make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin/sgp_dd make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/share/man/man8' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/bin' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' >>> sg3_utils 1.45 Fixing libtool files for la in $(find /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/tmp/instance-1/output-1:@BASE_DIR@:g" \ -e "s:/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot:@STAGING_DIR@:g" \ \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:\(['= ]\)/lib:\\1@STAGING_DIR@/lib:g" \ \ -e "s:@STAGING_DIR@:/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot:g" \ -e "s:@BASE_DIR@:/tmp/instance-1/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sg3_utils 1.45 Installing to target PATH="/tmp/instance-1/output-1/host/bin:/tmp/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j32 DESTDIR=/tmp/instance-1/output-1/target install -C /tmp/instance-1/output-1/build/sg3_utils-1.45/ make[1]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' Making install in include make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/include' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/include' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/tmp/instance-1/output-1/target/usr/include/scsi' /usr/bin/install -c -m 644 sg_lib.h sg_lib_data.h sg_cmds.h sg_cmds_basic.h sg_cmds_extra.h sg_cmds_mmc.h sg_pr2serr.h sg_unaligned.h sg_pt.h sg_pt_nvme.h sg_linux_inc.h sg_io_linux.h sg_pt_linux.h '/tmp/instance-1/output-1/target/usr/include/scsi' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/include' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/include' Making install in lib make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/tmp/instance-1/output-1/target/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libsgutils2.la '/tmp/instance-1/output-1/target/usr/lib' libtool: install: /usr/bin/install -c .libs/libsgutils2-1.45.so.2.0.0 /tmp/instance-1/output-1/target/usr/lib/libsgutils2-1.45.so.2.0.0 libtool: install: (cd /tmp/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2 || { rm -f libsgutils2-1.45.so.2 && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2-1.45.so.2; }; }) libtool: install: (cd /tmp/instance-1/output-1/target/usr/lib && { ln -s -f libsgutils2-1.45.so.2.0.0 libsgutils2.so || { rm -f libsgutils2.so && ln -s libsgutils2-1.45.so.2.0.0 libsgutils2.so; }; }) libtool: install: /usr/bin/install -c .libs/libsgutils2.lai /tmp/instance-1/output-1/target/usr/lib/libsgutils2.la libtool: warning: remember to run 'libtool --finish /usr/lib' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/lib' Making install in src make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/tmp/instance-1/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sg_bg_ctl sg_compare_and_write sg_decode_sense sg_format sg_get_config sg_get_elem_status sg_get_lba_status sg_ident sg_inq sg_logs sg_luns sg_modes sg_opcodes sg_persist sg_prevent sg_raw sg_rdac sg_read_attr sg_read_block_limits sg_read_buffer sg_read_long sg_readcap sg_reassign sg_referrals sg_rep_zones sg_requests sg_reset_wp sg_rmsn sg_rtpg sg_safte sg_sanitize sg_sat_identify sg_sat_phy_event sg_sat_read_gplog sg_sat_set_features sg_seek sg_senddiag sg_ses sg_ses_microcode sg_start sg_stpg sg_stream_ctl sg_sync sg_timestamp sg_turs sg_unmap sg_verify sg_vpd sg_wr_mode sg_write_buffer sg_write_long sg_write_same sg_write_verify sg_write_x sg_zone sg_copy_results sg_dd sg_emc_trespass sg_map sg_map26 sg_rbuf sg_read sg_reset sg_scan sg_test_rwbuf sg_xcopy sginfo sgm_dd sgp_dd '/tmp/instance-1/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sg_bg_ctl /tmp/instance-1/output-1/target/usr/bin/sg_bg_ctl libtool: install: /usr/bin/install -c sg_compare_and_write /tmp/instance-1/output-1/target/usr/bin/sg_compare_and_write