/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DCONF_DIR='"/var/lib/reaver"' -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wno-unused-but-set-variable -Wno-unused-variable -Wno-unused-function -Wno-pointer-sign -Ilibwps -I. -Ilwe -DCONFIG_IPV6 -c -o main.o main.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DCONF_DIR='"/var/lib/reaver"' -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wno-unused-but-set-variable -Wno-unused-variable -Wno-unused-function -Wno-pointer-sign -Ilibwps -I. -Ilwe -DCONFIG_IPV6 -c -o version.o version.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DCONF_DIR='"/var/lib/reaver"' -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wno-unused-but-set-variable -Wno-unused-variable -Wno-unused-function -Wno-pointer-sign -Ilibwps -I. -Ilwe -DCONFIG_IPV6 -Ilibwps -I. -Ilwe argsparser.o globule.o init.o sigint.o iface.o sigalrm.o misc.o cracker.o session.o send.o pins.o 80211.o exchange.o builder.o keys.o crc.o pixie.o wpscrack.o wpsmon.o main.o version.o libwps/libwps.o wps/wps_attr_build.o wps/wps_attr_parse.o wps/wps_attr_process.o wps/wps.o wps/wps_common.o wps/wps_dev_attr.o wps/wps_enrollee.o wps/wps_registrar.o wps/wps_ufd.o utils/base64.o utils/common.o utils/ip_addr.o utils/radiotap.o utils/trace.o utils/uuid.o utils/wpa_debug.o utils/wpabuf.o utils/os_unix.o utils/vendor.o utils/eloop.o tls/asn1.o tls/bignum.o tls/pkcs1.o tls/pkcs5.o tls/pkcs8.o tls/rsa.o tls/tlsv1_client.o tls/tlsv1_client_read.o tls/tlsv1_client_write.o tls/tlsv1_common.o tls/tlsv1_cred.o tls/tlsv1_record.o tls/tlsv1_server.o tls/tlsv1_server_read.o tls/tlsv1_server_write.o tls/x509v3.o crypto/aes-cbc.o crypto/aes-ctr.o crypto/aes-eax.o crypto/aes-encblock.o crypto/aes-internal.o crypto/aes-internal-dec.o crypto/aes-internal-enc.o crypto/aes-omac1.o crypto/aes-unwrap.o crypto/aes-wrap.o crypto/des-internal.o crypto/dh_group5.o crypto/dh_groups.o crypto/md4-internal.o crypto/md5.o crypto/md5-internal.o crypto/milenage.o crypto/ms_funcs.o crypto/rc4.o crypto/sha1.o crypto/sha1-internal.o crypto/sha1-pbkdf2.o crypto/sha1-tlsprf.o crypto/sha1-tprf.o crypto/sha256.o crypto/sha256-internal.o crypto/crypto_internal.o crypto/crypto_internal-cipher.o crypto/crypto_internal-modexp.o crypto/crypto_internal-rsa.o crypto/tls_internal.o crypto/fips_prf_internal.o lwe/iwlib.o -lm -lpcap -o reaver ln -sf ./reaver wash make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/reaver-1.6.5/src' >>> reaver 1.6.5 Installing to target PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/peko/autobuild/instance-1/output-1/target install -C /home/peko/autobuild/instance-1/output-1/build/reaver-1.6.5/src make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/reaver-1.6.5/src' ./install.sh -D -m 755 wash /home/peko/autobuild/instance-1/output-1/target/usr/bin/wash ./install.sh -D -m 755 reaver /home/peko/autobuild/instance-1/output-1/target/usr/bin/reaver mkdir -p /home/peko/autobuild/instance-1/output-1/target/var/lib/reaver make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/reaver-1.6.5/src' scrypt-1.3.0.tgz: OK (sha256: 263034edd4d1e117d4051d9a9260c74dedb0efaf4491c5152b738978b3f32748) >>> scrypt 1.3.0 Extracting gzip -d -c /home/peko/autobuild/instance-1/dl/scrypt/scrypt-1.3.0.tgz | /home/peko/autobuild/instance-1/output-1/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0 -xf - >>> scrypt 1.3.0 Patching >>> scrypt 1.3.0 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0 -name $file); do cp support/gnuconfig/$file $i; done; done >>> scrypt 1.3.0 Patching libtool patching file /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0/config.aux/ltmain.sh Hunk #1 succeeded at 2694 (offset 7 lines). Hunk #2 succeeded at 4284 (offset 7 lines). Hunk #3 succeeded at 6579 (offset 25 lines). Hunk #4 succeeded at 6589 (offset 25 lines). Hunk #5 succeeded at 6882 (offset 25 lines). Hunk #6 succeeded at 7174 (offset 25 lines). Hunk #7 succeeded at 8140 (offset 28 lines). Hunk #8 succeeded at 10769 (offset 59 lines). >>> scrypt 1.3.0 Configuring (cd /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0/ && rm -rf config.cache && PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" AR="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar" AS="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-as" LD="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld" NM="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-nm" CC="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc" GCC="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc" CPP="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-cpp" CXX="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-g++" FC="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gfortran" F77="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gfortran" RANLIB="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib" READELF="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-readelf" STRIP="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-strip" OBJCOPY="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-objcopy" OBJDUMP="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/home/peko/autobuild/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/home/peko/autobuild/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/home/peko/autobuild/instance-1/output-1/host/lib -Wl,-rpath,/home/peko/autobuild/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-as" DEFAULT_LINKER="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os " LDFLAGS="" FCFLAGS=" -Os " FFLAGS=" -Os " PKG_CONFIG="/home/peko/autobuild/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=mips64el-buildroot-linux-uclibc --host=mips64el-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for mips64el-buildroot-linux-uclibc-strip... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports the include directive... yes (GNU style) checking for mips64el-buildroot-linux-uclibc-gcc... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc accepts -g... yes checking for /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc option to accept ISO C89... none needed checking whether /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc understands -c and -o together... yes checking dependency style of /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc... none checking for /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc option to accept ISO C99... none needed checking for mips64el-buildroot-linux-uclibc-ar... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar checking the archiver (/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar) interface... ar checking build system type... x86_64-pc-linux-gnu checking host system type... mips64el-buildroot-linux-uclibc checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld checking if the linker (/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-nm checking the name lister (/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to mips64el-buildroot-linux-uclibc format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld option to reload object files... -r checking for mips64el-buildroot-linux-uclibc-objdump... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-objdump checking how to recognize dependent libraries... pass_all checking for mips64el-buildroot-linux-uclibc-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for mips64el-buildroot-linux-uclibc-ar... (cached) /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar checking for archiver @FILE support... @ checking for mips64el-buildroot-linux-uclibc-strip... (cached) /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-strip checking for mips64el-buildroot-linux-uclibc-ranlib... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib checking command to parse /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-nm output from /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mips64el-buildroot-linux-uclibc-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-cpp checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc supports -fno-rtti -fno-exceptions... no checking for /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc option to produce PIC... -fPIC -DPIC checking if /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc PIC flag -fPIC -DPIC works... yes checking if /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc static flag -static works... yes checking if /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc supports -c -o file.o... yes checking if /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc supports -c -o file.o... (cached) yes checking whether the /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc linker (/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ld -m elf64ltsmip) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to enable maintainer-specific portions of Makefiles... no checking for library containing AES_encrypt... -lcrypto checking sys/sysinfo.h usability... yes checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking for sysinfo... yes checking for struct sysinfo... yes checking for struct sysinfo.totalram... yes checking for struct sysinfo.mem_unit... