See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/lib'
make[2]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/lib'
Making install in src
make[2]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/src'
make[3]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/src'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin'
libtool: install: /usr/bin/install -c sg_bg_ctl /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_bg_ctl
libtool: install: /usr/bin/install -c sg_compare_and_write /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_compare_and_write
libtool: install: /usr/bin/install -c sg_decode_sense /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_decode_sense
libtool: install: /usr/bin/install -c sg_format /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_format
libtool: install: /usr/bin/install -c sg_get_config /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_get_config
libtool: install: /usr/bin/install -c sg_get_elem_status /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_get_elem_status
libtool: install: /usr/bin/install -c sg_get_lba_status /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_get_lba_status
libtool: install: /usr/bin/install -c sg_ident /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_ident
libtool: install: /usr/bin/install -c sg_inq /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_inq
libtool: install: /usr/bin/install -c sg_logs /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_logs
libtool: install: /usr/bin/install -c sg_luns /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_luns
libtool: install: /usr/bin/install -c sg_modes /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_modes
libtool: install: /usr/bin/install -c sg_opcodes /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_opcodes
libtool: install: /usr/bin/install -c sg_persist /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_persist
libtool: install: /usr/bin/install -c sg_prevent /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_prevent
libtool: install: /usr/bin/install -c sg_raw /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_raw
libtool: install: /usr/bin/install -c sg_rdac /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_rdac
libtool: install: /usr/bin/install -c sg_read_attr /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_read_attr
libtool: install: /usr/bin/install -c sg_read_block_limits /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_read_block_limits
libtool: install: /usr/bin/install -c sg_read_buffer /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_read_buffer
libtool: install: /usr/bin/install -c sg_read_long /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_read_long
libtool: install: /usr/bin/install -c sg_readcap /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_readcap
libtool: install: /usr/bin/install -c sg_reassign /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_reassign
libtool: install: /usr/bin/install -c sg_referrals /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_referrals
libtool: install: /usr/bin/install -c sg_rep_zones /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_rep_zones
libtool: install: /usr/bin/install -c sg_requests /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_requests
libtool: install: /usr/bin/install -c sg_reset_wp /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_reset_wp
libtool: install: /usr/bin/install -c sg_rmsn /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_rmsn
libtool: install: /usr/bin/install -c sg_rtpg /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_rtpg
libtool: install: /usr/bin/install -c sg_safte /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_safte
libtool: install: /usr/bin/install -c sg_sanitize /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sanitize
libtool: install: /usr/bin/install -c sg_sat_identify /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sat_identify
libtool: install: /usr/bin/install -c sg_sat_phy_event /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sat_phy_event
libtool: install: /usr/bin/install -c sg_sat_read_gplog /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sat_read_gplog
libtool: install: /usr/bin/install -c sg_sat_set_features /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sat_set_features
libtool: install: /usr/bin/install -c sg_seek /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_seek
libtool: install: /usr/bin/install -c sg_senddiag /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_senddiag
