installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing qcam.conf in /etc/sane.d/qcam.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c scanimage '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c saned '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/sbin' libtool: install: /usr/bin/install -c scanimage /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/scanimage libtool: install: /usr/bin/install -c saned /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/sbin/saned make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/pkgconfig' libtool: install: /usr/bin/install -c sane-find-scanner /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/bin/umax_pp make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' >>> sane-backends 1.0.27 Fixing package configuration files >>> sane-backends 1.0.27 Fixing libtool files for la in $(find /home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib* -name "*.la"); do \ cp -a "${la}" "${la}.fixed" && \ /bin/sed -i -e "s:/home/test/autobuild/run/instance-0/output-1:@BASE_DIR@:g" \ -e "s:/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot:@STAGING_DIR@:g" \ -e "s:/home/test/autobuild/run/instance-0/output-1/host/opt/ext-toolchain:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:g" \ -e "s:\(['= ]\)/usr:\\1@STAGING_DIR@/usr:g" \ -e "s:@TOOLCHAIN_EXTERNAL_INSTALL_DIR@:/home/test/autobuild/run/instance-0/output-1/host/opt/ext-toolchain:g" \ -e "s:@STAGING_DIR@:/home/test/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot:g" \ -e "s:@BASE_DIR@:/home/test/autobuild/run/instance-0/output-1:g" \ "${la}.fixed" && \ if cmp -s "${la}" "${la}.fixed"; then \ rm -f "${la}.fixed"; \ else \ mv "${la}.fixed" "${la}"; \ fi || exit 1; \ done >>> sane-backends 1.0.27 Installing to target PATH="/home/test/autobuild/run/instance-0/output-1/host/bin:/home/test/autobuild/run/instance-0/output-1/host/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" /usr/bin/make -j4 DESTDIR=/home/test/autobuild/run/instance-0/output-1/target install -C /home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/ make[1]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' Making install in include make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/include' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/include' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/include' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/include/sane' /usr/bin/install -c -m 644 sane/sane.h sane/saneopts.h '/home/test/autobuild/run/instance-0/output-1/target/usr/include/sane' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/include' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/include' Making install in lib make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/lib' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/lib' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/lib' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/lib' Making install in sanei make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/sanei' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/sanei' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/sanei' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/sanei' Making install in backend make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' /usr/bin/make install-am make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/lib' /bin/bash ../libtool --silent --mode=install /usr/bin/install -c libsane.la '/home/test/autobuild/run/instance-0/output-1/target/usr/lib' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/lib/sane' /bin/bash ../libtool --silent --mode=install /usr/bin/install -c libsane-abaton.la libsane-agfafocus.la libsane-apple.la libsane-artec.la libsane-artec_eplus48u.la libsane-as6e.la libsane-avision.la libsane-bh.la libsane-canon.la libsane-canon630u.la libsane-canon_dr.la libsane-cardscan.la libsane-coolscan.la libsane-coolscan2.la libsane-coolscan3.la libsane-dc25.la libsane-dmc.la libsane-epjitsu.la libsane-epson.la libsane-epson2.la libsane-fujitsu.la libsane-genesys.la libsane-gt68xx.la libsane-hp.la libsane-hp3500.la libsane-hp3900.la libsane-hp4200.la libsane-hp5400.la libsane-hp5590.la libsane-hpljm1005.la libsane-hs2p.la