libtool: install: /usr/bin/install -c sg_decode_sense /tmp/instance-1/output-1/target/usr/bin/sg_decode_sense libtool: install: /usr/bin/install -c sg_format /tmp/instance-1/output-1/target/usr/bin/sg_format libtool: install: /usr/bin/install -c sg_get_config /tmp/instance-1/output-1/target/usr/bin/sg_get_config libtool: install: /usr/bin/install -c sg_get_elem_status /tmp/instance-1/output-1/target/usr/bin/sg_get_elem_status libtool: install: /usr/bin/install -c sg_get_lba_status /tmp/instance-1/output-1/target/usr/bin/sg_get_lba_status libtool: install: /usr/bin/install -c sg_ident /tmp/instance-1/output-1/target/usr/bin/sg_ident libtool: install: /usr/bin/install -c sg_inq /tmp/instance-1/output-1/target/usr/bin/sg_inq libtool: install: /usr/bin/install -c sg_logs /tmp/instance-1/output-1/target/usr/bin/sg_logs libtool: install: /usr/bin/install -c sg_luns /tmp/instance-1/output-1/target/usr/bin/sg_luns libtool: install: /usr/bin/install -c sg_modes /tmp/instance-1/output-1/target/usr/bin/sg_modes libtool: install: /usr/bin/install -c sg_opcodes /tmp/instance-1/output-1/target/usr/bin/sg_opcodes libtool: install: /usr/bin/install -c sg_persist /tmp/instance-1/output-1/target/usr/bin/sg_persist libtool: install: /usr/bin/install -c sg_prevent /tmp/instance-1/output-1/target/usr/bin/sg_prevent libtool: install: /usr/bin/install -c sg_raw /tmp/instance-1/output-1/target/usr/bin/sg_raw libtool: install: /usr/bin/install -c sg_rdac /tmp/instance-1/output-1/target/usr/bin/sg_rdac libtool: install: /usr/bin/install -c sg_read_attr /tmp/instance-1/output-1/target/usr/bin/sg_read_attr libtool: install: /usr/bin/install -c sg_read_block_limits /tmp/instance-1/output-1/target/usr/bin/sg_read_block_limits libtool: install: /usr/bin/install -c sg_read_buffer /tmp/instance-1/output-1/target/usr/bin/sg_read_buffer libtool: install: /usr/bin/install -c sg_read_long /tmp/instance-1/output-1/target/usr/bin/sg_read_long libtool: install: /usr/bin/install -c sg_readcap /tmp/instance-1/output-1/target/usr/bin/sg_readcap libtool: install: /usr/bin/install -c sg_reassign /tmp/instance-1/output-1/target/usr/bin/sg_reassign libtool: install: /usr/bin/install -c sg_referrals /tmp/instance-1/output-1/target/usr/bin/sg_referrals libtool: install: /usr/bin/install -c sg_rep_zones /tmp/instance-1/output-1/target/usr/bin/sg_rep_zones libtool: install: /usr/bin/install -c sg_requests /tmp/instance-1/output-1/target/usr/bin/sg_requests libtool: install: /usr/bin/install -c sg_reset_wp /tmp/instance-1/output-1/target/usr/bin/sg_reset_wp libtool: install: /usr/bin/install -c sg_rmsn /tmp/instance-1/output-1/target/usr/bin/sg_rmsn libtool: install: /usr/bin/install -c sg_rtpg /tmp/instance-1/output-1/target/usr/bin/sg_rtpg libtool: install: /usr/bin/install -c sg_safte /tmp/instance-1/output-1/target/usr/bin/sg_safte libtool: install: /usr/bin/install -c sg_sanitize /tmp/instance-1/output-1/target/usr/bin/sg_sanitize libtool: install: /usr/bin/install -c sg_sat_identify /tmp/instance-1/output-1/target/usr/bin/sg_sat_identify libtool: install: /usr/bin/install -c sg_sat_phy_event /tmp/instance-1/output-1/target/usr/bin/sg_sat_phy_event libtool: install: /usr/bin/install -c sg_sat_read_gplog /tmp/instance-1/output-1/target/usr/bin/sg_sat_read_gplog libtool: install: /usr/bin/install -c sg_sat_set_features /tmp/instance-1/output-1/target/usr/bin/sg_sat_set_features libtool: install: /usr/bin/install -c sg_seek /tmp/instance-1/output-1/target/usr/bin/sg_seek libtool: install: /usr/bin/install -c sg_senddiag /tmp/instance-1/output-1/target/usr/bin/sg_senddiag libtool: install: /usr/bin/install -c sg_ses /tmp/instance-1/output-1/target/usr/bin/sg_ses libtool: install: /usr/bin/install -c sg_ses_microcode /tmp/instance-1/output-1/target/usr/bin/sg_ses_microcode libtool: install: /usr/bin/install -c sg_start /tmp/instance-1/output-1/target/usr/bin/sg_start libtool: install: /usr/bin/install -c sg_stpg /tmp/instance-1/output-1/target/usr/bin/sg_stpg libtool: install: /usr/bin/install -c sg_stream_ctl /tmp/instance-1/output-1/target/usr/bin/sg_stream_ctl libtool: install: /usr/bin/install -c sg_sync /tmp/instance-1/output-1/target/usr/bin/sg_sync libtool: install: /usr/bin/install -c sg_timestamp /tmp/instance-1/output-1/target/usr/bin/sg_timestamp libtool: install: /usr/bin/install -c sg_turs /tmp/instance-1/output-1/target/usr/bin/sg_turs libtool: install: /usr/bin/install -c sg_unmap /tmp/instance-1/output-1/target/usr/bin/sg_unmap libtool: install: /usr/bin/install -c sg_verify /tmp/instance-1/output-1/target/usr/bin/sg_verify libtool: install: /usr/bin/install -c sg_vpd /tmp/instance-1/output-1/target/usr/bin/sg_vpd libtool: install: /usr/bin/install -c sg_wr_mode /tmp/instance-1/output-1/target/usr/bin/sg_wr_mode libtool: install: /usr/bin/install -c sg_write_buffer /tmp/instance-1/output-1/target/usr/bin/sg_write_buffer libtool: install: /usr/bin/install -c sg_write_long /tmp/instance-1/output-1/target/usr/bin/sg_write_long libtool: install: /usr/bin/install -c sg_write_same /tmp/instance-1/output-1/target/usr/bin/sg_write_same libtool: install: /usr/bin/install -c sg_write_verify /tmp/instance-1/output-1/target/usr/bin/sg_write_verify libtool: install: /usr/bin/install -c sg_write_x /tmp/instance-1/output-1/target/usr/bin/sg_write_x libtool: install: /usr/bin/install -c sg_zone /tmp/instance-1/output-1/target/usr/bin/sg_zone libtool: install: /usr/bin/install -c sg_copy_results /tmp/instance-1/output-1/target/usr/bin/sg_copy_results libtool: install: /usr/bin/install -c sg_dd /tmp/instance-1/output-1/target/usr/bin/sg_dd libtool: install: /usr/bin/install -c sg_emc_trespass /tmp/instance-1/output-1/target/usr/bin/sg_emc_trespass libtool: install: /usr/bin/install -c sg_map /tmp/instance-1/output-1/target/usr/bin/sg_map libtool: install: /usr/bin/install -c sg_map26 /tmp/instance-1/output-1/target/usr/bin/sg_map26 libtool: install: /usr/bin/install -c sg_rbuf /tmp/instance-1/output-1/target/usr/bin/sg_rbuf libtool: install: /usr/bin/install -c sg_read /tmp/instance-1/output-1/target/usr/bin/sg_read libtool: install: /usr/bin/install -c sg_reset /tmp/instance-1/output-1/target/usr/bin/sg_reset libtool: install: /usr/bin/install -c sg_scan /tmp/instance-1/output-1/target/usr/bin/sg_scan libtool: install: /usr/bin/install -c sg_test_rwbuf /tmp/instance-1/output-1/target/usr/bin/sg_test_rwbuf libtool: install: /usr/bin/install -c sg_xcopy /tmp/instance-1/output-1/target/usr/bin/sg_xcopy libtool: install: /usr/bin/install -c sginfo /tmp/instance-1/output-1/target/usr/bin/sginfo libtool: install: /usr/bin/install -c sgm_dd /tmp/instance-1/output-1/target/usr/bin/sgm_dd libtool: install: /usr/bin/install -c sgp_dd /tmp/instance-1/output-1/target/usr/bin/sgp_dd make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/src' Making install in doc make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/tmp/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 scsi_mandat.8 scsi_readcap.8 scsi_ready.8 scsi_satl.8 scsi_start.8 scsi_stop.8 scsi_temperature.8 sg3_utils.8 sg_bg_ctl.8 sg_compare_and_write.8 sg_decode_sense.8 sg_format.8 sg_get_config.8 sg_get_elem_status.8 sg_get_lba_status.8 sg_ident.8 sg_inq.8 sg_logs.8 sg_luns.8 sg_modes.8 sg_opcodes.8 sg_persist.8 sg_prevent.8 sg_raw.8 sg_rdac.8 sg_read_attr.8 sg_read_block_limits.8 sg_read_buffer.8 sg_read_long.8 sg_readcap.8 sg_reassign.8 sg_referrals.8 sg_rep_zones.8 sg_requests.8 sg_reset_wp.8 sg_rmsn.8 sg_rtpg.8 sg_safte.8 sg_sanitize.8 sg_sat_identify.8 '/tmp/instance-1/output-1/target/usr/share/man/man8' /usr/bin/install -c -m 644 sg_sat_phy_event.8 sg_sat_read_gplog.8 sg_sat_set_features.8 sg_seek.8 sg_senddiag.8 sg_ses.8 sg_ses_microcode.8 sg_start.8 