libtool: install: /usr/bin/install -c sg_ses /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_ses
libtool: install: /usr/bin/install -c sg_ses_microcode /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_ses_microcode
libtool: install: /usr/bin/install -c sg_start /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_start
libtool: install: /usr/bin/install -c sg_stpg /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_stpg
libtool: install: /usr/bin/install -c sg_stream_ctl /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_stream_ctl
libtool: install: /usr/bin/install -c sg_sync /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_sync
libtool: install: /usr/bin/install -c sg_timestamp /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_timestamp
libtool: install: /usr/bin/install -c sg_turs /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_turs
libtool: install: /usr/bin/install -c sg_unmap /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_unmap
libtool: install: /usr/bin/install -c sg_verify /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_verify
libtool: install: /usr/bin/install -c sg_vpd /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_vpd
libtool: install: /usr/bin/install -c sg_wr_mode /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_wr_mode
libtool: install: /usr/bin/install -c sg_write_buffer /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_write_buffer
libtool: install: /usr/bin/install -c sg_write_long /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_write_long
libtool: install: /usr/bin/install -c sg_write_same /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_write_same
libtool: install: /usr/bin/install -c sg_write_verify /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_write_verify
libtool: install: /usr/bin/install -c sg_write_x /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_write_x
libtool: install: /usr/bin/install -c sg_zone /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_zone
libtool: install: /usr/bin/install -c sg_copy_results /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_copy_results
libtool: install: /usr/bin/install -c sg_dd /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_dd
libtool: install: /usr/bin/install -c sg_emc_trespass /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_emc_trespass
libtool: install: /usr/bin/install -c sg_map /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_map
libtool: install: /usr/bin/install -c sg_map26 /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_map26
libtool: install: /usr/bin/install -c sg_rbuf /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_rbuf
libtool: install: /usr/bin/install -c sg_read /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_read
libtool: install: /usr/bin/install -c sg_reset /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_reset
libtool: install: /usr/bin/install -c sg_scan /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_scan
libtool: install: /usr/bin/install -c sg_test_rwbuf /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_test_rwbuf
libtool: install: /usr/bin/install -c sg_xcopy /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sg_xcopy
libtool: install: /usr/bin/install -c sginfo /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sginfo
libtool: install: /usr/bin/install -c sgm_dd /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sgm_dd
libtool: install: /usr/bin/install -c sgp_dd /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/sgp_dd
make[3]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/src'
make[2]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/src'
Making install in doc
make[2]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/doc'
make[3]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/doc'
make[3]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/share/man/man8'
 /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/share/man/man8'
 /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/share/man/man8'
make[3]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/doc'
make[2]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/doc'
Making install in scripts
make[2]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/scripts'
make[3]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/scripts'
make[3]: Nothing to be done for 'install-data-am'.
 /bin/mkdir -p '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin'
 /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin'