libsane-ibm.la libsane-kodak.la libsane-kodakaio.la libsane-kvs1025.la libsane-kvs20xx.la libsane-leo.la libsane-lexmark.la libsane-ma1509.la libsane-magicolor.la libsane-matsushita.la libsane-microtek.la libsane-microtek2.la libsane-mustek.la libsane-mustek_usb.la libsane-nec.la libsane-net.la libsane-niash.la libsane-pie.la libsane-pieusb.la libsane-pixma.la libsane-plustek.la libsane-plustek_pp.la libsane-qcam.la libsane-ricoh.la libsane-rts8891.la libsane-s9036.la libsane-sceptre.la libsane-sharp.la libsane-sm3600.la libsane-sm3840.la libsane-snapscan.la libsane-sp15c.la libsane-st400.la libsane-stv680.la libsane-tamarack.la libsane-teco1.la libsane-teco2.la libsane-teco3.la libsane-test.la libsane-u12.la libsane-umax.la libsane-umax_pp.la libsane-umax1220u.la libsane-xerox_mfp.la libsane-p5.la libsane-dll.la '/home/test/autobuild/run/instance-0/output-1/target/usr/lib/sane' libtool: install: warning: remember to run `libtool --finish /usr/lib' libtool: install: warning: remember to run `libtool --finish /usr/lib/sane' /usr/bin/make install-data-hook make[5]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \ /bin/bash ../mkinstalldirs /home/test/autobuild/run/instance-0/output-1/target/usr/share/sane/${dir} ; \ done rm -f /home/test/autobuild/run/instance-0/output-1/target/usr/lib/sane/libsane.* mkdir -p -- /home/test/autobuild/run/instance-0/output-1/target/usr/share/sane/artec_eplus48u test -z "/etc/sane.d" || /bin/mkdir -p "/home/test/autobuild/run/instance-0/output-1/target/etc/sane.d" test -z "/etc/sane.d/dll.d" || /bin/mkdir -p "/home/test/autobuild/run/instance-0/output-1/target/etc/sane.d/dll.d" mkdir -p -- /home/test/autobuild/run/instance-0/output-1/target/usr/share/sane/gt68xx installing abaton.conf in /etc/sane.d/abaton.conf... mkdir -p -- /home/test/autobuild/run/instance-0/output-1/target/usr/share/sane/snapscan installing agfafocus.conf in /etc/sane.d/agfafocus.conf... installing apple.conf in /etc/sane.d/apple.conf... installing artec.conf in /etc/sane.d/artec.conf... mkdir -p -- /home/test/autobuild/run/instance-0/output-1/target/usr/share/sane/epjitsu installing artec_eplus48u.conf in /etc/sane.d/artec_eplus48u.conf... installing avision.conf in /etc/sane.d/avision.conf... installing bh.conf in /etc/sane.d/bh.conf... installing canon.conf in /etc/sane.d/canon.conf... installing canon630u.conf in /etc/sane.d/canon630u.conf... installing canon_dr.conf in /etc/sane.d/canon_dr.conf... installing cardscan.conf in /etc/sane.d/cardscan.conf... installing coolscan.conf in /etc/sane.d/coolscan.conf... installing coolscan2.conf in /etc/sane.d/coolscan2.conf... installing coolscan3.conf in /etc/sane.d/coolscan3.conf... installing dc25.conf in /etc/sane.d/dc25.conf... installing dmc.conf in /etc/sane.d/dmc.conf... installing epjitsu.conf in /etc/sane.d/epjitsu.conf... installing epson.conf in /etc/sane.d/epson.conf... installing epson2.conf in /etc/sane.d/epson2.conf... installing fujitsu.conf in /etc/sane.d/fujitsu.conf... installing genesys.conf in /etc/sane.d/genesys.conf... installing gt68xx.conf in /etc/sane.d/gt68xx.conf... installing hp.conf in /etc/sane.d/hp.conf... installing hp3900.conf in /etc/sane.d/hp3900.conf... installing hp4200.conf in /etc/sane.d/hp4200.conf... installing hp5400.conf in /etc/sane.d/hp5400.conf... installing hs2p.conf in /etc/sane.d/hs2p.conf... installing ibm.conf in /etc/sane.d/ibm.conf... installing kodak.conf in /etc/sane.d/kodak.conf... installing kodakaio.conf in /etc/sane.d/kodakaio.conf... installing kvs1025.conf in /etc/sane.d/kvs1025.conf... installing leo.conf in /etc/sane.d/leo.conf... installing lexmark.conf in /etc/sane.d/lexmark.conf... installing ma1509.conf in /etc/sane.d/ma1509.conf... installing magicolor.conf in /etc/sane.d/magicolor.conf... installing matsushita.conf in /etc/sane.d/matsushita.conf... installing microtek.conf in /etc/sane.d/microtek.conf... installing microtek2.conf in /etc/sane.d/microtek2.conf... installing mustek.conf in /etc/sane.d/mustek.conf... installing mustek_usb.conf in /etc/sane.d/mustek_usb.conf... installing nec.conf in /etc/sane.d/nec.conf... installing net.conf in /etc/sane.d/net.conf... installing pie.conf in /etc/sane.d/pie.conf... installing pieusb.conf