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking openssl/aes.h usability... yes checking openssl/aes.h presence... yes checking for openssl/aes.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking for posix_memalign... yes checking for mmap... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking compiler_warnings... yes checking CFLAGS for maximum warnings... -Wall configure: checking POSIX compatibility... WARNING: POSIX violation: make's CC doesn't understand -lrt WARNING: POSIX violation: make's CC doesn't understand -lxnet WARNING: POSIX violation: clock_gettime() is not linkable ... done checking POSIX compatibility checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls >>> scrypt 1.3.0 Building PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 -C /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0/ make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' ( export CC="/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc"; export CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall"; command -p sh ./libcperciva/cpusupport/Build/cpusupport.sh "$PATH") > cpusupport-config.h.tmp && command -p mv cpusupport-config.h.tmp cpusupport-config.h Checking if compiler supports X86 CPUID feature... no Checking if compiler supports X86 CPUID_COUNT feature... no Checking if compiler supports X86 AESNI feature... no Checking if compiler supports X86 RDRAND feature... no Checking if compiler supports X86 SHANI feature... no Checking if compiler supports X86 SSE2 feature... no Checking if compiler supports X86 SSSE3 feature... no /usr/bin/make all-am make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o main.o main.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_aesni.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/cpusupport/cpusupport_x86_rdrand.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/asprintf.o libcperciva/util/asprintf.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/entropy.o libcperciva/util/entropy.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/getopt.o libcperciva/util/getopt.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/humansize.o libcperciva/util/humansize.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/monoclock.o libcperciva/util/monoclock.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/readpass.o libcperciva/util/readpass.c /bin/bash ./libtool --tag=CC --mode=compile /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/aesni_la-crypto_aes_aesni.lo `test -f 'libcperciva/crypto/crypto_aes_aesni.c' || echo './'`libcperciva/crypto/crypto_aes_aesni.c /bin/bash ./libtool --tag=CC --mode=compile /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo `test -f 'libcperciva/crypto/crypto_entropy_rdrand.c' || echo './'`libcperciva/crypto/crypto_entropy_rdrand.c /bin/bash ./libtool --tag=CC --mode=compile /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/alg/shani_la-sha256_shani.lo `test -f 'libcperciva/alg/sha256_shani.c' || echo './'`libcperciva/alg/sha256_shani.c /bin/bash ./libtool --tag=CC --mode=compile /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo `test -f 'lib/crypto/crypto_scrypt_smix_sse2.c' || echo './'`lib/crypto/crypto_scrypt_smix_sse2.c libtool: compile: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c libcperciva/crypto/crypto_aes_aesni.c -fPIC -DPIC -o libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o libtool: compile: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c libcperciva/crypto/crypto_entropy_rdrand.c -fPIC -DPIC -o libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/crypto/crypto_scrypt.o lib/crypto/crypto_scrypt.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/crypto/crypto_scrypt_smix.o lib/crypto/crypto_scrypt_smix.c libtool: compile: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c libcperciva/alg/sha256_shani.c -fPIC -DPIC -o libcperciva/alg/.libs/shani_la-sha256_shani.o /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/alg/sha256.o libcperciva/alg/sha256.c libtool: compile: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c lib/crypto/crypto_scrypt_smix_sse2.c -fPIC -DPIC -o lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_shani.