make[3]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/scripts'
make[2]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45/scripts'
make[2]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45'
make[3]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45'
make[2]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45'
make[1]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-sg3_utils-1.45'
utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz: OK (sha256: 8b5ba0058a78de69faf6822bb10b457fff2f9e55dc112ccb81c35214b061c6e6)
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Extracting
gzip -d -c /nvme/rc-buildroot-test/scripts/instance-1/dl/utp_com/utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6.tar.gz | tar --strip-components=1 -C /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6   -xf -
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Patching
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Configuring
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Building
PATH="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin:/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/aws/bin:/root/bin" PKG_CONFIG="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 PKG_CONFIG_LIBDIR="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib/pkgconfig:/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/share/pkgconfig" AR="/usr/bin/ar" AS="/usr/bin/as" LD="/usr/bin/ld" NM="/usr/bin/nm" CC="/usr/bin/gcc" GCC="/usr/bin/gcc" CXX="/usr/bin/g++" CPP="/usr/bin/cpp" OBJCOPY="/usr/bin/objcopy" RANLIB="/usr/bin/ranlib" CPPFLAGS="-I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" CFLAGS="-O2 -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" CXXFLAGS="-O2 -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" LDFLAGS="-L/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib -Wl,-rpath,/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib" INTLTOOL_PERL=/usr/bin/perl /usr/bin/make -j4 -C /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6
make[1]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6'
/usr/bin/gcc -c -o utp_com.o utp_com.c -O2 -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include
/usr/bin/gcc -o utp_com utp_com.o -L/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib -Wl,-rpath,/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib
make[1]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6'
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Installing to host directory
/usr/bin/install -D -m 755 /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/host-utp_com-dee512ced1e9367d223d22f10797fbf9aeacfab6/utp_com /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/utp_com
wavemon-0.9.1.tar.gz: OK (sha256: 5ebd5b79d3b7c546bc16b95161872c699a75e9acdfc6e3f02ec48dad10802067)
>>> wavemon 0.9.1 Extracting
gzip -d -c /nvme/rc-buildroot-test/scripts/instance-1/dl/wavemon/wavemon-0.9.1.tar.gz | tar --strip-components=1 -C /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1   -xf -
>>> wavemon 0.9.1 Patching
>>> wavemon 0.9.1 Updating config.sub and config.guess
for file in config.guess config.sub; do for i in $(find /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1 -name $file); do cp support/gnuconfig/$file $i; done; done
>>> wavemon 0.9.1 Patching libtool
>>> wavemon 0.9.1 Configuring
(cd /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1/ && rm -rf config.cache && PATH="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin:/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/aws/bin:/root/bin" AR="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-ar" AS="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-as" LD="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-ld" NM="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-nm" CC="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc" GCC="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc" CPP="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-cpp" CXX="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-g++" FC="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gfortran" F77="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gfortran" RANLIB="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-ranlib" READELF="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-readelf" STRIP="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-strip" OBJCOPY="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-objcopy" OBJDUMP="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib -Wl,-rpath,/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-as" DEFAULT_LINKER="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os    -Wl,-elf2flt -static" CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os    -Wl,-elf2flt -static  -Wl,-elf2flt -static" LDFLAGS=" -Wl,-elf2flt -static" FCFLAGS=" -Os   -Wl,-elf2flt -static" FFLAGS=" -Os   -Wl,-elf2flt -static" PKG_CONFIG="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot" INTLTOOL_PERL=/usr/bin/perl ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no   CONFIG_SITE=/dev/null ./configure --target=arm-buildroot-uclinux-uclibcgnueabi --host=arm-buildroot-uclinux-uclibcgnueabi --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --enable-static --disable-shared   )
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --enable-static, --disable-shared
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-buildroot-uclinux-uclibcgnueabi
checking for arm-buildroot-uclinux-uclibcgnueabi-gcc... /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc accepts -g... yes
checking for /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-cpp
checking for a BSD-compatible install... /usr/bin/install -c
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking whether time.h and sys/time.h may both be included... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking ncurses.h usability... yes
checking ncurses.h presence... yes
checking for ncurses.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking net/if_arp.h usability... yes
checking net/if_arp.h presence... yes
checking for net/if_arp.h... yes
checking netinet/ether.h usability... yes
checking netinet/ether.h presence... yes
checking for netinet/ether.h... yes
checking net/ethernet.h usability... yes
checking net/ethernet.h presence... yes
checking for net/ethernet.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for sys/socket.h... yes
checking for linux/if.h... yes
checking for linux/wireless.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for pow in -lm... yes
checking for waddstr in -lncurses... yes
checking for pthread_create in -lpthread... yes
checking for cap_get_flag in -lcap... no
checking for gettimeofday... yes
checking for ether_ntohost... yes
checking pkg-config is at least version 0.9.0... yes
checking for LIBNL3... yes
checking for LIBNL3_GENL... yes
checking whether /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc needs -traditional... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
configure: creating ./config.status
config.status: creating Makefile
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --enable-static, --disable-shared
>>> wavemon 0.9.1 Building
PATH="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin:/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/aws/bin:/root/bin"  /usr/bin/make -j4 CC="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc" -C /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1/
make[1]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1'
 CC   about_scr.c
 CC   conf.c
 CC   conf_scr.c
 CC   error.c
 CC   help_scr.c
 CC   info_scr.c
 CC   iw_if.c
 CC   iw_nl80211.c
 CC   iw_scan.c
 CC   lhist_scr.c
 CC   llist.c
 CC   scan_scr.c
 CC   ui.c
 CC   utils.c
/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-gcc -O2 -Wall -pthread -I/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/include/libnl3  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-elf2flt -static  wavemon.c about_scr.o conf.o conf_scr.o error.o help_scr.o info_scr.o iw_if.o iw_nl80211.o iw_scan.o lhist_scr.o llist.o scan_scr.o ui.o utils.o  -lncurses -lm  -L/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib -lnl-genl-3 -lnl-3 -lpthread  -L/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib -lnl-3 -lpthread  -o wavemon
make[1]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1'
>>> wavemon 0.9.1 Installing to target
PATH="/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin:/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/aws/bin:/root/bin"  /usr/bin/make -j4 DESTDIR=/nvme/rc-buildroot-test/scripts/instance-1/output-1/target install -C /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1/
make[1]: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1'
/usr/bin/install -c -m 0755 -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/bin
/usr/bin/install -c -m 0755 wavemon /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/bin
/usr/bin/install -c -m 0755 -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/man/man1
/usr/bin/install -c -m 0644 wavemon.1 /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/man/man1
