due to an HSTS policy --2023-09-30 11:36:36-- https://downloads.sourceforge.net/project/gnuplot/gnuplot/5.4.9/gnuplot-5.4.9.tar.gz Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 204.68.111.105 Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|204.68.111.105|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://versaweb.dl.sourceforge.net/project/gnuplot/gnuplot/5.4.9/gnuplot-5.4.9.tar.gz [following] --2023-09-30 11:36:37-- https://versaweb.dl.sourceforge.net/project/gnuplot/gnuplot/5.4.9/gnuplot-5.4.9.tar.gz Resolving versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)... 162.251.232.173 Connecting to versaweb.dl.sourceforge.net (versaweb.dl.sourceforge.net)|162.251.232.173|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5686930 (5.4M) [application/x-gzip] Saving to: '/home/autobuild/autobuild/instance-8/output-1/build/.gnuplot-5.4.9.tar.gz.WRqBSK/output' 0K .......... .......... .......... .......... .......... 0% 1.48M 4s 50K .......... .......... .......... .......... .......... 1% 1.40M 4s 100K .......... .......... .......... .......... .......... 2% 185M 2s 150K .......... .......... .......... .......... .......... 3% 1.69M 3s 200K .......... .......... .......... .......... .......... 4% 12.1M 2s 250K .......... .......... .......... .......... .......... 5% 144M 2s 300K .......... .......... .......... .......... .......... 6% 10.7M 2s 350K .......... .......... .......... .......... .......... 7% 173M 1s 400K .......... .......... .......... .......... .......... 8% 2.14M 1s 450K .......... .......... .......... .......... .......... 9% 6.15M 1s 500K .......... .......... .......... .......... .......... 9% 229M 1s 550K .......... .......... .......... .......... .......... 10% 241M 1s 600K .......... .......... .......... .......... .......... 11% 242M 1s 650K .......... .......... .......... .......... .......... 12% 221M 1s 700K .......... .......... .......... .......... .......... 13% 224M 1s 750K .......... .......... .......... .......... .......... 14% 188M 1s 800K .......... .......... .......... .......... .......... 15% 5.69M 1s 850K .......... .......... .......... .......... .......... 16% 3.03M 1s 900K .......... .......... .......... .......... .......... 17% 26.3M 1s 950K .......... .......... .......... .......... .......... 18% 216M 1s 1000K .......... .......... .......... .......... .......... 18% 6.17M 1s 1050K .......... .......... .......... .......... .......... 19% 198M 1s 1100K .......... .......... .......... .......... .......... 20% 121M 1s 1150K .......... .......... .......... .......... .......... 21% 7.65M 1s 1200K .......... .......... .......... .......... .......... 22% 136M 1s 1250K .......... .......... .......... .......... .......... 23% 120M 1s 1300K .......... .......... .......... .......... .......... 24% 153M 1s 1350K .......... .......... .......... .......... .......... 25% 230M 1s 1400K .......... .......... .......... .......... .......... 26% 238M 1s 1450K .......... .......... .......... .......... .......... 27% 187M 0s 1500K .......... .......... .......... .......... .......... 27% 120M 0s 1550K .......... .......... .......... .......... .......... 28% 138M 0s 1600K .......... .......... .......... .......... .......... 29% 179M 0s 1650K .......... .......... .......... .......... .......... 30% 221M 0s 1700K .......... .......... .......... .......... .......... 31% 5.32M 0s 1750K .......... .......... .......... .......... .......... 32% 139M 0s 1800K .......... .......... .......... .......... .......... 33% 11.0M 0s 1850K .......... .......... .......... .......... .......... 34% 151M 0s 1900K .......... .......... .......... .......... .......... 35% 245M 0s 1950K .......... .......... .......... .......... .......... 36% 183M 0s 2000K .......... .......... .......... .......... .......... 36% 5.88M 0s 2050K .......... .......... .......... .......... .......... 37% 133M 0s 2100K .......... .......... .......... .......... .......... 38% 142M 0s 2150K .......... .......... .......... .......... .......... 39% 135M 0s 2200K .......... .......... .......... .......... .......... 40% 143M 0s 2250K .......... .......... .......... .......... .......... 41% 178M 0s 2300K .......... .......... .......... .......... .......... 42% 186M 0s 2350K .......... .......... .......... .......... .......... 43% 109M 0s 2400K .......... .......... .......... .......... .......... 44% 163M 0s 2450K .......... .......... .......... .......... .......... 45% 11.2M 0s 2500K .......... .......... .......... .......... .......... 45% 133M 0s 2550K .......... .......... .......... .......... .......... 46% 184M 0s 2600K .......... .......... .......... .......... .......... 47% 107M 0s 2650K .......... .......... .......... .......... .......... 48% 169M 0s 2700K .......... .......... .......... .......... .......... 49% 230M 0s 2750K .......... .......... .......... .......... .......... 50% 109M 0s 2800K .......... .......... .......... .......... .......... 51% 264K 0s 2850K .......... .......... .......... .......... .......... 52% 113M 0s 2900K .......... .......... .......... .......... .......... 