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_sse2.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/cpusupport/cpusupport_x86_ssse3.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/insecure_memzero.o libcperciva/util/insecure_memzero.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/util/warnp.o libcperciva/util/warnp.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/scryptenc/scryptenc_cpuperf.o lib/scryptenc/scryptenc_cpuperf.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o lib/util/memlimit.o lib/util/memlimit.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aes.c In file included from lib/scryptenc/scryptenc.c:43:0: lib/scryptenc/scryptenc.c: In function 'scryptenc_setup': ./libcperciva/util/sysendian.h:54:19: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized] p[0] = (x >> 24) & 0xff; ^ lib/scryptenc/scryptenc.c:223:11: note: 'p' was declared here uint32_t p; ^ lib/scryptenc/scryptenc.c:233:4: warning: 'logN' may be used uninitialized in this function [-Wmaybe-uninitialized] N = (uint64_t)(1) << logN; ^ /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_aesctr.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_entropy.c /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o libcperciva/crypto/crypto_verify_bytes.o libcperciva/crypto/crypto_verify_bytes.c /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_AESNI}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o libcperciva_aesni.la libcperciva/crypto/aesni_la-crypto_aes_aesni.lo -lcrypto /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_RDRAND}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o libcperciva_rdrand.la libcperciva/crypto/rdrand_la-crypto_entropy_rdrand.lo -lcrypto /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SHANI} ${CFLAGS_X86_SSSE3}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o libcperciva_shani.la libcperciva/alg/shani_la-sha256_shani.lo -lcrypto /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc `. ./cpusupport-config.h; echo ${CFLAGS_X86_SSE2}` -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o libscrypt_sse2.la lib/crypto/libscrypt_sse2_la-crypto_scrypt_smix_sse2.lo -lcrypto libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar cru .libs/libcperciva_aesni.a libcperciva/crypto/.libs/aesni_la-crypto_aes_aesni.o libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib .libs/libcperciva_aesni.a libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar cru .libs/libcperciva_rdrand.a libcperciva/crypto/.libs/rdrand_la-crypto_entropy_rdrand.o libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib .libs/libcperciva_rdrand.a libtool: link: ( cd ".libs" && rm -f "libcperciva_aesni.la" && ln -s "../libcperciva_aesni.la" "libcperciva_aesni.la" ) /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o tests/verify-strings/test_scrypt.o tests/verify-strings/test_scrypt.c libtool: link: ( cd ".libs" && rm -f "libcperciva_rdrand.la" && ln -s "../libcperciva_rdrand.la" "libcperciva_rdrand.la" ) /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -DHAVE_CONFIG_H -I. -I./lib -I./lib/crypto -I./lib/scryptenc -I./lib/util -I./libcperciva/alg -I./libcperciva/cpusupport -I./libcperciva/crypto -I./libcperciva/util -DCPUSUPPORT_CONFIG_FILE=\"cpusupport-config.h\" -D_POSIX_C_SOURCE=200809L -D_XOPEN_SOURCE=700 -DPOSIXFAIL_CLOCK_GETTIME -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -c -o tests/valgrind/potential-memleaks.o tests/valgrind/potential-memleaks.c libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar cru .libs/libcperciva_shani.a libcperciva/alg/.libs/shani_la-sha256_shani.o libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib .libs/libcperciva_shani.a libtool: link: ( cd ".libs" && rm -f "libcperciva_shani.la" && ln -s "../libcperciva_shani.la" "libcperciva_shani.la" ) /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ar cru .libs/libscrypt_sse2.a lib/crypto/.libs/libscrypt_sse2_la-crypto_scrypt_smix_sse2.o libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-ranlib .libs/libscrypt_sse2.a libtool: link: ( cd ".libs" && rm -f "libscrypt_sse2.la" && ln -s "../libscrypt_sse2.la" "libscrypt_sse2.la" ) /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o scrypt main.o lib/crypto/crypto_scrypt.o lib/crypto/crypto_scrypt_smix.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib/util/memlimit.