/usr/bin/install -c -m 0755 -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/man/man5
/usr/bin/install -c -m 0644 wavemonrc.5 /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/man/man5
/usr/bin/install -c -m 0755 -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/wavemon
/usr/bin/install -c -m 0644 README.md NEWS THANKS AUTHORS COPYING ChangeLog /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/wavemon
make[1]: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/output-1/build/wavemon-0.9.1'
>>>   Finalizing host directory
>>>   Finalizing target directory
mkdir -p /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/etc/meson
sed -e 's%@TARGET_CROSS@%/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-%g' -e 's%@TARGET_ARCH@%arm%g' -e 's%@TARGET_CPU@%cortex-m4%g' -e 's%@TARGET_ENDIAN@%little%g' -e 's%@TARGET_CFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os", "-Wl,-elf2flt", "-static"@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_LDFLAGS@%"-Wl,-elf2flt", "-static"@PKG_TARGET_CFLAGS@%g' -e 's%@TARGET_CXXFLAGS@%"-D_LARGEFILE_SOURCE", "-D_LARGEFILE64_SOURCE", "-D_FILE_OFFSET_BITS=64", "-Os", "-Wl,-elf2flt", "-static", "-Wl,-elf2flt", "-static"@PKG_TARGET_CFLAGS@%g' -e 's%@HOST_DIR@%/nvme/rc-buildroot-test/scripts/instance-1/output-1/host%g' -e 's%@STAGING_DIR@%/nvme/rc-buildroot-test/scripts/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot%g' -e 's%@STATIC@%$(if $(BR2_STATIC_LIBS),true,false)%g' package/meson//cross-compilation.conf.in > /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/etc/meson/cross-compilation.conf.in
sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/etc/meson/cross-compilation.conf.in > /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/etc/meson/cross-compilation.conf
mkdir -p /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc
echo "buildroot" > /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/hostname
/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/hosts
mkdir -p /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc
echo "Welcome to Buildroot" > /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/issue
/bin/sed -i -e s,^root:[^:]*:,root::, /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/shadow
rm -f /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/bin/sh
rm -f /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/locales.nopurge
for i in C en_US locale-archive; do echo $i >> /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/locales.nopurge; done
for dir in /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/locale /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/X11/locale /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /nvme/rc-buildroot-test/scripts/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done
if [ -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/include /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/aclocal \
	/nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/pkgconfig /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/pkgconfig \
	/nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/cmake /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/cmake \
	/nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/doc
find /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/lib/ /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/ /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/libexec/ \
	\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
find: '/nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/libexec/': No such file or directory
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/gdb
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/bash-completion
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/bash_completion.d
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/zsh
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/man /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/man
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/info /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/info
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/doc /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/doc
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share/gtk-doc
rmdir /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/share 2>/dev/null || true
rm -rf /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/lib/debug /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/debug
find /nvme/rc-buildroot-test/scripts/instance-1/output-1/target   -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