53% 227M 0s 2950K .......... .......... .......... .......... .......... 54% 237M 0s 3000K .......... .......... .......... .......... .......... 54% 233M 0s 3050K .......... .......... .......... .......... .......... 55% 234M 0s 3100K .......... .......... .......... .......... .......... 56% 244M 0s 3150K .......... .......... .......... .......... .......... 57% 182M 0s 3200K .......... .......... .......... .......... .......... 58% 219M 0s 3250K .......... .......... .......... .......... .......... 59% 246M 0s 3300K .......... .......... .......... .......... .......... 60% 1.61M 0s 3350K .......... .......... .......... .......... .......... 61% 972K 0s 3400K .......... .......... .......... .......... .......... 62% 17.2M 0s 3450K .......... .......... .......... .......... .......... 63% 122M 0s 3500K .......... .......... .......... .......... .......... 63% 161M 0s 3550K .......... .......... .......... .......... .......... 64% 108M 0s 3600K .......... .......... .......... .......... .......... 65% 17.5M 0s 3650K .......... .......... .......... .......... .......... 66% 215M 0s 3700K .......... .......... .......... .......... .......... 67% 226M 0s 3750K .......... .......... .......... .......... .......... 68% 12.2M 0s 3800K .......... .......... .......... .......... .......... 69% 208M 0s 3850K .......... .......... .......... .......... .......... 70% 551K 0s 3900K .......... .......... .......... .......... .......... 71% 139M 0s 3950K .......... .......... .......... .......... .......... 72% 123M 0s 4000K .......... .......... .......... .......... .......... 72% 140M 0s 4050K .......... .......... .......... .......... .......... 73% 139M 0s 4100K .......... .......... .......... .......... .......... 74% 11.0M 0s 4150K .......... .......... .......... .......... .......... 75% 177M 0s 4200K .......... .......... .......... .......... .......... 76% 231M 0s 4250K .......... .......... .......... .......... .......... 77% 234M 0s 4300K .......... .......... .......... .......... .......... 78% 244M 0s 4350K .......... .......... .......... .......... .......... 79% 552K 0s 4400K .......... .......... .......... .......... .......... 80% 171M 0s 4450K .......... .......... .......... .......... .......... 81% 19.6M 0s 4500K .......... .......... .......... .......... .......... 81% 238M 0s 4550K .......... .......... .......... .......... .......... 82% 13.5M 0s 4600K .......... .......... .......... .......... .......... 83% 196M 0s 4650K .......... .......... .......... .......... .......... 84% 227M 0s 4700K .......... .......... .......... .......... .......... 85% 150M 0s 4750K .......... .......... .......... .......... .......... 86% 128M 0s 4800K .......... .......... .......... .......... .......... 87% 235M 0s 4850K .......... .......... .......... .......... .......... 88% 539K 0s 4900K .......... .......... .......... .......... .......... 89% 101M 0s 4950K .......... .......... .......... .......... .......... 90% 10.7M 0s 5000K .......... .......... .......... .......... .......... 90% 219M 0s 5050K .......... .......... .......... .......... .......... 91% 235M 0s 5100K .......... .......... .......... .......... .......... 92% 233M 0s 5150K .......... .......... .......... .......... .......... 93% 11.2M 0s 5200K .......... .......... .......... .......... .......... 94% 146M 0s 5250K .......... .......... .......... .......... .......... 95% 203M 0s 5300K .......... .......... .......... .......... .......... 96% 222M 0s 5350K .......... .......... .......... .......... .......... 97% 2.21M 0s 5400K .......... .......... .......... .......... .......... 98% 715K 0s 5450K .......... .......... .......... .......... .......... 99% 179M 0s 5500K .......... .......... .......... .......... .......... 99% 235M 0s 5550K ... 100% 70.4M=0.9s 2023-09-30 11:36:38 (6.08 MB/s) - '/home/autobuild/autobuild/instance-8/output-1/build/.gnuplot-5.4.9.tar.gz.WRqBSK/output' saved [5686930/5686930] gnuplot-5.4.9.tar.gz: OK (md5: 345533e461e41c263b3293f46651f0b2) gnuplot-5.4.9.tar.gz: OK (sha1: 1a3953660656a38178ae2b368efa895af55a5001) gnuplot-5.4.9.tar.gz: OK (sha256: a328a021f53dc05459be6066020e9a71e8eab6255d3381e22696120d465c6a97) >>> gnuplot 5.4.9 Extracting gzip -d -c /home/autobuild/autobuild/instance-8/dl/gnuplot/gnuplot-5.4.9.tar.gz | tar --strip-components=1 -C /home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9 -xf - >>> gnuplot 5.4.9 Patching Applying 0001-configure-add-without-demo-option.patch using patch: patching file configure.ac Hunk #1 succeeded at 714 (offset 1 line). Hunk #2 succeeded at 1126 (offset 20 lines). patching file Makefile.am >>> gnuplot 5.4.9 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9 -name $file); do cp support/gnuconfig/$file $i; done; done >>> gnuplot 5.4.9 Configuring >>> gnuplot 5.4.9 Autoreconfiguring >>> gnuplot 5.4.9 Patching libtool (cd /home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/ && rm -rf config.cache && PATH="/home/autobuild/autobuild/instance-8/output-1/host/bin:/home/autobuild/autobuild/instance-8/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" AR="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc-ar" AS="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-as" LD="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-ld" NM="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc-nm" CC="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc" GCC="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc" CPP="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-cpp" CXX="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-g++" FC="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gfortran" F77="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gfortran" RANLIB="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc-ranlib" READELF="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-readelf" STRIP="/bin/true" OBJCOPY="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-objcopy" OBJDUMP="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/home/autobuild/autobuild/instance-8/output-1/host/bin/ccache /usr/bin/gcc" GCC_FOR_BUILD="/home/autobuild/autobuild/instance-8/output-1/host/bin/ccache /usr/bin/gcc" CXX_FOR_BUILD="/home/autobuild/autobuild/instance-8/output-1/host/bin/ccache /usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/autobuild/autobuild/instance-8/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-8/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/autobuild/autobuild/instance-8/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/autobuild/autobuild/instance-8/output-1/host/lib -Wl,-rpath,/home/autobuild/autobuild/instance-8/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-as" DEFAULT_LINKER="/home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1" LDFLAGS="" FCFLAGS=" -Ofast -g0" FFLAGS=" -Ofast -g0" PKG_CONFIG="/home/autobuild/autobuild/instance-8/output-1/host/bin/pkg-config" STAGING_DIR="/home/autobuild/autobuild/instance-8/output-1/host/arm-buildroot-linux-gnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-linux-gnueabi --host=arm-buildroot-linux-gnueabi --build=aarch64-unknown-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --enable-nls --disable-static --enable-shared --without-x --disable-raise-console --disable-mouse --without-tutorial --disable-demo --without-row-help --disable-history-file --disable-wxwidgets --without-lua --without-latex --without-cairo --without-qt --without-gd --with-readline=gnu ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-buildroot-linux-gnueabi-strip... /bin/true checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports the include directive... yes (GNU style) checking for arm-buildroot-linux-gnueabi-gcc... /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc accepts -g... yes checking for /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc option to enable C11 features... none needed checking whether /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc understands -c and -o together... yes checking dependency style of /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc... none checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for sys/select.h... yes checking for sys/socket.h... yes checking for vfork.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for arm-buildroot-linux-gnueabi-gcc... (cached) /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc checking whether the compiler supports GNU C... (cached) yes checking whether /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc accepts -g... (cached) yes checking for /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc option to enable C11 features... (cached) none needed checking whether /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc understands -c and -o together... (cached) yes checking dependency style of /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc... (cached) none checking how to run the C preprocessor... /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-cpp checking for arm-buildroot-linux-gnueabi-gcc... arm-buildroot-linux-gnueabi-gcc checking whether the compiler supports GNU Objective C... no checking whether arm-buildroot-linux-gnueabi-gcc accepts -g... no checking dependency style of arm-buildroot-linux-gnueabi-gcc... none checking for an ANSI C-conforming const... yes checking for inline... inline checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for preprocessor stringizing operator... yes checking whether ln -s works... yes checking for off_t... yes checking for _LARGEFILE_SOURCE value needed for large files... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for struct tm.tm_gmtoff... yes checking for struct tm.__tm_gmtoff... no checking pkg-config is at least version 0.9.0... yes checking for LIBCERF... configure: WARNING: Package requirements (libcerf) were not met: Package 'libcerf', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBCERF_CFLAGS and LIBCERF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. checking for library containing cdawson... no checking for emacs... no checking for xemacs... no checking for dvips... dvips checking for troff... troff checking for latex2html... no checking for kpsewhich... kpsewhich checking for texhash... texhash checking for X... disabled checking for MS-DOS/djgpp/libGRX... no checking for Mac OS X... no checking for BeOS... no checking for Alpha/AXP CPU... no checking for sin... no checking for sin in -lm... yes checking for dirent.h... yes checking for errno.h... yes checking for float.h... yes checking for langinfo.h... yes checking for limits.h... yes checking for locale.h... yes checking for math.