in /etc/sane.d/pieusb.conf... installing pixma.conf in /etc/sane.d/pixma.conf... installing plustek.conf in /etc/sane.d/plustek.conf... installing plustek_pp.conf in /etc/sane.d/plustek_pp.conf... installing qcam.conf in /etc/sane.d/qcam.conf... installing ricoh.conf in /etc/sane.d/ricoh.conf... installing rts8891.conf in /etc/sane.d/rts8891.conf... installing s9036.conf in /etc/sane.d/s9036.conf... installing sceptre.conf in /etc/sane.d/sceptre.conf... installing sharp.conf in /etc/sane.d/sharp.conf... installing sm3840.conf in /etc/sane.d/sm3840.conf... installing snapscan.conf in /etc/sane.d/snapscan.conf... installing sp15c.conf in /etc/sane.d/sp15c.conf... installing st400.conf in /etc/sane.d/st400.conf... installing stv680.conf in /etc/sane.d/stv680.conf... installing tamarack.conf in /etc/sane.d/tamarack.conf... installing teco1.conf in /etc/sane.d/teco1.conf... installing teco2.conf in /etc/sane.d/teco2.conf... installing teco3.conf in /etc/sane.d/teco3.conf... installing test.conf in /etc/sane.d/test.conf... installing u12.conf in /etc/sane.d/u12.conf... installing umax.conf in /etc/sane.d/umax.conf... installing umax_pp.conf in /etc/sane.d/umax_pp.conf... installing umax1220u.conf in /etc/sane.d/umax1220u.conf... installing xerox_mfp.conf in /etc/sane.d/xerox_mfp.conf... installing p5.conf in /etc/sane.d/p5.conf... installing saned.conf in /etc/sane.d/saned.conf... installing dll.conf in /etc/sane.d/dll.conf... make[5]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/backend' Making install in frontend make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' make[3]: Nothing to be done for `install-data-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/sbin' /bin/bash ../libtool --mode=install /usr/bin/install -c scanimage '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c saned '/home/test/autobuild/run/instance-0/output-1/target/usr/sbin' libtool: install: /usr/bin/install -c scanimage /home/test/autobuild/run/instance-0/output-1/target/usr/bin/scanimage libtool: install: /usr/bin/install -c saned /home/test/autobuild/run/instance-0/output-1/target/usr/sbin/saned make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/frontend' Making install in tools make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' /usr/bin/make install-am make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig' /bin/bash ../libtool --mode=install /usr/bin/install -c sane-find-scanner gamma4scanimage umax_pp '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' /usr/bin/install -c -m 644 sane-backends.pc '/home/test/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig' /usr/bin/install -c sane-config '/home/test/autobuild/run/instance-0/output-1/target/usr/bin' libtool: install: /usr/bin/install -c sane-find-scanner /home/test/autobuild/run/instance-0/output-1/target/usr/bin/sane-find-scanner libtool: install: /usr/bin/install -c gamma4scanimage /home/test/autobuild/run/instance-0/output-1/target/usr/bin/gamma4scanimage libtool: install: /usr/bin/install -c umax_pp /home/test/autobuild/run/instance-0/output-1/target/usr/bin/umax_pp make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/tools' Making install in po make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/po' if test "sane-backends" = "gettext-tools"; then \ /bin/mkdir -p /home/test/autobuild/run/instance-0/output-1/target/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /home/test/autobuild/run/instance-0/output-1/target/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /home/test/autobuild/run/instance-0/output-1/target/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/po' Making install in testsuite make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' Making install in sanei make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/sanei' Making install in tools make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite/tools' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27/testsuite' make[2]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[3]: Entering directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/home/test/autobuild/run/instance-0/output-1/target/usr/share/doc/sane-backends' /usr/bin/install -c -m 644 AUTHORS ChangeLog