find /nvme/rc-buildroot-test/scripts/instance-1/output-1/target   \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true
test -f /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/ld.so.conf && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc/ld.so.conf.d && \
	{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc
( \
	echo "NAME=Buildroot"; \
	echo "VERSION=2020.02-1795-g5935b68772"; \
	echo "ID=buildroot"; \
	echo "VERSION_ID=2020.05.2"; \
	echo "PRETTY_NAME=\"Buildroot 2020.05.2\"" \
) >  /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr/lib/os-release
ln -sf ../usr/lib/os-release /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/etc
>>>   Sanitizing RPATH in target tree
PER_PACKAGE_DIR=/nvme/rc-buildroot-test/scripts/instance-1/output-1/per-package /nvme/rc-buildroot-test/scripts/instance-1/buildroot/support/scripts/fix-rpath target
touch /nvme/rc-buildroot-test/scripts/instance-1/output-1/target/usr
ln -snf /nvme/rc-buildroot-test/scripts/instance-1/output-1/host/arm-buildroot-uclinux-uclibcgnueabi/sysroot /nvme/rc-buildroot-test/scripts/instance-1/output-1/staging
make: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/buildroot'
make: Entering directory '/nvme/rc-buildroot-test/scripts/instance-1/buildroot'
>>>   Buildroot 2020.02-1795-g5935b68772 Collecting legal info
COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4)
>>> toolchain-external  Collecting legal info
>>> host-skeleton  Collecting legal info
>>> skeleton  Collecting legal info
>>> skeleton-init-none  Collecting legal info
>>> skeleton-init-common  Collecting legal info
>>> toolchain-external-custom  Collecting legal info
>>> toolchain  Collecting legal info
>>> bridge-utils 1.6 Collecting legal info
COPYING: OK (sha256: 995a31f60a9ddb4c609214cc7d17ca94cc3cbc7f37e1e64dba81e7f8ea9d4f91)
>>> host-autoconf 2.69 Collecting legal info
COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2)
>>> host-libtool 2.4.6 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-m4 1.4.18 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-automake 1.15.1 Collecting legal info
COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6)
>>> brotli 1.0.9 Collecting legal info
LICENSE: OK (sha512: bae78184c2f50f86d8c727826d3982c469454c42b9af81f4ef007e39036434fa894cf5be3bf5fc65b7de2301f0a72d067a8186e303327db8a96bd14867e0a3a8)
>>> host-cmake 3.15.5 Collecting legal info
Copyright.txt: OK (sha256: dc628fb936a5d229296d42083f9a8218aa32204c016919e784404c9ec58776e9)
>>> host-pkgconf 1.6.1 Collecting legal info
COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04)
>>> host-btrfs-progs 5.6 Collecting legal info
COPYING: OK (sha256: 0d5bf346df9e635a29dcdddf832dc5b002ca6cdc1c5c9c6c567d2a61bb0c5c15)
libbtrfsutil/COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986)
libbtrfsutil/COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118)
>>> host-lzo 2.10 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-util-linux 2.35.1 Collecting legal info
README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-zlib  Collecting legal info
>>> host-libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> cairo 1.16.0 Collecting legal info
COPYING: OK (sha256: 67228a9f7c5f9b67c58f556f1be178f62da4d9e2e6285318d8c74d567255abdf)
COPYING-LGPL-2.1: OK (sha256: 9e9e8608c4cdda51a78cc3a385f4ec9a2e4c96d5ecad74ac8bca5fca3e563b7d)
COPYING-MPL-1.1: OK (sha256: 53692a2ed6c6a2c6ec9b32dd0b820dfae91e0a1fcdf625ca9ed0bdf8705fcc4f)
>>> fontconfig 2.13.1 Collecting legal info
COPYING: OK (sha256: fa4cd9ab005185e10cd8f7504518856c7dd36c01e766c2bac87f4fc638e9f886)
>>> expat 2.2.9 Collecting legal info
COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76)
>>> freetype 2.10.1 Collecting legal info
docs/LICENSE.TXT: OK (sha256: fd056de4196903a676208ef58cfddafc7d583d1f28fa2e44c309cf84a59e62fb)
docs/FTL.TXT: OK (sha256: 08c135755dd589039470f1fdbb400daaabaaa50d0b366d19cebff4d22986baa1)
docs/GPLv2.TXT: OK (sha256: c4120c6752c910c299e3bd9cb3a46ff262c268303ca2069b61f92f10a5656c18)
>>> zlib  Collecting legal info
>>> libzlib 1.2.11 Collecting legal info
README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15)
>>> host-gperf 3.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> util-linux 2.35.1 Collecting legal info
README.licensing: OK (sha256: 869660b5269f4f40a8a679da7f403ea3a6e71d46087aab5e14871b09bcb55955)
Documentation/licenses/COPYING.BSD-3-Clause: OK (sha256: 9b718a9460fed5952466421235bc79eb49d4e9eacc920d7a9dd6285ab8fd6c6d)
Documentation/licenses/COPYING.BSD-4-Clause-UC: OK (sha256: ba7640f00d93e72e92b94b9d71f25ec53bac2f1682f5c4adcccb0018359f60f8)