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o libcperciva_aesni.la libcperciva_rdrand.la libcperciva_shani.la libscrypt_sse2.la -lcrypto /bin/bash ./libtool --tag=CC --mode=link /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt.o lib/crypto/crypto_scrypt_smix.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o libcperciva_shani.la libscrypt_sse2.la -lcrypto libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o tests/valgrind/potential-memleaks tests/valgrind/potential-memleaks.o -lcrypto libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o tests/verify-strings/test_scrypt tests/verify-strings/test_scrypt.o lib/crypto/crypto_scrypt.o lib/crypto/crypto_scrypt_smix.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a -lcrypto libtool: link: /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -o scrypt main.o lib/crypto/crypto_scrypt.o lib/crypto/crypto_scrypt_smix.o libcperciva/alg/sha256.o libcperciva/cpusupport/cpusupport_x86_shani.o libcperciva/cpusupport/cpusupport_x86_sse2.o libcperciva/cpusupport/cpusupport_x86_ssse3.o libcperciva/util/insecure_memzero.o libcperciva/util/warnp.o lib/scryptenc/scryptenc.o lib/scryptenc/scryptenc_cpuperf.o lib/util/memlimit.o libcperciva/cpusupport/cpusupport_x86_aesni.o libcperciva/cpusupport/cpusupport_x86_rdrand.o libcperciva/crypto/crypto_aes.o libcperciva/crypto/crypto_aesctr.o libcperciva/crypto/crypto_entropy.o libcperciva/crypto/crypto_verify_bytes.o libcperciva/util/asprintf.o libcperciva/util/entropy.o libcperciva/util/getopt.o libcperciva/util/humansize.o libcperciva/util/monoclock.o libcperciva/util/readpass.o ./.libs/libcperciva_aesni.a ./.libs/libcperciva_rdrand.a ./.libs/libcperciva_shani.a ./.libs/libscrypt_sse2.a -lcrypto make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' >>> scrypt 1.3.0 Installing to staging directory PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot install -C /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0/ make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' /usr/bin/make install-am make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/bin' /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/share/man/man1' /bin/bash ./libtool --mode=install /usr/bin/install -c scrypt '/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c -m 644 scrypt.1 '/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/share/man/man1' libtool: install: /usr/bin/install -c scrypt /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/bin/scrypt make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' >>> scrypt 1.3.0 Fixing libtool files for la in $(find /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/peko/autobuild/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ -e "s:/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/home/peko/autobuild/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> scrypt 1.3.0 Installing to target PATH="/home/peko/autobuild/instance-1/output-1/host/bin:/home/peko/autobuild/instance-1/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/peko/autobuild/instance-1/output-1/target install -C /home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0/ make[1]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' /usr/bin/make install-am make[2]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[3]: Entering directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/bin' /bin/mkdir -p '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man1' /bin/bash ./libtool --mode=install /usr/bin/install -c scrypt '/home/peko/autobuild/instance-1/output-1/target/usr/bin' /usr/bin/install -c -m 644 scrypt.1 '/home/peko/autobuild/instance-1/output-1/target/usr/share/man/man1' libtool: install: /usr/bin/install -c scrypt /home/peko/autobuild/instance-1/output-1/target/usr/bin/scrypt make[3]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[2]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' make[1]: Leaving directory '/home/peko/autobuild/instance-1/output-1/build/scrypt-1.3.0' Borealis_sound_theme_ogg-0.9a.tar.bz2: OK (sha256: dd80a9c6317de29d42786ba7d95b114b64d06ec6c0c17dd18df853a5c668e727) >>> sound-theme-borealis 0.9a Extracting bzcat /home/peko/autobuild/instance-1/dl/sound-theme-borealis/Borealis_sound_theme_ogg-0.9a.tar.bz2 | /home/peko/autobuild/instance-1/output-1/host/bin/tar --strip-components=1 -C /home/peko/autobuild/instance-1/output-1/build/sound-theme-borealis-0.9a -xf - >>> sound-theme-borealis 0.9a Patching >>> sound-theme-borealis 0.9a Configuring >>> sound-theme-borealis 0.9a Building >>> sound-theme-borealis 0.9a Installing to target for f in /home/peko/autobuild/instance-1/output-1/build/sound-theme-borealis-0.9a/*.ogg ; do /usr/bin/install -D -m 0644 $f /home/peko/autobuild/instance-1/output-1/target/usr/share/sounds/borealis/stereo/`basename $f` || exit 1; done >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/peko/autobuild/instance-1/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-%g' -e 's%@TARGET_ARCH@%mips64%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%little%g' -e 's%@TARGET_CFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os"@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_CXXFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os"@PKG_TARGET_CFLAGS@%g' -e 's%@HOST_DIR@%/home/peko/autobuild/instance-1/output-1/host%g' -e 's%@STAGING_DIR@%/home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot%g' -e 's%@STATIC@%$(if $(BR2_STATIC_LIBS),true,false)%g' package/meson//cross-compilation.conf.in > /home/peko/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/peko/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf.in > /home/peko/autobuild/instance-1/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/peko/autobuild/instance-1/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/peko/autobuild/instance-1/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/ash$' /home/peko/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /home/peko/autobuild/instance-1/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/peko/autobuild/instance-1/output-1/build/busybox-1.31.1/.config; then grep -qsE '^/bin/hush$' /home/peko/autobuild/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /home/peko/autobuild/instance-1/output-1/target/etc/shells; fi mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc echo "buildroot" > /home/peko/autobuild/instance-1/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/peko/autobuild/instance-1/output-1/target/etc/hosts mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /home/peko/autobuild/instance-1/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/peko/autobuild/instance-1/output-1/target/etc/shadow rm -f /home/peko/autobuild/instance-1/output-1/target/bin/sh if [ -x /home/peko/autobuild/instance-1/output-1/target/sbin/swapon -a -x /home/peko/autobuild/instance-1/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/peko/autobuild/instance-1/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/peko/autobuild/instance-1/output-1/target/etc/inittab; fi rm -f /home/peko/autobuild/instance-1/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/peko/autobuild/instance-1/output-1/build/locales.nopurge; done for dir in /home/peko/autobuild/instance-1/output-1/target/usr/share/locale /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale /home/peko/autobuild/instance-1/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/peko/autobuild/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/peko/autobuild/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/include /home/peko/autobuild/instance-1/output-1/target/usr/share/aclocal \ /home/peko/autobuild/instance-1/output-1/target/usr/lib/pkgconfig /home/peko/autobuild/instance-1/output-1/target/usr/share/pkgconfig \ /home/peko/autobuild/instance-1/output-1/target/usr/lib/cmake /home/peko/autobuild/instance-1/output-1/target/usr/share/cmake \ /home/peko/autobuild/instance-1/output-1/target/usr/doc find /home/peko/autobuild/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/peko/autobuild/instance-1/output-1/target/lib/ /home/peko/autobuild/instance-1/output-1/target/usr/lib/ /home/peko/autobuild/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f find: '/home/peko/autobuild/instance-1/output-1/target/usr/libexec/': No such file or directory rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/gdb rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/bash-completion rm -rf /home/peko/autobuild/instance-1/output-1/target/etc/bash_completion.d rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/zsh rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/man /home/peko/autobuild/instance-1/output-1/target/usr/share/man rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/info /home/peko/autobuild/instance-1/output-1/target/usr/share/info rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/doc /home/peko/autobuild/instance-1/output-1/target/usr/share/doc rm -rf /home/peko/autobuild/instance-1/output-1/target/usr/share/gtk-doc rmdir /home/peko/autobuild/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /home/peko/autobuild/instance-1/output-1/target/lib/debug /home/peko/autobuild/instance-1/output-1/target/usr/lib/debug find /home/peko/autobuild/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/peko/autobuild/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/peko/autobuild/instance-1/output-1/host/bin/mips64el-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/peko/autobuild/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/peko/autobuild/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/peko/autobuild/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2020.05.1-187-gd86b338740"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2020.05.2"; \ echo "PRETTY_NAME=\"Buildroot 2020.05.2\"" \ ) > /home/peko/autobuild/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/peko/autobuild/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/peko/autobuild/instance-1/output-1/per-package /home/peko/autobuild/instance-1/buildroot/support/scripts/fix-rpath target touch /home/peko/autobuild/instance-1/output-1/target/usr ln -snf /home/peko/autobuild/instance-1/output-1/host/mips64el-buildroot-linux-uclibc/sysroot /home/peko/autobuild/instance-1/output-1/staging make: Leaving directory '/home/peko/autobuild/instance-1/buildroot' make: Entering directory '/home/peko/autobuild/instance-1/buildroot' >>> Buildroot 2020.05.1-187-gd86b338740 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> host-tar 1.29 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> alsa-lib 1.2.2 Collecting legal info COPYING: OK (sha256: 32434afcc8666ba060e111d715bfdb6c2d5dd8a35fa4d3ab8ad67d8f850d2f2b) aserver/COPYING: OK (sha256: bfe16cf823bcff261fc6a062c07ee96660e3c39678f42f39a788a68dbc234ced) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> alsa-utils 1.2.2 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) >>> host-gettext Collecting legal info >>> host-gettext-tiny adaa9c64921e80f2b8dd3610ffb508618b9204f3 Collecting legal info LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34) extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> busybox 1.31.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> util-linux 2.35.1 Collecting legal info README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955) Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d) Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8) Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63) Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> zlib Collecting legal info >>> libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> cdrkit 1.1.11 Collecting legal info COPYING: OK (sha256: 90daae00475a992a367da5b0658469a5d1c4449dbbe964c5b7246e1aec92f491) >>> libcap 2.27 Collecting legal info License: OK (sha256: 088cabde4662b4121258d298b0b2967bc1abffa134457ed9bc4a359685ab92bc) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-libcap 2.27 Collecting legal info License: OK (sha256: 088cabde4662b4121258d298b0b2967bc1abffa134457ed9bc4a359685ab92bc) >>> czmq 4.2.0 Collecting legal info LICENSE: OK (sha256: 1f256ecad192880510e84ad60474eab7589218784b9a50bc7ceee34c2b91f1d5) >>> zeromq 4.3.3 Collecting legal info COPYING: OK (sha256: 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3) COPYING.LESSER: OK (sha256: 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6) >>> ding-libs 0.6.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LESSER: OK (sha256: 6c57f43c939054fd4b831f271a14c97a488c38f98cdda5e887c5d396e3b3bc58) >>> dvdrw-tools 7.1 Collecting legal info LICENSE: OK (sha256: 91df39d1816bfb17a4dda2d3d2c83b1f6f2d38d53e53e41e8f97ad5ac46a0cad) >>> faifa 0.1 Collecting legal info COPYING: OK (sha256: 9b62e4601b2b9cd5719a393e88ed71a8304048862502db765ed9d6ff8cf38c5e) >>> libpcap 1.9.1 Collecting legal info LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd) >>> host-bison 3.4.2 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> fftw-single 3.3.8 Collecting legal info COPYING: OK (sha256: 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c) >>> flare-engine 1.