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for time.h... yes checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/bsdtypes.h... no checking for sys/ioctl.h... yes checking for sys/param.h... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/stat.h... (cached) yes checking for sys/systeminfo.h... no checking for sys/timeb.h... yes checking for sys/utsname.h... yes checking for libc.h... no checking for malloc.h... yes checking for poll.h... yes checking for sgtty.h... yes checking for termios.h... yes checking for values.h... yes checking for dirent.h... (cached) yes checking for inttypes.h... (cached) yes checking for dlfcn.h... yes checking for dl.h... no checking for _Bool... yes checking for stdbool.h that conforms to C99... yes checking whether stat file-mode macros are broken... no checking for sys/wait.h that is POSIX.1 compatible... yes checking for library containing dlopen... none required checking for unistd.h... yes checking if errno variable is declared... yes checking for size_t... yes checking for time_t in time.h... yes checking for atexit... yes checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for on_exit... yes checking for bcopy... yes checking for bzero... yes checking for setvbuf... yes checking for strerror... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for index... yes checking for rindex... yes checking for erf... yes checking for erfc... yes checking for gamma... yes checking for lgamma... yes checking for tgamma... yes checking for jn... yes checking for getcwd... yes checking for poll... yes checking for pclose... yes checking for popen... yes checking for fdopen... yes checking for select... yes checking for sleep... yes checking for stpcpy... yes checking for strcspn... yes checking for strdup... yes checking for strndup... yes checking for strnlen... yes checking for strcasecmp... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for sysinfo... yes checking for tcgetattr... yes checking for vfprintf... yes checking for doprnt... no checking for uname... yes checking for usleep... yes checking for /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed checking whether signgam is declared... yes checking for sigsetjmp... yes checking if malloc(0) returns 0... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for tputs in -lncurses... yes checking for remove_history in -lreadline... yes checking for library containing rl_ding... -lreadline checking for library containing rl_forced_update_display... none required checking for library containing rl_reset_after_signal... none required checking for library containing _rl_signal_handler... none required checking for library containing rl_pending_signal... none required checking for library containing rl_complete_with_tilde_expansion... none required checking for readline/readline.h... yes checking for readline/history.h... yes checking for deflate in -lz... yes checking for zlib.h... yes checking for library containing iconv_open... none required checking for iconv.h... yes checking for multi-byte support in x11... checking for XmbDrawString in -lX11... yes checking whether the compiler supports GNU C++... no checking whether no accepts -g... no checking for no option to enable C++11 features... none needed checking dependency style of no... none checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config/Makefile config.status: creating demo/Makefile config.status: creating demo/plugin/Makefile config.status: creating docs/Makefile config.status: creating m4/Makefile config.status: creating man/Makefile config.status: creating share/Makefile config.status: creating share/LaTeX/Makefile config.status: creating src/Makefile config.status: creating src/beos/Makefile config.status: creating src/wxterminal/Makefile config.status: creating src/qtterminal/Makefile config.status: creating term/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default commands ** Configuration summary for gnuplot 5.4.9: gnuplot will be compiled with the following terminals: Standalone terminals: yes (included by default) canvas, cgm, context, dumb, dxf, emf, epslatex, fig, hpgl, metafont, metapost, pcl5, postscript, pict2e, pslatex, pstex, pstricks, svg, texdraw, tkcanvas dot-matrix terminals: no (use --with-bitmap-terminals to enable) epson, nec, okidata, tandy, and seiko dp414 printers hp500c, hpdj, hpljii, hppj, pbm, sixel, starc tektronix terminal emulators: yes ( --without-tektronix to disable) tek410x tek40 vttek xterm kc_tek40 km_tek40 selanar sixeltek bitgraph note: not needed for sixel graphics output to vt100-series emulators Platform-specific, legacy, or specialized terminals omitted by default: ggi terminal: no (use --with-ggi to enable, requires libggi) gpic terminal: no (use --with-gpic to enable) tgif terminal: no (use --with-tgif to enable) mif terminal (FrameMaker 3): no (use --with-mif to enable) ReGIS terminal: no (use --with-regis to enable) caca terminal: no (use --with-caca to enable) aqua terminal (OSX): no Other terminals that can be enabled but have no ./configure option: eepic, emtex, hp2623a, hp2648, imagen, kyocera, latex, qms, tpic pm (makefile.os2), be (BeOS), svga (MSDOS/djgpp), windows X Window System terminal: no (requires X libraries) libgd-based png, jpeg, and gif terminals: no (requires libgd, see config.log) cairo-based terminals: no (requires cairo>=1.2, pango>=1.22, glib>=2.28) lua/TikZ terminal: no wxt terminal: no (requires C++, wxWidgets>2.6, cairo>0.9, pango>1.22) Qt : no (use --with-qt or --with-qt=qt4 or --with-qt=qt5 to enable gnuplot will be compiled with the following configurable features: Mouse support in interactive terminals: no Typing in plot window raises console: no Readline library: GNU readline library with -lncurses Command-line history file: no Check current directory for .gnuplot file: no (use --with-cwdrc to enable) Sort help/subtopic tables by column: yes cerf() and other special functions: no (libcerf not found) plugin support for loading external functions: yes Statistical summary of data ("stats" command): yes gnuplot will install the following additional materials: TeX files will not be installed PostScript prologue files: ${datarootdir}/gnuplot/5.4/PostScript/ Help file: ${datarootdir}/gnuplot/5.4/gnuplot.gih >>> gnuplot 5.4.9 Building PATH="/home/autobuild/autobuild/instance-8/output-1/host/bin:/home/autobuild/autobuild/instance-8/output-1/host/sbin:/home/autobuild/make:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" /home/autobuild/make/make -j1 -C /home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/ make[1]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9' /home/autobuild/make/make all-recursive make[2]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9' Making all in config make[3]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/config' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/config' Making all in m4 make[3]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/m4' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/m4' Making all in term make[3]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/term' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/term' Making all in src make[3]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' /home/autobuild/make/make all-recursive make[4]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' Making all in wxterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src/wxterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src/wxterminal' Making all in qtterminal make[5]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src/qtterminal' make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src/qtterminal' make[5]: Entering directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o alloc.o alloc.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o axis.o axis.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o breaders.o breaders.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o boundary.o boundary.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o color.o color.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o command.o command.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o contour.o contour.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o datablock.o datablock.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o datafile.o datafile.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o dynarray.o dynarray.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o encoding.o encoding.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o eval.o eval.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o external.o external.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o fit.o fit.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o gadgets.o gadgets.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o getcolor.o getcolor.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o graph3d.o graph3d.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o graphics.o graphics.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o help.o help.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o hidden3d.o hidden3d.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o history.o history.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o internal.o internal.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o interpol.o interpol.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o jitter.o jitter.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o libcerf.o libcerf.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o matrix.o matrix.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o misc.o misc.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o mouse.o mouse.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o multiplot.o multiplot.