COPYING LICENSE NEWS PROBLEMS PROJECTS README README.aix README.beos README.darwin README.djpeg README.freebsd README.hp-ux README.linux README.netbsd README.openbsd README.os2 README.solaris README.unixware2 README.unixware7 README.windows README.zeta '/home/test/autobuild/run/instance-0/output-1/target/usr/share/doc/sane-backends' make[3]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[2]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' make[1]: Leaving directory `/home/test/autobuild/run/instance-0/output-1/build/sane-backends-1.0.27' >>> Finalizing target directory # Check files that are touched by more than one package ./support/scripts/check-uniq-files -t target /home/test/autobuild/run/instance-0/output-1/build/packages-file-list.txt ./support/scripts/check-uniq-files -t staging /home/test/autobuild/run/instance-0/output-1/build/packages-file-list-staging.txt Warning: staging file "./usr/lib32" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/mtab" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] Warning: staging file "./etc/resolv.conf" is touched by more than one package: [u'skeleton-init-common', u'toolchain-external-custom'] ./support/scripts/check-uniq-files -t host /home/test/autobuild/run/instance-0/output-1/build/packages-file-list-host.txt Warning: host file "./share/info/dir" is touched by more than one package: [u'host-tar', u'host-m4', u'host-libtool', u'host-autoconf', u'host-automake'] /bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~console::respawn:/sbin/getty -L console 0 vt100 #~' /home/test/autobuild/run/instance-0/output-1/target/etc/inittab /bin/sed -i -e '/^#.*-o remount,rw \/$/s~^#\+~~' /home/test/autobuild/run/instance-0/output-1/target/etc/inittab if grep -q CONFIG_ASH=y ./.config; then grep -qsE '^/bin/ash$' /home/test/autobuild/run/instance-0/output-1/target/etc/shells || echo "/bin/ash" >> /home/test/autobuild/run/instance-0/output-1/target/etc/shells; fi grep: ./.config: No such file or directory if grep -q CONFIG_HUSH=y ./.config; then grep -qsE '^/bin/hush$' /home/test/autobuild/run/instance-0/output-1/target/etc/shells || echo "/bin/hush" >> /home/test/autobuild/run/instance-0/output-1/target/etc/shells; fi grep: ./.config: No such file or directory mkdir -p /home/test/autobuild/run/instance-0/output-1/host/etc/meson sed -e "s%@TARGET_CROSS@%/home/test/autobuild/run/instance-0/output-1/host/bin/arm-linux-%g" -e "s%@TARGET_ARCH@%arm%g" -e "s%@TARGET_CPU@%arm1176jzf-s%g" -e "s%@TARGET_ENDIAN@%"little"%g" -e "s%@TARGET_CFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%`printf '"%s", ' -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 `@PKG_TARGET_CFLAGS@%g" -e "s%@HOST_DIR@%/home/test/autobuild/run/instance-0/output-1/host%g" package/meson//cross-compilation.conf.in > /home/test/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf.in sed -e "s%@PKG_TARGET_CFLAGS@%%g" -e "s%@PKG_TARGET_LDFLAGS@%%g" -e "s%@PKG_TARGET_CXXFLAGS@%%g" /home/test/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf.in > /home/test/autobuild/run/instance-0/output-1/host/etc/meson/cross-compilation.conf mkdir -p /home/test/autobuild/run/instance-0/output-1/target/etc echo "buildroot" > /home/test/autobuild/run/instance-0/output-1/target/etc/hostname /bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/test/autobuild/run/instance-0/output-1/target/etc/hosts mkdir -p /home/test/autobuild/run/instance-0/output-1/target/etc echo "Welcome to Buildroot" > /home/test/autobuild/run/instance-0/output-1/target/etc/issue /bin/sed -i -e s,^root:[^:]*:,root::, /home/test/autobuild/run/instance-0/output-1/target/etc/shadow rm -f /home/test/autobuild/run/instance-0/output-1/target/bin/sh rm -f /home/test/autobuild/run/instance-0/output-1/build/locales.nopurge for i in C en_US locale-archive; do echo $i >> /home/test/autobuild/run/instance-0/output-1/build/locales.nopurge; done for dir in ; do for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/test/autobuild/run/instance-0/output-1/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/test/autobuild/run/instance-0/output-1/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/test/autobuild/run/instance-0/output-1/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/test/autobuild/run/instance-0/output-1/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/include /home/test/autobuild/run/instance-0/output-1/target/usr/share/aclocal \ /home/test/autobuild/run/instance-0/output-1/target/usr/lib/pkgconfig /home/test/autobuild/run/instance-0/output-1/target/usr/share/pkgconfig \ /home/test/autobuild/run/instance-0/output-1/target/usr/lib/cmake /home/test/autobuild/run/instance-0/output-1/target/usr/share/cmake find /home/test/autobuild/run/instance-0/output-1/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/test/autobuild/run/instance-0/output-1/target/lib/ /home/test/autobuild/run/instance-0/output-1/target/usr/lib/ /home/test/autobuild/run/instance-0/output-1/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f find: `/home/test/autobuild/run/instance-0/output-1/target/usr/libexec/': No such file or directory rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/share/gdb rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/share/bash-completion rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/share/zsh rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/man /home/test/autobuild/run/instance-0/output-1/target/usr/share/man rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/info /home/test/autobuild/run/instance-0/output-1/target/usr/share/info rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/doc /home/test/autobuild/run/instance-0/output-1/target/usr/share/doc rm -rf /home/test/autobuild/run/instance-0/output-1/target/usr/share/gtk-doc rmdir /home/test/autobuild/run/instance-0/output-1/target/usr/share 2>/dev/null || true find /home/test/autobuild/run/instance-0/output-1/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/test/autobuild/run/instance-0/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/test/autobuild/run/instance-0/output-1/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/test/autobuild/run/instance-0/output-1/host/bin/arm-linux-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/test/autobuild/run/instance-0/output-1/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/test/autobuild/run/instance-0/output-1/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/test/autobuild/run/instance-0/output-1/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=2019.11-git-01685-ga87c617"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2019.11-git"; \ echo "PRETTY_NAME=\"Buildroot 2019.11-git\"" \ ) > /home/test/autobuild/run/instance-0/output-1/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/test/autobuild/run/instance-0/output-1/target/etc >>> Sanitizing RPATH in target tree /home/test/autobuild/run/instance-0/buildroot/support/scripts/fix-rpath target touch /home/test/autobuild/run/instance-0/output-1/target/usr make: Leaving directory `/home/test/autobuild/run/instance-0/buildroot' make: Entering directory `/home/test/autobuild/run/instance-0/buildroot' >>> Buildroot 2019.11-git-01685-ga87c617 Collecting legal info COPYING: OK (sha256: 9755181e27175cb3510b4da8629caa406fb355a19aa8e7d55f06bf8ab33323c4) >>> toolchain-external Collecting legal info >>> host-skeleton Collecting legal info >>> host-tar 1.29 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> skeleton Collecting legal info >>> skeleton-init-sysv Collecting legal info >>> skeleton-init-common Collecting legal info >>> toolchain-external-custom Collecting legal info >>> toolchain Collecting legal info >>> arptables 0.0.4 Collecting legal info >>> bsdiff 4.3 Collecting legal info ERROR: No hash found for bsdiff.c >>> bzip2 1.0.8 Collecting legal info LICENSE: OK (sha256: c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3) >>> busybox 1.31.0 Collecting legal info LICENSE: OK (sha256: bbfc9843646d483c334664f651c208b9839626891d8f17604db2146962f43548) >>> host-checksec 2.1.0 Collecting legal info LICENSE.txt: OK (sha256: c5e2a8e188040fc34eb9362084778a2e25f8d1f888e47a2be09efa7cecd9c70d) >>> host-dfu-util 0.9 Collecting legal info COPYING: OK (sha256: 32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670) >>> host-libusb 1.0.23 Collecting legal info COPYING: OK (sha256: 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a) >>> host-pkgconf 1.6.1 Collecting legal info COPYING: OK (sha256: 07ee94b50a41ee3fc4e13a9b9c60b26fc28488494c465639f7e5f07a3952ec04) >>> flashbench 2e30b1968a66147412f21002ea844122a0d5e2f0 Collecting legal info ERROR: No hash found for COPYING >>> fping 4.2 Collecting legal info COPYING: OK (sha256: 6051b27e4b4a648f7bc8b329024da53a6e95ce88fcf0ccc259c371a74b741757) >>> glm 0.9.9.5 Collecting legal info manual.md: OK (sha256: 337130631a714eeae017556cad101d5324c2961214120b6214741d3d43667086) >>> host-cmake 3.8.2 Collecting legal info Copyright.txt: OK (sha256: af3030e1bf1af2f534430fdfe3cfc5a617966648a2a7f0c06a631adc92be1e5f) >>> inconsolata 001.010 Collecting legal info ERROR: No hash found for OFL.txt >>> initscripts Collecting legal info >>> iperf 2.0.13 Collecting legal info COPYING: OK (sha256: 5f9f5c4feca3347c3b3c0ada8b16b4e6b698aac4e6f016a24adf61a5915336d1) >>> json-c 0.13.1 Collecting legal info COPYING: OK (sha256: 74c1e6ca5eba76b54d0ad00d4815c8315c1b3bc45ff99de61d103dc92486284c) >>> libcdio 2.1.0 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> libsilk 4268a02240c35c6055b0f237c46b09b2dcf79e45 Collecting legal info COPYING: OK (sha256: 62a5963f034024665641f4a9888b208f1e39aa7e29e87c9634fdcf07d3073baf) >>> host-autoconf 2.69 Collecting legal info COPYINGv3: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) COPYING.EXCEPTION: OK (sha256: 23ed0b84fa023bfa33433b498192cd08a3bfb1f4864a8ed791a84f3eb48b2dd2) >>> host-libtool 2.4.6 Collecting legal info COPYING: OK (sha256: 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643) libltdl/COPYING.LIB: OK (sha256: dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551) >>> host-m4 1.4.18 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> host-automake 1.15.1 Collecting legal info COPYING: OK (sha256: ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6) >>> lockdev 1.0.3 Collecting legal info ERROR: No hash found for LICENSE >>> nanocom 1.0 Collecting legal info ERROR: No hash found for COPYING >>> host-patchelf 0.9 Collecting legal info COPYING: OK (sha256: 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903) >>> pugixml 1.9 Collecting legal info readme.txt: OK (sha256: 5f2318fdea73711b4761fd395462a51dc7d4626088ebaa41732b598821ac935a) >>> host-python-lxml 4.4.0 Collecting legal info LICENSES.txt: OK (sha256: 41d49dd406aa0e1548a6d5f21a30d6bf638b3cd96eb7289dd348d83ed2e40392) doc/licenses/BSD.txt: OK (sha256: 69edb445c1335a8312d4c09271847e9956d84f0d9f724d125340cc3fad767b2a) doc/licenses/elementtree.txt: OK (sha256: 0497ae8138811ef4466ede653bab7a59feb3d3c14f9ed50fc33a00aeb5bec32e) src/lxml/isoschematron/resources/rng/iso-schematron.rng: OK (sha256: 56c5b13f28b78958890c36e3249c34c169041e42ebcfdce8080f3324ba2bf4de) >>> host-libxml2 2.9.9 Collecting legal info COPYING: OK (sha256: c5c63674f8a83c4d2e385d96d1c670a03cb871ba2927755467017317878574bd) >>> host-libxslt 1.1.33 Collecting legal info COPYING: OK (sha256: 7e48e290b6bfccc2ec1b297023a1d77f2fd87417f71fbb9f50aabef40a851819) >>> host-python 2.7.16 Collecting legal info LICENSE: OK (sha256: a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c) >>> host-expat 2.2.8 Collecting legal info COPYING: OK (sha256: 46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76) >>> host-zlib Collecting legal info >>> host-libzlib 1.2.11 Collecting legal info README: OK (sha256: 7960b6b1cc63e619abb77acaea5427159605afee8c8b362664f4effc7d7f7d15) >>> host-python-setuptools 41.0.1 Collecting legal info LICENSE: OK (sha256: c32a3ac395af6321efd28be73d06a00f0db6ab887d1c21d4fec46128d2056d5a) >>> host-python-xlrd 1.2.0 Collecting legal info LICENSE: OK (sha256: b5a5dbce60265e305a815a6cb83ed07f24519d8ba644f2a307994488bced8815) >>> rsh-redone 85 Collecting legal info ERROR: No hash found for rsh.c >>> sane-backends 1.0.27 Collecting legal info COPYING: OK (sha256: dcc100d4161cc0b7177545ab6e47216f84857cda3843847c792a25289852dcaa) WARNING: the Buildroot source code has not been saved WARNING: toolchain-external-custom: cannot save license (TOOLCHAIN_EXTERNAL_CUSTOM_LICENSE_FILES not defined) WARNING: arptables-0.0.4: cannot save license (ARPTABLES_LICENSE_FILES not defined) Legal info produced in /home/test/autobuild/run/instance-0/output-1/legal-info make: Leaving directory `/home/test/autobuild/run/instance-0/buildroot'