sg_stpg.8 sg_stream_ctl.8 sg_sync.8 sg_timestamp.8 sg_turs.8 sg_unmap.8 sg_verify.8 sg_vpd.8 sg_wr_mode.8 sg_write_buffer.8 sg_write_long.8 sg_write_same.8 sg_write_verify.8 sg_write_x.8 sg_zone.8 rescan-scsi-bus.sh.8 scsi_logging_level.8 sg_copy_results.8 sg_dd.8 sg_emc_trespass.8 sg_map.8 sg_map26.8 sg_rbuf.8 sg_read.8 sg_reset.8 sg_scan.8 sg_test_rwbuf.8 sg_xcopy.8 sginfo.8 sgm_dd.8 sgp_dd.8 '/tmp/instance-1/output-1/target/usr/share/man/man8' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/doc' Making install in scripts make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/tmp/instance-1/output-1/target/usr/bin' /usr/bin/install -c scsi_logging_level scsi_mandat scsi_readcap scsi_ready scsi_satl scsi_start scsi_stop scsi_temperature rescan-scsi-bus.sh '/tmp/instance-1/output-1/target/usr/bin' make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45/scripts' make[2]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[3]: Entering directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[2]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' make[1]: Leaving directory '/tmp/instance-1/output-1/build/sg3_utils-1.45' for prog in compare_and_write copy_results dd decode_sense emc_trespass format get_config get_lba_status ident inq logs luns map26 map sgm_dd modes opcodes sgp_dd persist prevent raw rbuf rdac read readcap read_block_limits read_attr read_buffer read_long reassign referrals rep_zones requests reset reset_wp rmsn rtpg safte sanitize sat_identify sat_phy_event sat_read_gplog sat_set_features scan senddiag ses ses_microcode start stpg sync test_rwbuf timestamp turs unmap verify vpd write_buffer write_long write_same write_verify wr_mode xcopy zone; do rm -f /tmp/instance-1/output-1/target/usr/bin/sg_${prog} ; done for prog in logging_level mandat readcap ready satl start stop temperature; do rm -f /tmp/instance-1/output-1/target/usr/bin/scsi_${prog} ; done for prog in sginfo sgm_dd sgp_dd; do rm -f /tmp/instance-1/output-1/target/usr/bin/${prog}; done wipe-2.3.1.tar.bz2: OK (sha256: 463916370f9b35bb34419c2c0ae3dc4c0a471db32e8595afa1d14c0337b61aa0) >>> wipe 2.3.1 Extracting bzcat /tmp/instance-1/dl/wipe/wipe-2.3.1.tar.bz2 | tar --strip-components=1 -C /tmp/instance-1/output-1/build/wipe-2.3.1 -xf - >>> wipe 2.3.1 Patching Applying 0001-musl.patch using patch: patching file rand.h >>> wipe 2.3.1 Updating config.sub and config.guess for file in config.guess config.sub; do for i in $(find /tmp/instance-1/output-1/build/wipe-2.3.1 -name $file); do cp support/gnuconfig/$file $i; done; done >>> wipe 2.3.1 Patching libtool >>> wipe 2.3.1 Configuring (cd /tmp/instance-1/output-1/build/wipe-2.3.1/ && rm -rf config.cache && PATH="/tmp/instance-1/output-1/host/bin:/tmp/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" AR="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-ar" AS="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-as" LD="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-ld" NM="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-nm" CC="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc" GCC="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc" CPP="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-cpp" CXX="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-g++" FC="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gfortran" F77="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gfortran" RANLIB="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-ranlib" READELF="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-readelf" STRIP="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-strip" OBJCOPY="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-objcopy" OBJDUMP="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-objdump" AR_FOR_BUILD="/usr/bin/ar" AS_FOR_BUILD="/usr/bin/as" CC_FOR_BUILD="/usr/bin/gcc" GCC_FOR_BUILD="/usr/bin/gcc" CXX_FOR_BUILD="/usr/bin/g++" LD_FOR_BUILD="/usr/bin/ld" CPPFLAGS_FOR_BUILD="-I/tmp/instance-1/output-1/host/include" CFLAGS_FOR_BUILD="-O2 -I/tmp/instance-1/output-1/host/include" CXXFLAGS_FOR_BUILD="-O2 -I/tmp/instance-1/output-1/host/include" LDFLAGS_FOR_BUILD="-L/tmp/instance-1/output-1/host/lib -Wl,-rpath,/tmp/instance-1/output-1/host/lib" FCFLAGS_FOR_BUILD="" DEFAULT_ASSEMBLER="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-as" DEFAULT_LINKER="/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-ld" CPPFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" CFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " CXXFLAGS="-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 " LDFLAGS="" FCFLAGS=" -Os -g0" FFLAGS=" -Os -g0" PKG_CONFIG="/tmp/instance-1/output-1/host/bin/pkg-config" STAGING_DIR="/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot" INTLTOOL_PERL=/usr/bin/perl CXX=no ac_cv_lbl_unaligned_fail=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_memcmp_working=yes ac_cv_have_decl_malloc=yes gl_cv_func_malloc_0_nonnull=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_calloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes lt_cv_sys_lib_search_path_spec="" ac_cv_c_bigendian=no CONFIG_SITE=/dev/null ./configure --target=microblazeel-buildroot-linux-uclibc --host=microblazeel-buildroot-linux-uclibc --build=x86_64-pc-linux-gnu --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --localstatedir=/var --program-prefix="" --disable-gtk-doc --disable-gtk-doc-html --disable-doc --disable-docs --disable-documentation --with-xmlto=no --with-fop=no --disable-dependency-tracking --enable-ipv6 --disable-nls --disable-static --enable-shared ) loading site script /dev/null creating cache ./config.cache checking host system type... microblazeel-buildroot-linux-uclibc checking target system type... microblazeel-buildroot-linux-uclibc checking build system type... x86_64-pc-linux-gnu checking for gcc... /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc checking whether the C compiler (/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ) works... yes checking whether the C compiler (/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 ) is a cross-compiler... yes checking whether we are using GNU C... yes checking whether /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc accepts -g... yes checking for POSIXized ISC... no checking how to run the C preprocessor... /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-cpp checking whether /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc needs -traditional... no checking for a BSD compatible install... /usr/bin/install -c checking whether the C compiler accepts -pipe... yes checking whether the C compiler accepts -g... yes checking whether the C compiler accepts -O0... yes checking whether the C compiler accepts -O2... yes checking whether the C compiler accepts -ansi... yes checking whether the C compiler accepts -pedantic... yes checking whether the C compiler accepts -Wall... yes checking whether the C compiler accepts -Werror... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for ANSI C header files... yes checking for unistd.h... yes checking for stdint.h... yes checking for fcntl.h... yes checking for memory.h... yes checking for linux/fs.h... yes checking for sys/mount.h... yes checking for sys/disklabel.h... no checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/stat.h... yes checking for sys/time.h... yes checking for sys/types.h... yes checking for getopt.h... yes checking for errno.h... yes checking for termio.h... yes checking for termios.h... yes checking for linux/mtio.h... yes checking for working const... yes checking for inline... __inline__ checking for off_t... yes checking for size_t... yes checking whether stat file-mode