Documentation/licenses/COPYING.GPL-2.0-or-later: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
Documentation/licenses/COPYING.ISC: OK (sha256: e53348ce276358e9997014071c5294b36a18c4b34f32f00ee57b9acce0aafd63)
Documentation/licenses/COPYING.LGPL-2.1-or-later: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87)
>>> host-ncurses 6.1 Collecting legal info
COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87)
>>> pixman 0.40.0 Collecting legal info
COPYING: OK (sha256: fac9270f0987b96ff4533fca3548c633e02083cbba4a0172a3b149b2e4019793)
>>> cantarell 0.0.25 Collecting legal info
COPYING: OK (sha256: 79a9d6198c0d9192c1b0bf55bcbc404a39390bd0d8c650cf20d652c2eaa284d8)
>>> explorercanvas aa989ea9d9bac748638f7c66b0fc88e619715da6 Collecting legal info
COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> fbv 1.0b Collecting legal info
COPYING: OK (sha256: bf21d97bafcaacb5d6bc3d5502030c340f0e0593614078ab017af91e950083af)
>>> glorytun 0.3.4 Collecting legal info
LICENSE: OK (sha256: 3d9ddddb8807c305287d9dbab58473e5307e9c91651c43c654a0828855d2b373)
>>> libsodium 1.0.18 Collecting legal info
LICENSE: OK (sha256: dea1855c9809f3faf22aa4a1fba20ec8af5a5587f23115012e5b98279cedc4af)
>>> gmp 6.1.2 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-gnupg 1.4.23 Collecting legal info
COPYING: OK (sha256: fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7)
>>> google-material-design-icons 2.2.3 Collecting legal info
LICENSE: OK (sha256: 8ae9438818c26e4873b91d8c6ad620526c011e27e125677f13031eda903f007c)
>>> harfbuzz 2.6.4 Collecting legal info
COPYING: OK (sha256: 1b32b6e2fea50440c128c5ba482f7691367c46fd0cd573b80fc863bf07964cea)
>>> iodine 0.7.0 Collecting legal info
README: OK (sha256: f41a252b2218759aa351270b7ad9791bdd323836b940e35c0614837a5d24dcb7)
>>> libasplib be7fac89218a84b75f7598e3d76625ece99296f2 Collecting legal info
LICENSE: OK (sha256: 12ac5047f2af0522f06798b1589ffc4599bc29c91f954d7874e0320634e777c0)
>>> libdmtx 0.7.5 Collecting legal info
LICENSE: OK (sha256: fcc277b7302645322c63de22b9b0bdae2df3dfa7d6cbc0d5bed7a4d3f1a9af79)
>>> libdvdcss 1.4.2 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> libdvdread 6.1.1 Collecting legal info
COPYING: OK (sha256: d6cb0e9e560f51085556949a84af12b79a00f10ab8b66c752537faf7cd665572)
>>> libev 4.27 Collecting legal info
LICENSE: OK (sha256: c4dd1a5bc38b041a320b93c5d6c08f5c41a63f2ce718ee16cfcb757fad448199)
>>> libnl 3.5.0 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-bison 3.4.2 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-flex 2.6.4 Collecting legal info
COPYING: OK (sha256: 97fd685958d93be7f8dab939bb8161dbd6afb0718c63bfc337c24321aea44273)
>>> host-gettext  Collecting legal info
>>> host-gettext-tiny adaa9c64921e80f2b8dd3610ffb508618b9204f3 Collecting legal info
LICENSE: OK (sha256: b57aa4fdc1c614c28d41c1e2d5c4090935964c5f86291ba7d1c99ffd1d698b34)
extra/COPYING: OK (sha256: e79e9c8a0c85d735ff98185918ec94ed7d175efc377012787aebcf3b80f0d90b)
>>> libopenssl 1.1.1g Collecting legal info
LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c)
>>> libpcap 1.9.1 Collecting legal info
LICENSE: OK (sha256: 8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd)
>>> libsidplay2 2.1.1 Collecting legal info
libsidplay/COPYING: OK (sha256: b8a2f73f743dc1a51aff23f1aacbca4b868564db52496fa3c0caba755bfd1eaf)
>>> libstrophe 0.9.3 Collecting legal info
MIT-LICENSE.txt: OK (sha256: 82476f36ffd5e895a176013c0812166ba7b7d99f3d536fc7f5ed2e33e9f74a08)
GPL-LICENSE.txt: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> openssl  Collecting legal info
>>> libtasn1 4.16.0 Collecting legal info
LICENSE: OK (sha256: 7446831f659f7ebfd8d497acc7f05dfa8e31c6cb6ba1b45df33d4895ab80f5a6)
doc/COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
doc/COPYING.LESSER: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> linuxconsoletools 1.7.0 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> msgpack 3.2.1 Collecting legal info
COPYING: OK (sha256: 664550b43996452a5a2c7471bb0ff77185a58c69ccafa60f983dc4c162e1ee22)
LICENSE_1_0.txt: OK (sha256: c9bff75738922193e67fa726fa225535870d2aa1059f91452c411736284ad566)
>>> host-mxsldr 2793a657ab7a22487d21c1b020957806f8ae8383 Collecting legal info
WARNING: no hash file for COPYING
>>> host-libusb 1.0.23 Collecting legal info
COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a)
>>> nettle 3.5.1 Collecting legal info
COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c)
COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> omniorb 4.2.4 Collecting legal info