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o parse.o parse.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o plot.o plot.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o plot2d.o plot2d.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o plot3d.o plot3d.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o pm3d.o pm3d.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o readline.o readline.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o save.o save.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o scanner.o scanner.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o set.o set.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o show.o show.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o specfun.o specfun.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o standard.o standard.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o stats.o stats.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o stdfn.o stdfn.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o tables.o tables.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o tabulate.o tabulate.c /home/autobuild/autobuild/instance-8/output-1/host/bin/arm-buildroot-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I.. -I../term -I../term -DBINDIR=\"/usr/bin\" -DX11_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DQT_DRIVER_DIR=\"/usr/libexec/gnuplot/5.4\" -DGNUPLOT_SHARE_DIR=\"/usr/share/gnuplot/5.4\" -DGNUPLOT_PS_DIR=\"/usr/share/gnuplot/5.4/PostScript\" -DGNUPLOT_JS_DIR=\"/usr/share/gnuplot/5.4/js\" -DGNUPLOT_LUA_DIR=\"/usr/share/gnuplot/5.4/lua\" -DCONTACT=\"gnuplot-bugs@lists.sourceforge.net\" -DHELPFILE=\"/usr/share/gnuplot/5.4/gnuplot.gih\" -DGNUPLOT_X11=\"`echo gnuplot_x11 | sed 's&^&&'`\" -DXAPPLRESDIR=\"@X11_APPDEFAULTS_DIR@\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Ofast -g0 -D_FORTIFY_SOURCE=1 -c -o term.o term.c In file included from term.h:298, from term.c:1211: ../term/post.trm:4016:11: error: expected declaration specifiers or '...' before string constant 4016 | fputs("%%%%BeginImage\n", gppsfile); | ^~~~~~~~~~~~~~~~~~ ../term/post.trm:4016:31: error: expected declaration specifiers or '...' before 'gppsfile' 4016 | fputs("%%%%BeginImage\n", gppsfile); | ^~~~~~~~ ../term/post.trm:4019:22: error: expected ')' before string constant 4019 | fprintf(gppsfile,"gsave %d %d N %d %d L %d %d L %d %d L Z clip\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | ) ../term/post.trm:4027:5: error: expected identifier or '(' before 'if' 4027 | if (five_operand_image) { | ^~ ../term/post.trm:4045:5: error: expected identifier or '(' before 'else' 4045 | else { | ^~~~ ../term/post.trm:4102:5: error: expected identifier or '(' before '{' token 4102 | { | ^ ../term/post.trm:4108:5: error: expected identifier or '(' before 'if' 4108 | if (ps_params->level1) | ^~ ../term/post.trm:4110:5: error: expected identifier or '(' before 'else' 4110 | else { | ^~~~ ../term/post.trm:4116:11: error: expected declaration specifiers or '...' before string constant 4116 | fputs("grestore\n", gppsfile); | ^~~~~~~~~~~~ ../term/post.trm:4116:25: error: expected declaration specifiers or '...' before 'gppsfile' 4116 | fputs("grestore\n", gppsfile); | ^~~~~~~~ ../term/post.trm:4117:11: error: expected declaration specifiers or '...' before string constant 4117 | fputs("%%%%EndImage\n", gppsfile); | ^~~~~~~~~~~~~~~~ ../term/post.trm:4117:29: error: expected declaration specifiers or '...' before 'gppsfile' 4117 | fputs("%%%%EndImage\n", gppsfile); | ^~~~~~~~ ../term/post.trm:4118:5: warning: data definition has no type or storage class 4118 | free(encoded_image); | ^~~~ ../term/post.trm:4118:5: warning: type defaults to 'int' in declaration of 'free' [-Wimplicit-int] ../term/post.trm:4118:5: warning: parameter names (without types) in function declaration ../term/post.trm:4118:5: error: conflicting types for 'free'; have 'int()' In file included from stdfn.h:107, from term_api.h:39, from term.c:73: /home/autobuild/autobuild/instance-8/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/stdlib.h:687:13: note: previous declaration of 'free' with type 'void(void *)' 687 | extern void free (void *__ptr) __THROW; | ^~~~ ../term/post.trm:4120:5: error: expected identifier or '(' before 'return' 4120 | return; | ^~~~~~ ../term/post.trm:4121:1: error: expected identifier or '(' before '}' token 4121 | } | ^ make[5]: *** [Makefile:983: term.o] Error 1 make[5]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' make[4]: *** [Makefile:1037: all-recursive] Error 1 make[4]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' make[3]: *** [Makefile:702: all] Error 2 make[3]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/src' make[2]: *** [Makefile:431: all-recursive] Error 1 make[2]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9' make[1]: *** [Makefile:370: all] Error 2 make[1]: Leaving directory '/home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9' make: *** [package/pkg-generic.mk:293: /home/autobuild/autobuild/instance-8/output-1/build/gnuplot-5.4.9/.stamp_built] Error 2 make: Leaving directory '/home/autobuild/autobuild/instance-8/buildroot'