macros are broken... no checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... (cached) yes checking for getopt... yes checking for strnlen... yes checking for bzero... yes checking for memset... yes checking for memcpy... yes checking for realloc... yes checking for fchmod... yes checking for ioctl... yes checking for fcntl... yes checking for lockf... yes checking for flock... yes checking for fsync... yes checking for fdatasync... yes checking for unlink... yes checking for rmdir... yes checking for remove... yes checking for rename... yes checking for dirfd... yes updating cache ./config.cache creating ./config.status creating Makefile creating config.h >>> wipe 2.3.1 Building PATH="/tmp/instance-1/output-1/host/bin:/tmp/instance-1/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" /usr/bin/make -j32 -C /tmp/instance-1/output-1/build/wipe-2.3.1/ make[1]: Entering directory '/tmp/instance-1/output-1/build/wipe-2.3.1' /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o main.o main.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o wipe.o wipe.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o rand.o rand.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o dir.o dir.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o file.o file.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o blkdev.o blkdev.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o lock.o lock.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o text.o text.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o str.o str.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o percent.o percent.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o prompt.o prompt.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o io.o io.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc -pipe -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -DLINUX -c -o mt.o mt.c /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-gcc *.o -o wipe make[1]: Leaving directory '/tmp/instance-1/output-1/build/wipe-2.3.1' >>> wipe 2.3.1 Installing to target /usr/bin/install -D -m 0755 /tmp/instance-1/output-1/build/wipe-2.3.1/wipe /tmp/instance-1/output-1/target/usr/bin/wipe >>> Finalizing host directory >>> Finalizing target directory mkdir -p /tmp/instance-1/output-1/host/etc/meson sed -e 's%@TARGET_CROSS@%/tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-%g' -e 's%@TARGET_ARCH@%microblaze%g' -e 's%@TARGET_CPU@%%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os', '-g0'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/tmp/instance-1/output-1/host%g' -e 's%@STAGING_DIR@%/tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /tmp/instance-1/output-1/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /tmp/instance-1/output-1/host/etc/meson/cross-compilation.conf.in > /tmp/instance-1/output-1/host/etc/meson/cross-compilation.conf /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /tmp/instance-1/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /tmp/instance-1/output-1/target/etc/inittab if grep -q CONFIG_ASH=y /tmp/instance-1/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/ash$' /tmp/instance-1/output-1/target/etc/shells || echo "/bin/ash" >> /tmp/instance-1/output-1/target/etc/shells; fi if grep -q CONFIG_HUSH=y /tmp/instance-1/output-1/build/busybox-1.33.1/.config; then grep -qsE '^/bin/hush$' /tmp/instance-1/output-1/target/etc/shells || echo "/bin/hush" >> /tmp/instance-1/output-1/target/etc/shells; fi mkdir -p /tmp/instance-1/output-1/target/etc echo "buildroot" > /tmp/instance-1/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /tmp/instance-1/output-1/target/etc/hosts mkdir -p /tmp/instance-1/output-1/target/etc echo "Welcome to Buildroot" > /tmp/instance-1/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /tmp/instance-1/output-1/target/etc/shadow rm -f /tmp/instance-1/output-1/target/bin/sh if [ -x /tmp/instance-1/output-1/target/sbin/swapon -a -x /tmp/instance-1/output-1/target/sbin/swapoff ]; then /bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /tmp/instance-1/output-1/target/etc/inittab; else /bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /tmp/instance-1/output-1/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /tmp/instance-1/output-1/build/locales.nopurge for dir in /tmp/instance-1/output-1/target/usr/share/locale /tmp/instance-1/output-1/target/usr/share/X11/locale /tmp/instance-1/output-1/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /tmp/instance-1/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /tmp/instance-1/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /tmp/instance-1/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /tmp/instance-1/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /tmp/instance-1/output-1/target/usr/include /tmp/instance-1/output-1/target/usr/share/aclocal \ /tmp/instance-1/output-1/target/usr/lib/pkgconfig /tmp/instance-1/output-1/target/usr/share/pkgconfig \ /tmp/instance-1/output-1/target/usr/lib/cmake /tmp/instance-1/output-1/target/usr/share/cmake \ /tmp/instance-1/output-1/target/usr/doc find /tmp/instance-1/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /tmp/instance-1/output-1/target/lib/ /tmp/instance-1/output-1/target/usr/lib/ /tmp/instance-1/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /tmp/instance-1/output-1/target/usr/share/gdb rm -rf /tmp/instance-1/output-1/target/usr/share/bash-completion rm -rf /tmp/instance-1/output-1/target/etc/bash_completion.d rm -rf /tmp/instance-1/output-1/target/usr/share/zsh rm -rf /tmp/instance-1/output-1/target/usr/man /tmp/instance-1/output-1/target/usr/share/man rm -rf /tmp/instance-1/output-1/target/usr/info /tmp/instance-1/output-1/target/usr/share/info rm -rf /tmp/instance-1/output-1/target/usr/doc /tmp/instance-1/output-1/target/usr/share/doc rm -rf /tmp/instance-1/output-1/target/usr/share/gtk-doc rmdir /tmp/instance-1/output-1/target/usr/share 2>/dev/null || true rm -rf /tmp/instance-1/output-1/target/lib/debug /tmp/instance-1/output-1/target/usr/lib/debug find /tmp/instance-1/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /tmp/instance-1/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /tmp/instance-1/output-1/host/bin/microblazeel-buildroot-linux-uclibc-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /tmp/instance-1/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /tmp/instance-1/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /tmp/instance-1/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2021.05-393-gb928074e2d"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.08-git"; \ echo "PRETTY_NAME=\"Buildroot 2021.08-git\"" \ ) > /tmp/instance-1/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /tmp/instance-1/output-1/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/tmp/instance-1/output-1/per-package /tmp/instance-1/buildroot/support/scripts/fix-rpath target touch /tmp/instance-1/output-1/target/usr ln -snf /tmp/instance-1/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot /tmp/instance-1/output-1/staging make: Leaving directory '/tmp/instance-1/buildroot' make: Entering directory '/tmp/instance-1/buildroot' >>> Buildroot 2021.05-393-gb928074e2d Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-buildroot Collecting legal info >>> host-gcc-final 10.3.0 Collecting legal info >>> host-binutils 2.35.2 Collecting legal info COPYING3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.LIB: OK (sha256: 56bdea73b6145ef6ac5259b3da390b981d840c24cb03b8e1cbc678de7ecfa18d) >>> host-skeleton Collecting legal info >>> host-gmp 6.2.1 Collecting legal info COPYING.LESSERv3: OK (sha256: a853c2ffec17057872340eee242ae4d96cbf2b520ae27d903e1b2fef1a5f9d1c) COPYINGv2: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-mpc 