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> sdl2 2.0.12 Collecting legal info COPYING.txt: OK (sha256: ae4df3759a726538607b84c00ab8f8a5567d9f38ad5397486eb9b5c5f626caef) >>> sdl2_image 2.0.5 Collecting legal info COPYING.txt: OK (sha256: 45079362e2230154205413a6940544ca94e3479ccf76205c71c4f542a6815d25) >>> sdl2_mixer 2.0.4 Collecting legal info COPYING.txt: OK (sha256: 113727180e7956cb9718b03b41da85b63ea54743a33047071a623bf672895a10) >>> sdl2_ttf 2.0.15 Collecting legal info COPYING.txt: OK (sha256: f6370809c9f644760920d9945c5be07aed17664975f2e4741013d4d9a2ec696f) >>> freetype 2.10.1 Collecting legal info docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb) docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1) docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18) >>> flex 2.6.4 Collecting legal info COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273) >>> fstrcmp 0.7.D001 Collecting legal info LICENSE: OK (sha256: 5352e426b563eda9252d76be92337b49f7b5cfdd1302a1e8d99389840c0e46be) >>> hackrf 2018.01.1 Collecting legal info COPYING: OK (sha256: 49b60a6288f90f49074228cc1fae0fb16871ba36b756013abdf7c2fc92f01fad) >>> libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> ibrcommon 1.0.1 Collecting legal info COPYING: OK (sha256: 1a0b57773a46d9d4cc2f0d1780a17acc38af506bb1e0234aaa85f8ccd6dc0b92) README: OK (sha256: 9b8a430c2136ebcf76bd37f50da7d7a80ede413ec6604cc4694ea536e779854c) >>> openssl Collecting legal info >>> libopenssl 1.1.1g Collecting legal info LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c) >>> ibrdtn 1.0.1 Collecting legal info COPYING: OK (sha256: 809fa1ed21450f59827d1e9aec720bbc4b687434fa22283c6cb5dd82a47ab9c0) >>> ibrdtnd 1.0.1 Collecting legal info COPYING: OK (sha256: 0d542e0c8804e39aa7f37eb00da5a762149dc682d7829451287e11b938e94594) >>> initscripts Collecting legal info >>> inotify-tools 3.20.1 Collecting legal info COPYING: OK (sha256: e41fc126320a79ed53b5aa3386f059f7d10770856d6fd714ab80a96ce6bd09d6) >>> jimtcl 0.79 Collecting legal info LICENSE: OK (sha256: 419f1146334e57fb258d6c957d1f94d43455ec0d24b1b54c4447e5f61a353950) >>> libarchive 3.4.2 Collecting legal info COPYING: OK (sha256: e1e3d4ba9d0b0ccba333b5f5539f7c6c9a3ef3d57a96cd165d2c45eaa1cd026d) >>> libcli 1.10.2 Collecting legal info COPYING: OK (sha256: 376b54d4c5f4aa99421823fa4da93e3ab73096fce2400e89858632aa7da24a14) >>> libcue 2.2.1 Collecting legal info LICENSE: OK (sha256: c388d36583fa54e13b6d73ad924d0b68d073ed8a5771e17cb49104705df4504f) >>> libevent 2.1.11 Collecting legal info LICENSE: OK (sha256: ff02effc9b331edcdac387d198691bfa3e575e7d244ad10cb826aa51ef085670) >>> libldns 1.7.1 Collecting legal info LICENSE: OK (sha256: 9e0b1505c358d1a7c79555ee8bd1acbe2985dbc74dd81f3697cebf2161e922e6) >>> liblinear 2.30 Collecting legal info COPYRIGHT: OK (sha256: c366abf1cb3a003d8c6e6d9c111a23c432db1d001294f88d479b70b60d7c0af2) >>> libpjsip 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> libsrtp 2.2.0 Collecting legal info LICENSE: OK (sha256: 8e19d42a1eec9561f3f347253ddf2e385c55f392f025bb0fd41b88dbf38db5ae) >>> libyang 1.0.130 Collecting legal info LICENSE: OK (sha256: f942fe693e03e4e3ff67a351c00dc8f468a042e0d7273b0aa6bc53060b568112) >>> pcre 8.44 Collecting legal info LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3) >>> memcached 1.5.19 Collecting legal info COPYING: OK (sha256: bc887c4ad8051fe690ace9528fe37a2e0bb362e6d963331d82e845ca9b585a0c) >>> minizip 2.9.2 Collecting legal info LICENSE: OK (sha256: 675181c03fc1302a1c8554c00f7be9bb420c5dbc9dcc2013433cec144413de03) >>> host-mtools 4.0.24 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-lzip 1.21 Collecting legal info COPYING: OK (sha256: 3d77c1a58fbde5ddba612d1fe09965e20a3804953eca12e8c1892298bb8a5eef) >>> nginx 1.17.9 Collecting legal info LICENSE: OK (sha256: 28ad30e2f64bd89ac1287b4606906bb99ed04d9f4e13fb6564a0be9c8a23f509) >>> p7zip 16.02 Collecting legal info DOC/License.txt: OK (sha256: 555806657dcf0f1e720b581c52643c195ec86ae3f00bd18cc66d2e0f88ffa210) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> reaver 1.6.5 Collecting legal info docs/LICENSE: OK (sha256: bb40cfd5e9ca6e8465ea3c236f3f2293e8300af1bfe87e72fabe482ae6cc995a) >>> scrypt 1.3.0 Collecting legal info COPYRIGHT: OK (sha256: adc1942c42da6e3370223a27ff4a6835924d2b41e509f9bee58a5e6ca1bbddae) >>> sound-theme-borealis 0.9a Collecting legal info WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: sound-theme-borealis-0.9a: cannot save license (SOUND_THEME_BOREALIS_LICENSE_FILES not defined) Legal info produced in /home/peko/autobuild/instance-1/output-1/legal-info make: Leaving directory '/home/peko/autobuild/instance-1/buildroot'