COPYING: OK (sha256: 126647a6ee062fe46f8f3766965dc62e031c0a31238a347e4bc07aab2ac1e2a7)
COPYING.LIB: OK (sha256: eaf5b13ffd5355da7c0b83074e4b798152ff7086c95c4f3045122a06e2673eb9)
>>> host-omniorb 4.2.4 Collecting legal info
COPYING: OK (sha256: 126647a6ee062fe46f8f3766965dc62e031c0a31238a347e4bc07aab2ac1e2a7)
COPYING.LIB: OK (sha256: eaf5b13ffd5355da7c0b83074e4b798152ff7086c95c4f3045122a06e2673eb9)
>>> host-python 2.7.18 Collecting legal info
LICENSE: OK (sha256: de4d1f2d2ad5ad0cfd1657a106476b31cb5db5ef9d1ff842b237c0c81f0c8a23)
>>> host-expat 2.2.9 Collecting legal info
COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76)
>>> host-patchelf 0.9 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
>>> host-rauc 1.3 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libglib2 2.64.2 Collecting legal info
COPYING: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-libffi 3.3 Collecting legal info
LICENSE: OK (sha256: deaf3a42effb551a5b140fa9afefed183a27f1341c6d1bf430d106a5e6931fc0)
>>> host-meson 0.54.2 Collecting legal info
COPYING: OK (sha256: cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30)
>>> host-ninja 1.10.0 Collecting legal info
COPYING: OK (sha256: eb7e9ab9690124c5c9f42bdc81383d886a3dede26345b6ed15bbad7caf81f7ea)
>>> host-python3 3.8.5 Collecting legal info
LICENSE: OK (sha256: de4d1f2d2ad5ad0cfd1657a106476b31cb5db5ef9d1ff842b237c0c81f0c8a23)
>>> host-python3-setuptools 44.0.0 Collecting legal info
LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a)
>>> host-pcre 8.44 Collecting legal info
LICENCE: OK (sha256: 0dd9c13864dbb9ee4d77a1557e96be29b2d719fb6584192ee36611aae264c4a3)
>>> host-openssl  Collecting legal info
>>> host-libopenssl 1.1.1g Collecting legal info
LICENSE: OK (sha256: c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c)
>>> host-squashfs 4.4 Collecting legal info
COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-lz4 1.9.2 Collecting legal info
lib/LICENSE: OK (sha256: d15d99c8dc6b0ec22174c0e563a95bc40f9363ca7f9d9d793bb5c5a8e8d0af71)
programs/COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
>>> host-xz 5.2.4 Collecting legal info
COPYING: OK (sha256: bcb02973ef6e87ea73d331b3a80df7748407f17efdb784b61b47e0e610d3bb5c)
COPYING.GPLv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643)
COPYING.GPLv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
COPYING.LGPLv2.1: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551)
>>> host-zstd 1.4.5 Collecting legal info
LICENSE: OK (sha256: 2c1a7fa704df8f3a606f6fc010b8b5aaebf403f3aeec339a12048f1ba7331a0b)
COPYING: OK (sha256: f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505)
>>> rtmpdump c5f04a58fc2aeea6296ca7c44ee4734c18401aa3 Collecting legal info
librtmp/COPYING: OK (sha256: 03fe7ca91cc28e99b4003d5b3bd4ce3b084d4c475fdf9975cf0e7fdf4dc739cd)
>>> host-sam-ba 2.18 Collecting legal info
doc/license.txt: OK (sha256: f9cac240acadbfd8f4f1c0d65132f85427384697bd6337da6444c531138d56ee)
tcl_lib/boards.tcl: OK (sha256: 255564ff8953ea95c11a4ab1d56f1edf332298faad209ca80daf745c7ed95124)
applets/sam4c/libraries/libchip_sam4c/include/sam4c/sam4c32e-1.h: OK (sha256: 74ae62858139cb4e18acc3448483be80ea6b36fdb87260b665f43762ca354ede)
>>> sp-oops-extract 0.0.7-1 Collecting legal info
COPYING: OK (sha256: c38aee9e3c8c4d5d594ff548a1be05453023016d6286931f6512db215ec1fd42)
>>> tcpdump 4.9.3 Collecting legal info
LICENSE: OK (sha256: 9b03d5d13e66d6de02a4bb2d0dd1cb9f41808d045962cdcc42350d5291b141a1)
>>> ti-utils 06dbdb2727354b5f3ad7c723897f40051fddee49 Collecting legal info
COPYING: OK (sha256: 363cef40b276a7a91ebcff3f78626d9cfe5e5a51927c725236007259403d5fc4)
>>> tunctl 1.5 Collecting legal info
tunctl.c: OK (sha256: bcd12b6749dbd86c051cc2ef9e838096741602d4db213cc866b1da6cfeda5f16)
>>> twolame 0.4.0 Collecting legal info
COPYING: OK (sha256: 257a842724705950b07da76ce0e22ffa80ec77b3e9dfc6702522ac342409da0f)
>>> host-utp_com dee512ced1e9367d223d22f10797fbf9aeacfab6 Collecting legal info
LICENSE: OK (sha256: a45d0bb572ed792ed34627a72621834b3ba92aab6e2cc4e04301dee7a728d753)
>>> host-sg3_utils 1.45 Collecting legal info
COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc)
BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a)
>>> wavemon 0.9.1 Collecting legal info
COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903)
WARNING: the Buildroot source code has not been saved
WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined)
Legal info produced in /nvme/rc-buildroot-test/scripts/instance-1/output-1/legal-info
make: Leaving directory '/nvme/rc-buildroot-test/scripts/instance-1/buildroot'