1.2.1 Collecting legal info COPYING.LESSER: OK (sha256: da7eabb7bafdf7d3ae5e9f223aa5bdc1eece45ac569dc21b3b037520b4464768) >>> host-mpfr 4.1.0 Collecting legal info COPYING.LESSER: OK (sha256: e3a994d82e644b03a792a930f574002658412f62407f5fee083f2555c5f23118) >>> uclibc 1.0.38 Collecting legal info COPYING.LIB: OK (sha256: 6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3) >>> host-gcc-initial 10.3.0 Collecting legal info >>> linux-headers 5.13 Collecting legal info COPYING: OK (sha256: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0) LICENSES/preferred/GPL-2.0: OK (sha256: f6b78c087c3ebdf0f3c13415070dd480a3f35d8fc76f3d02180a407c1c812f79) LICENSES/exceptions/Linux-syscall-note: OK (sha256: 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain Collecting legal info >>> aespipe 2.4f Collecting legal info >>> aoetools 37 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> busybox 1.33.1 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) archival/libarchive/bz/LICENSE: OK (sha256: b5a136ed67798e51fe2e0ca0b2a21cb01b904ff0c9f7d563a6292e276607e58f) >>> initscripts Collecting legal info >>> libcap 2.49 Collecting legal info License: OK (sha256: f58c80bcce8c929db39a23c32e924876e3311f3ffa54f66076c38056d38fa59b) >>> host-gperf 3.1 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-libcap 2.49 Collecting legal info License: OK (sha256: f58c80bcce8c929db39a23c32e924876e3311f3ffa54f66076c38056d38fa59b) >>> libkrb5 1.18.3 Collecting legal info NOTICE: OK (sha256: b7a5f14a8719bce5e49a761998aa55438fc890fb40f71228d6a49546f6d5690d) >>> host-bison 3.7.6 Collecting legal info COPYING: OK (sha256: 3972dc9744f6499f0f9b2dbf76696f2ae7ad8af9b23dde66d6af86c9dfb36986) >>> libucl 0.8.1 Collecting legal info COPYING: OK (sha256: 1bf976835764c1d827e07472a0a75adb098682df56681878af05fc0db7439b03) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> host-pkgconf 1.6.3 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> libxcrypt 4.4.18 Collecting legal info LICENSING: OK (sha256: f8198fcc4f002bf54512bac2e68e1e3f04af7d105f4f4f98d7d22cb110e04715) COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> lzo 2.10 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> mdevd 0.1.4.0 Collecting legal info COPYING: OK (sha256: 31b60c66aba1fa0a7f8847339ac35c28638e25ff96da700d995533ad810e3995) >>> skalibs 2.10.0.3 Collecting legal info COPYING: OK (sha256: adecb8bedfaae27fcfe65ecb3ef0e2e71aa2a2b49dc21886a200bc677d93e6ec) >>> musl-fts 1.2.7 Collecting legal info COPYING: OK (sha256: 55af87e4017668f54467a3380e7ebbac5e672d8c763bfe95e6fc882a6fdc4046) >>> ncdu 1.15.1 Collecting legal info COPYING: OK (sha256: 978f49428f21714c973706030c0ef09983cc1e2889a1b7b521dbf8860870cf05) >>> ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-ncurses 6.1 Collecting legal info COPYING: OK (sha256: 4d1fde61868c73776a539366dccf5d5a4857e7fd7299efb1f02e07c2afe9ea87) >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-sam-ba 3.3.1 Collecting legal info LICENSE.txt: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) >>> sg3_utils 1.45 Collecting legal info COPYING: OK (sha256: d516b8b337a77e3d4c65dffe708ca7fb25b1cb4ec77ec362cf11ed659b9250bc) BSD_LICENSE: OK (sha256: 8ddd1d82f2be2f5cbd5b5c3b5c2ee94a90d2ca7112958448da74dd78384fd96a) >>> wipe 2.3.1 Collecting legal info LICENSE: OK (sha256: 890cd89006bb57ce95b460e867c7bcc81d30cbc23067a9be4644bdac6882bc14) WARNING: the Buildroot source code has not been saved WARNING: gcc-final-10.3.0: cannot save license (HOST_GCC_FINAL_LICENSE_FILES not defined) WARNING: gcc-initial-10.3.0: cannot save license (HOST_GCC_INITIAL_LICENSE_FILES not defined) WARNING: aespipe-2.4f: cannot save license (AESPIPE_LICENSE_FILES not defined) Legal info produced in /tmp/instance-1/output-1/legal-info make: Leaving directory '/tmp/instance-1/buildroot'